[AsteriskBrasil] E1 R2 - problema na inicializacao do asterisk

Quarta Fevereiro 15 17:30:52 BRST 2006

Olá Lista;

segui várias vezes o que está em http://zarzamora.com.mx/asterisk/48

Tentei também o Caio Begotti escreveu anteiormente para a lista, mas 
sempre dá o mesmo erro!

O erro:

#asterisk -vvvvvv&
<....>
   == Parsing '/etc/asterisk/unicall.conf': Found
Loading protocol mfcr2
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/1 Call control(8)
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/1 Unblock
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/1 1001  ->      [1/40000000/Idle          /Idle         ]
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/1 Channel gains
     -- Registered channel 1, mfcr2 signalling
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/2 Call control(8)
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/2 Unblock
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/2 1001  ->      [1/40000000/Idle          /Idle         ]
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/2 Channel gains
     -- Registered channel 2, mfcr2 signalling
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/3 Call control(8)
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/3 Unblock
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/3 1001  ->      [1/40000000/Idle          /Idle         ]
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/3 Channel gains
     -- Registered channel 3, mfcr2 signalling
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/4 Call control(8)
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/4 Unblock
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/4 1001  ->      [1/40000000/Idle          /Idle         ]
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/4 Channel gains
     -- Registered channel 4, mfcr2 signalling
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/5 Call control(8)
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/5 Unblock
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/5 1001  ->      [1/40000000/Idle          /Idle         ]
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/5 Channel gains
     -- Registered channel 5, mfcr2 signalling
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/6 Call control(8)
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/6 Unblock
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/6 1001  ->      [1/40000000/Idle          /Idle         ]
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/6 Channel gains
     -- Registered channel 6, mfcr2 signalling
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/7 Call control(8)
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/7 Unblock
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/7 1001  ->      [1/40000000/Idle          /Idle         ]
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/7 Channel gains
     -- Registered channel 7, mfcr2 signalling
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/8 Call control(8)
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/8 Unblock
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/8 1001  ->      [1/40000000/Idle          /Idle         ]
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/8 Channel gains
     -- Registered channel 8, mfcr2 signalling
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/9 Call control(8)
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/9 Unblock
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/9 1001  ->      [1/40000000/Idle          /Idle         ]
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/9 Channel gains
     -- Registered channel 9, mfcr2 signalling
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/10 Call control(8)
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/10 Unblock
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/10 1001  ->      [1/40000000/Idle          /Idle         ]
Feb 15 13:49:39 WARNING[10307]: chan_unicall.c:627 unicall_report: 
MFC/R2 UniCall/10 Channel gains
     -- Registered channel 10, mfcr2 signalling
Parsing tone set
Hit dial-tone
Step - Frequency=350.00+440.00 [1.00%]Level=-13.00+-13.00 Recognition 
length=0.30 [10.00%]
 >>>Detector element        350        440        300          0
Hit dial-tone
Step - Cycles=3
Step - Frequency=350.00+440.00 [1.00%]Level=-13.00+-13.00Length=0.10 
[10.00%]
 >>>Detector element        350        440         60        140
Step - Length=0.10 [10.00%]
 >>>Detector element          0          0         60        140
Step - Frequency=350.00+440.00 [1.00%]Level=-13.00+-13.00 Recognition 
length=0.30 [10.00%]
 >>>Detector element        350        440        300          0
Hit ringback-tone
Step - Cycles=0
Step - Frequency=440.00+480.00 [1.00%]Level=-13.00+-13.00Length=0.40 
[10.00%]
 >>>Detector element        440        480        330        470
Step - Length=0.20 [10.00%]
 >>>Detector element          0          0        150        250
Step - Frequency=440.00+480.00 [1.00%]Level=-13.00+-13.00Length=0.40 
[10.00%]
 >>>Detector element        440        480        330        470
Step - Length=3.00 [10.00%] Recognition length=0.60 [10.00%]
 >>>Detector element          0          0        600       3330
Hit busy-tone
Step - Cycles=0
Step - Frequency=480.00+620.00 [1.00%]Level=-13.00+-13.00Length=0.50 
[10.00%]
 >>>Detector element        480        620        420        580
Step - Length=0.50 [10.00%]
 >>>Detector element          0          0        420        580
Hit congestion-tone
Step - Cycles=0
Step - Frequency=480.00+620.00 [1.00%]Level=-13.00+-13.00Length=0.25 
[10.00%]
 >>>Detector element        480        620        195        305
Step - Length=0.25 [10.00%]
 >>>Detector element          0          0        195        305
Hit number-unobtainable-tone
Step - Frequency=480.00+620.00 [1.00%]Level=-13.00+-13.00 Recognition 
length=0.90 [10.00%]
 >>>Detector element        480        620        900          0
   == Registered channel type 'UniCall' (Unified call processing 
(UniCall) driver)
  [skipping chan_alsa.so]
  [chan_zap.so] => (Zapata Telephony w/PRI)
   == Parsing '/etc/asterisk/zapata.conf': Found
Feb 15 13:49:39 ERROR[10307]: chan_zap.c:10606 setup_zap: Unknown 
signalling method 'r2'
Feb 15 13:49:39 ERROR[10307]: chan_zap.c:10231 setup_zap: Signalling 
must be specified before any channels are.
Feb 15 13:49:39 WARNING[10307]: loader.c:414 __load_resource: 
chan_zap.so: load_module failed, returning -1
Feb 15 13:49:39 WARNING[10307]: loader.c:554 load_modules: Loading 
module chan_zap.so failed!

As configurações:
[unicall.conf]
[channels]
language=br
context=from-internal
usecallerid=yes
hidecallerid=no
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes

echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
echotraining=400

rxgain=0.0
txgain=0.0

callgroup=1
pickupgroup=1

immediate=no

loglevel=255
protocolclass=mfcr2
protocolvariant=br,20,13
protocolend=cpe

group = 1
channel => 1-10

[zapata.conf]
  [channels]
    language=br
    context=default
    switchtype=euroisdn
    signalling=pri_cpe
    usecallerid=yes
    hidecallerid=no
    callwaiting=yes
    usecallingpres=yes
    callwaitingcallerid=yes
    threewaycalling=yes
    transfer=yes
    cancallforward=yes
    callreturn=yes
    echocancel=yes
    echocancelwhenbridged=yes
    rxgain=0.0
    txgain=0.0
    callgroup=1
    pickupgroup=1
    immediate=no

    group = 1
    channel => 1-10

[zaptel.conf]
# Global data
loadzone        = br
defaultzone     = br

span=1,1,0,cas,hdb3
cas=1-10:1101
dchan=11

-- 
Esta mensagem foi verificada pelo sistema de anti-virus e
 acredita-se estar livre de perigo.