[AsteriskBrasil] Problema com E1 R2 EBT - Consigo receber mas não consigo realizar (CONGESTION)
Nivaldo Junior
junior em remoto.com.br
Quarta Setembro 19 15:26:00 BRT 2007
Opa Felipe,
Já utilizei esse tutorial... mas mesmo assim não funcionou...
Quando eu coloco um cabo cross E1 entre os dois servidores, funciona sem
problemas...
--
Nivaldo Montenegro Júnior
Diretor de TI&C
Digivox Soluções de Comunicação Ltda
+ 55 83 4009-8195
+ 55 83 4009-8199 - fax
+ 55 83 8877-0220 - cell
junior em digivox.com.br
http://www.digivox.com.br
Antes de imprimir pense em seu compromisso com o Meio Ambiente
e o comprometimento com os Custos .
____________________________________________________________________________
Esta mensagem e seus anexos podem conter informações confidenciais ou
privilegiadas. Se você não é o destinatário dos mesmos você não está
autorizado a utilizar o material para qualquer fim. Solicitamos que você
apague a mensagem e avise imediatamente ao remetente. O conteúdo desta
mensagem e seus anexos não representam necessariamente a opinião e a
intenção da empresa, não implicando em qualquer obrigação ou
responsabilidade da parte da mesma.
This message may contain confidential and/or privileged information. If you
are not the addressee or authorized to receive this for the addressee, you
must not use, copy, disclose or take any action based on this message or any
information herein. If you have received this message in error, please
advise the sender immediately by reply e-mail and delete this message. The
contents of this message and its attachments do not necessarily express the
opinion or the intention of the company, and do not implies any legal
obligation or responsabilities from this company.
Em Quarta 19 Setembro 2007 14:22, Felipe Neuwald escreveu:
> Nivaldo, boa tarde.
>
> Veja:
> http://ontheroadbrother.blogspot.com/2007/05/asterisk-sinalizao-mfcr2.html
>
> Abs,
>
> Felipe Neuwald.
>
> Nivaldo Junior escreveu:
> > Pessoal,
> >
> > Estou com um problema em um E1 R2D da Embratel.
> > Estou conseguindo receber ligações numa boa, mas não consigo realizar
> > chamadas.
> > Minhas confs:
> >
> > - Asterisk 1.2.14
> > - Zaptel 1.2.12
> >
> > - zaptel.conf
> >
> > loadzone=br
> > defaultzone=br
> > #E1 com 14 canais
> > span=1,0,0,cas,hdb3
> > cas=1-14:1101
> >
> > #E1 com 30 canais
> > span=2,0,0,cas,hdb3
> > cas=32-46:1101
> > cas=48-62:1101
> >
> > - unicall.conf
> >
> > [channels]
> > language=pt_BR
> > usecallerid=yes
> > hidecallerid=no
> > callwaitingcallerid=yes
> > threewaycalling=yes
> > transfer=yes
> > cancallforward=yes
> > callreturn=yes
> > echocancel=yes
> > echocancelwhenbridged=yes
> > relaxdtmf=yes
> > immediate=no
> >
> > ; 14 canais
> > group=0
> > callgroup=0
> > pickupgroup=0
> > protocolclass=mfcr2
> > protocolvariant=br,20,4,8
> > protocolend=pce
> > context=ebt
> > channel => 1-14
> >
> > ; 30 canais
> > group=1
> > callgroup=1
> > pickupgroup=1
> > protocolclass=mfcr2
> > protocolvariant=br,20,4,8
> > protocolend=pce
> > context=ebt
> > channel => 32-46
> > channel => 48-62
> >
> > - Tentando realizar uma chamada:
> >
> > -- Executing Dial("SIP/ramal1-081d9250", "Unicall/g1/40098153") in
> > new stack
> > Sep 19 11:53:58 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 Call control(1)
> > Sep 19 11:53:58 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 Make call
> > Sep 19 11:53:58 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 Making a new call with CRN 32769
> > Sep 19 11:53:58 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 0001 -> [1/ 1/Idle /Idle ]
> > -- Called g1/40098153
> > Sep 19 11:53:58 WARNING[6902]: chan_unicall.c:2644 handle_uc_event:
> > Unicall/32 event Dialing
> > Sep 19 11:53:58 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 <- 1101 [1/ 40/Seize /Idle ]
> > Sep 19 11:53:58 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 4 on -> [2/ 40/Group I /Idle ]
> > Sep 19 11:53:58 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 <- 1 on [2/ 40/Group I /DNIS ]
> > Sep 19 11:53:58 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 4 off -> [2/ 40/Group I /DNIS ]
> > Sep 19 11:53:58 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 <- 1 off [2/ 40/Group I /DNIS ]
> > Sep 19 11:53:58 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 0 on -> [2/ 40/Group I /DNIS ]
> > Sep 19 11:53:59 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 <- 5 on [2/ 40/Group I /DNIS ]
> > Sep 19 11:53:59 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 0 off -> [2/ 40/Group I /DNIS ]
> > Sep 19 11:53:59 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 <- 5 off [2/ 40/Group I /DNIS ]
> > Sep 19 11:53:59 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 Calling party category 0x0
> > Sep 19 11:53:59 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 1 on -> [2/ 40/Group I /DNIS ]
> > Sep 19 11:53:59 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 <- 5 on [2/ 40/Group I /Category ]
> > Sep 19 11:53:59 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 1 off -> [2/ 40/Group I /Category ]
> > Sep 19 11:53:59 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 <- 5 off [2/ 40/Group I /Category ]
> > Sep 19 11:53:59 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 B on -> [2/ 40/Group I /Category ]
> > Sep 19 11:53:59 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 <- 4 on [2/ 40/Group I /End of ANI ]
> > Sep 19 11:53:59 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 B off -> [2/ 40/Group I /End of ANI ]
> > Sep 19 11:53:59 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 <- 4 off [2/ 40/Group I /End of ANI ]
> > Sep 19 11:53:59 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 Far end disconnected(cause=Switching equipment congestion
> > [42]) - state 0x40
> > Sep 19 11:53:59 WARNING[6902]: chan_unicall.c:2644 handle_uc_event:
> > Unicall/32 event Far end disconnected
> > Sep 19 11:53:59 WARNING[6902]: chan_unicall.c:2930 handle_uc_event: CRN
> > 32769 - far disconnected cause=Switching equipment congestion [42]
> > -- Channel 0 got hangup
> > -- UniCall/32-1 is circuit-busy
> > Sep 19 11:53:59 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 Channel gains
> > Sep 19 11:53:59 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 Channel switching
> > Sep 19 11:53:59 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 Call control(6)
> > Sep 19 11:53:59 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 Drop call(cause=Normal Clearing [16])
> > Sep 19 11:53:59 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 Clearing fwd
> > Sep 19 11:53:59 WARNING[6902]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 1001 -> [2/ 800/Clear fwd B /End of ANI ]
> > -- Hungup 'UniCall/32-1'
> > == Everyone is busy/congested at this time (1:0/1/0)
> > == Auto fallthrough, channel 'SIP/ramal1-081d9250' status is
> > 'CONGESTION' Sep 19 11:53:59 WARNING[6897]: chan_unicall.c:627
> > unicall_report: MFC/R2 UniCall/32 <- 1001 [1/ 800/Clear fwd D
> > /Idle ] Sep 19 11:53:59 WARNING[6897]: chan_unicall.c:627
> > unicall_report: MFC/R2 UniCall/32 Call disconnected(cause=Switching
> > equipment congestion [42]) - state 0x800
> > Sep 19 11:53:59 WARNING[6897]: chan_unicall.c:2644 handle_uc_event:
> > Unicall/32 event Drop call
> > Sep 19 11:53:59 WARNING[6897]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 Call control(7)
> > Sep 19 11:53:59 WARNING[6897]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 Release call
> > Sep 19 11:53:59 WARNING[6897]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 Destroying call with CRN 32769
> > Sep 19 11:53:59 WARNING[6897]: chan_unicall.c:2644 handle_uc_event:
> > Unicall/32 event Release call
> > -- Unicall/32 released
> > Sep 19 11:53:59 WARNING[6897]: chan_unicall.c:627 unicall_report: MFC/R2
> > UniCall/32 Channel echo cancel
> >
> > O mais intrigante é que tenho atualmente outros servidores funcionando
> > em R2D sem problemas, mas estou enfrentando este problema e não estou
> > conseguindo resolver.
> > Já troquei de máquina, de placa, de balum, de cabo, enfim, fiz todos os
> > testes e não encontrei o problema.
> > Estou fazendo os testes usando 3 E1, um de 14 canais, e os outros dois de
> > 30 canais cada um.
>
> _______________________________________________
> Compre uma camiseta da AsteriskBrasil.org!
> http://www.voipmania.com.br
> == VoIPMania.com.br ==
>
> _______________________________________________
> LIsta de discussões AsteriskBrasil.org
> AsteriskBrasil em listas.asteriskbrasil.org
> http://listas.asteriskbrasil.org/mailman/listinfo/asteriskbrasil
--
Nivaldo Júnior
junior em remoto.com.br
(83)4009-8195
----------------------------------------
Nexus - Estratégia e Tecnologia
http://www.nexusconsult.com.br
Mais detalhes sobre a lista de discussão AsteriskBrasil