[AsteriskBrasil] MFC/R2 e Asterisk.

[Josué Conti]

Olá Fernando, só uma idéia vc trabalha com MCDU?
Tente isso no Unicall.conf:
callerid="Seu tronco chave com DDD"
musiconhold=default
protocolclass=mfcr2
protocolvariant=br,10,4
protocolend=cpe
group = 1
channel=> 1-31
protocolclass=mfcr2

Abraço e boa sorte.

Josué

2006/6/2, Fernando Lujan <fernando.lujan em mandic.com.br>:
>
> Estou tendo problemas para usar o unicall no asterisk. Já tentei fazer
> todas as configurações que encontrei na internet e ainda tenho
> problemas. Aqui segue o problema:
>
> Fazendo uma ligação do asterisk para fora:
>
>    -- Accepting UNAUTHENTICATED call from 192.168.1.59:
>       > requested format = gsm,
>       > requested prefs = (),
>       > actual format = gsm,
>       > host prefs = (),
>       > priority = mine
>    -- Executing Dial("IAX2/guest-1", "Unicall/g1/44882120") in new stack
> Jun  2 14:55:25 WARNING[26349]: chan_unicall.c:627 unicall_report:
> MFC/R2 UniCall/1 Call control(1)
> Jun  2 14:55:25 WARNING[26349]: chan_unicall.c:627 unicall_report:
> MFC/R2 UniCall/1 Make call
> Jun  2 14:55:25 WARNING[26349]: chan_unicall.c:627 unicall_report:
> MFC/R2 UniCall/1 Making a new call with CRN 32769
> Jun  2 14:55:25 WARNING[26349]: chan_unicall.c:627 unicall_report:
> MFC/R2 UniCall/1 0001  ->      [1/       1/Idle          /Idle         ]
>    -- Called g1/44882120
> Jun  2 14:55:25 WARNING[26349]: chan_unicall.c:2644 handle_uc_event:
> Unicall/1 event Dialing
> Jun  2 14:55:25 WARNING[26349]: chan_unicall.c:627 unicall_report:
> MFC/R2 UniCall/1      <- 1101  [1/      40/Seize         /Idle         ]
> Jun  2 14:55:25 WARNING[26349]: chan_unicall.c:627 unicall_report:
> MFC/R2 UniCall/1 4 on  ->      [2/      40/Group I       /Idle         ]
> Jun  2 14:55:30 WARNING[26349]: chan_unicall.c:627 unicall_report:
> MFC/R2 UniCall/1 R2 prot. err. [2/      40/Group I       /DNIS         ]
> cause 32769 - T1 timed out
> Jun  2 14:55:30 WARNING[26349]: chan_unicall.c:627 unicall_report:
> MFC/R2 UniCall/1 4 off ->      [1/       1/Idle          /Idle         ]
> Jun  2 14:55:30 WARNING[26349]: chan_unicall.c:627 unicall_report:
> MFC/R2 UniCall/1 1001  ->      [1/       1/Idle          /Idle         ]
> Jun  2 14:55:30 WARNING[26349]: chan_unicall.c:2644 handle_uc_event:
> Unicall/1 event Protocol failure
>    -- Unicall/1 protocol error. Cause 32769
> Jun  2 14:55:30 WARNING[26349]: chan_unicall.c:627 unicall_report:
> MFC/R2 UniCall/1 Channel echo cancel
> Jun  2 14:55:30 WARNING[26349]: chan_unicall.c:627 unicall_report:
> MFC/R2 UniCall/1 Channel gains
> Jun  2 14:55:30 WARNING[26349]: chan_unicall.c:627 unicall_report:
> MFC/R2 UniCall/1 Channel switching
>    -- Hungup 'UniCall/1-1'
> == Everyone is busy/congested at this time (1:0/0/1)
> == Auto fallthrough, channel 'IAX2/guest-1' status is 'CHANUNAVAIL'
> Jun  2 14:55:30 WARNING[26339]: chan_unicall.c:627 unicall_report:
> MFC/R2 UniCall/1      <- 1001  [1/       1/Idle          /Idle         ]
> Jun  2 14:55:30 WARNING[26339]: chan_unicall.c:627 unicall_report:
> MFC/R2 UniCall/1 1001  ->      [1/       1/Idle          /Idle         ]
>
>
> Meu sistema:
>
> Slackware 10.1 Kernel: 2.4.31
> Zaptel version 1.2.4
> Asterisk version 1.2.6
> spandsp 0.0.3pre6
> supertone 0.0.2
> libunicall 0.0.3
> libmvcr2 0.0.3
>
> Não compilei o módulo ztdummy e nem a libpri. Com eles compilados o
> problema é o mesmo.
>
> zaptel.conf
>
> loadzone = br
> defaultzone=br
>
> span=1,1,0,cas,hdb3
> cas=1-15:1101
> cas=17-31:1101
>
> unicall.conf:
>
> [channels]
>
> language=br
>
> context=incoming
> usecallerid=yes
> hidecallerid=no
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> rxgain=0.0
> txgain=0.0
> group=1
> callgroup=1
> pickupgroup=1
> immediate=no
> loglevel=255
> protocolclass=mfcr2
> protocolvariant=br,4,11
> protocolend=co
> group = 1
> channel => 1-15
> ;skip time slot 16
> channel => 17-31
>
> extensions.conf
>
> [internal]
>    exten => 1234,1,Dial(Unicall/g1/44882120)
> [incoming]
>    exten => _.,1,Dial(IAX2/guest)
>
>
> Fernando Lujan
> _______________________________________________
> LIsta de discussões AsteriskBrasil.org
> AsteriskBrasil em listas.asteriskbrasil.org
> http://listas.asteriskbrasil.org/mailman/listinfo/asteriskbrasil
>
> _______________________________________________
> Acesse o  wiki AsteriskBrasil.org:
> http://www.asteriskbrasil.org
>
-------------- Próxima Parte ----------
Um anexo em HTML foi limpo...
URL: http://listas.asteriskbrasil.org/pipermail/asteriskbrasil/attachments/20060605/fbc4b26b/attachment-0001.html