[Asteriskbrasil-biz] Integração Siemens Hipath 3800 via E1 / ISDN. | Suporte Pago!

[Jefferson Carvalho]

Olá Lista,

Estou necessitando de suporte (pago) para integração do Asterisk com uma central
siemens (hipath 3800) via E1 (ISDN).

Já fiz várias tentativas com diversos protocolos (EuroISDN , QSIG_etc.)  e não obtive sucesso.

A conexão com a siemens é usando um cabo cross RJ48C -> BNC15 (male) ;
Inicialmente eu usei uma placa da digium (te420 / pcie) e depois
mudei para uma sangoma A104d ; com a digium , sempre existia o alarme
yellow já com a sangoma o alarme não era apresentado , embora o protocolo
sempre seja down.

A útima configuração de sinalização que ficou na siemens foi (S2M : Linha direta de rede europp)
tambem tentei , S0 , ECMA Q.SIG e por aí vai... Estou sinalizando como master e a siemens como
slave , já tentei o inverso também.

Seguem algumas informações para debug:

pri set debug on span 1
Enabled debugging on span 1
TEI=0 Sending SABME
TEI=0 Sending SABME
TEI=0 Sending SABME
TEI=0 MDL-ERROR (G): T200 expired N200 times sending SABME in state 5(Awaiting establishment)
Changing from state 5(Awaiting establishment) to 4(TEI assigned)
TEI=0 DL event: Q931_DL_EVENT_DL_RELEASE_IND(3)
SAPI/TEI=0/0 Kick starting link
TEI=0 Sending SABME
Changing from state 4(TEI assigned) to 5(Awaiting establishment)
TEI=0 Sending SABME

**

pri show spans
PRI span 1/0: Provisioned, Down, Active

**

cat /proc/dahdi/1
Span 1: WPE1/0 "wanpipe1 card 0" (MASTER) HDB3/CCS

           1 WPE1/0/1 Clear (In use) (EC: MG2 - INACTIVE)
           2 WPE1/0/2 Clear (In use) (EC: MG2 - INACTIVE)
           3 WPE1/0/3 Clear (In use) (EC: MG2 - INACTIVE)
           4 WPE1/0/4 Clear (In use) (EC: MG2 - INACTIVE)
           5 WPE1/0/5 Clear (In use) (EC: MG2 - INACTIVE)
           6 WPE1/0/6 Clear (In use) (EC: MG2 - INACTIVE)
           7 WPE1/0/7 Clear (In use) (EC: MG2 - INACTIVE)
           8 WPE1/0/8 Clear (In use) (EC: MG2 - INACTIVE)
           9 WPE1/0/9 Clear (In use) (EC: MG2 - INACTIVE)
          10 WPE1/0/10 Clear (In use) (EC: MG2 - INACTIVE)
          11 WPE1/0/11 Clear (In use) (EC: MG2 - INACTIVE)
          12 WPE1/0/12 Clear (In use) (EC: MG2 - INACTIVE)
          13 WPE1/0/13 Clear (In use) (EC: MG2 - INACTIVE)
          14 WPE1/0/14 Clear (In use) (EC: MG2 - INACTIVE)
          15 WPE1/0/15 Clear (In use) (EC: MG2 - INACTIVE)
          16 WPE1/0/16 Hardware-assisted HDLC (In use)
          17 WPE1/0/17 Clear (In use) (EC: MG2 - INACTIVE)
          18 WPE1/0/18 Clear (In use) (EC: MG2 - INACTIVE)
          19 WPE1/0/19 Clear (In use) (EC: MG2 - INACTIVE)
          20 WPE1/0/20 Clear (In use) (EC: MG2 - INACTIVE)
          21 WPE1/0/21 Clear (In use) (EC: MG2 - INACTIVE)
          22 WPE1/0/22 Clear (In use) (EC: MG2 - INACTIVE)
          23 WPE1/0/23 Clear (In use) (EC: MG2 - INACTIVE)
          24 WPE1/0/24 Clear (In use) (EC: MG2 - INACTIVE)
          25 WPE1/0/25 Clear (In use) (EC: MG2 - INACTIVE)
          26 WPE1/0/26 Clear (In use) (EC: MG2 - INACTIVE)
          27 WPE1/0/27 Clear (In use) (EC: MG2 - INACTIVE)
          28 WPE1/0/28 Clear (In use) (EC: MG2 - INACTIVE)
          29 WPE1/0/29 Clear (In use) (EC: MG2 - INACTIVE)
          30 WPE1/0/30 Clear (In use) (EC: MG2 - INACTIVE)
          31 WPE1/0/31 Clear (In use) (EC: MG2 - INACTIVE)

***

 cat /proc/interrupts
           CPU0       CPU1       CPU2       CPU3
  0:    9035563      12707      13643      12688    IO-APIC-edge  timer
  1:       1362       1410          1         17    IO-APIC-edge  i8042
  8:          2          1          0          0    IO-APIC-edge  rtc
  9:          0          0          0          0   IO-APIC-level  acpi
 12:          0          0          2          2    IO-APIC-edge  i8042
 82:         28          0          0      14193         PCI-MSI  eth0
177:       1893       2929    9023337       2931   IO-APIC-level  ehci_hcd:usb1, wanpipe1
217:          9          9          8          5   IO-APIC-level  ehci_hcd:usb2
225:       1457       1389      20117      20129   IO-APIC-level  ata_piix, ata_piix
NMI:          0          0          0          0
LOC:    9073670    9073678    9073688    9073687
ERR:          0
MIS:          0


***
#Sangoma A104 port 1 [slot:4 bus:3 span:1] <wanpipe1>
span=1,1,0,ccs,hdb3
bchan=1-15,17-31
echocanceller=mg2,1-15,17-31
hardhdlc=16


Caso alguem tenha interesse do suporte pago e já tenha experiência nesse tipo de integração,
aguardo contato em privado.


-Jefferson Carvalho
 CEO
 IP Carrier Telecom INC.
 111 NE 1st ST - 3rd Floor
 Miami-FL 33132
 Ph.  +1.305-5375390 (direct)
 Mob. +55.86-99510000
 Skype: jeffpcarvalho
 MSN: jeff em carvalho.me