[AsteriskBrasil] RESOLVIDO - Problema de audio entre llamada SIP => ZAP (FXS)
Pedro Jorge Viana de Bragança Menezes
pedro em s3p.es
Sexta Janeiro 25 12:24:02 BRST 2008
Parametro en echotraining
_____
From: Pedro Jorge Viana de Bragança Menezes [mailto:pedro em s3p.es]
To: asteriskbrasil em listas.asteriskbrasil.org
Sent: Fri, 25 Jan 2008 10:19:40 +0100
Subject: [AsteriskBrasil] Problema de audio entre llamada SIP => ZAP (FXS)
Bom dia, tenho um pequeno (grande) problema e gostaria de una luz...
Explico o panorama:
Acabo de instalar TrixBox 2.4.0 com asterisk 1.4.16-1 e zaptel mesma versao (creio)
Instalada 2 placas OpenVox distribuidas da siguiente manera:
1º Placa 4 FXO
2º Placa 2 FXO - 2 FXS
A instalacao foi sem problemas, fiz a retoque no arquivo /etc/sysconfig/zaptel para deixar habilitada somente o modulo wctdm (a openvox é 99,99% compativel Digium)
Fiz praticamente todas as configuracoes pertinentes tanto de ramais sip e analogicos ZAP/5, ZAP/6.
Todos os testes sao satisfatorios, troncais de saida, entrada, grupos, ligacoes entre SIP e externas, um pouco de ruido, etc...
O problema reside no seguinte:
Quando realizo uma ligacao desde um telefone SIP a um ramal analogico (zap/5, zap/6) e quando antendemos nao se escuta absolutamente nada nem por parte de SIP nem por parte de ZAP.
Quanto realizo a ligacao desde ZAP a SIP funciona sin problemas, o audio é correto.
Ja revisei a configuracao 2^n vezes e nao sou capaz de encontrar nada extranho...
Aqui deixo os arquivos de configuracao para ver se alguem com os olhos mais treinados que os meus pode encontrar o erro.
zapata.conf
--------------
;
; Zapata telephony interface
;
; Configuration file
[trunkgroups]
[channels]
language=es
context=from-zaptel
signalling=fxs_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=no
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
;echotraining=800
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=yes
busydetect=yes
busycount=1
answeronpolarityswitch=yes
hanguponpolarityswitch=yes
;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
;Include genzaptelconf configs
#include zapata-channels.conf
group=1
;Include AMP configs
#include zapata_additional.conf
-------------
zaptel-channels.conf:
---
; Autogenerated by /usr/sbin/genzaptelconf -- do not hand edit
; Zaptel Channels Configurations (zapata.conf)
;
; This is not intended to be a complete zapata.conf. Rather, it is
intended
; to be #include-d by /etc/zapata.conf that will include the global
settings
;
; Span 1: WCTDM/0 "Wildcard TDM400P REV E/F Board 1"
;;; line="1 WCTDM/0/0"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 1
context=default
;;; line="2 WCTDM/0/1"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 2
context=default
;;; line="3 WCTDM/0/2"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 3
context=default
;;; line="4 WCTDM/0/3"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 4
context=default
; Span 2: WCTDM/1 "Wildcard TDM400P REV E/F Board 2"
;;; line="5 WCTDM/1/0"
signalling=fxo_ks
callerid="Channel 5" <6005>
mailbox=6005
group=5
busydetect=no
busycount=7
;context=from-zaptel
;context=from-internal
channel => 5
callerid=
mailbox=
group=
rxgain=10
txgain=10
context=default
;;; line="6 WCTDM/1/1"
signalling=fxo_ks
callerid="Channel 6" <6006>
mailbox=6006
group=5
;context=from-zaptel
context=from-internal
channel => 6
callerid=
mailbox=
group=
;context=default
;;; line="7 WCTDM/1/2"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 7
context=default
;;; line="8 WCTDM/1/3"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 8
context=default
---
zapata_additional.conf:
--------
; do not edit this file, this is an auto-generated file by freepbx
; all modifications must be done from the web gui
;;;;;;[205]
signalling=fxo_ks
record_out=Adhoc
record_in=Adhoc
mailbox=205 em device
immediate=no
echotraining=800
echocancelwhenbridged=no
echocancel=yes
dial=ZAP/5
context=from-internal
callprogress=no
callerid=device <205>
busydetect=no
busycount=7
accountcode=
channel=>5
;;;;;;[782]
signalling=fxo_ks
record_out=Adhoc
record_in=Adhoc
mailbox=782 em device
immediate=no
echotraining=800
echocancelwhenbridged=no
echocancel=yes
dial=ZAP/6
context=from-internal
callprogress=no
callerid=device <782>
busydetect=no
busycount=7
accountcode=
channel=>6
-----
cat /proc/zaptel/*
Span 1: WCTDM/0 "Wildcard TDM400P REV E/F Board 1"
1 WCTDM/0/0 FXSKS (In use)
2 WCTDM/0/1 FXSKS (In use)
3 WCTDM/0/2 FXSKS (In use)
4 WCTDM/0/3 FXSKS (In use)
Span 2: WCTDM/1 "Wildcard TDM400P REV E/F Board 2"
5 WCTDM/1/0 FXOKS (In use)
6 WCTDM/1/1 FXOKS (In use)
7 WCTDM/1/2 FXSKS (In use)
8 WCTDM/1/3 FXSKS (In use)
cat /etc/sysconfig/zaptel
#MODULES="$MODULES wctdm24xxp" # TDM2400P - Modular FXS/FXO interface
(1-24 ports)
#MODULES="$MODULES wcfxo" # X100P - Single port FXO interface
# X101P -
Single port FXO interface
MODULES="$MODULES wctdm" # TDM400P - Modular FXS/FXO interface
(1-4 ports)
#MODULES="$MODULES wcusb" # S100U - Single port FXS USB
Interface
#MODULES="$MODULES torisa" # Old Tormenta1 ISA Card
#MODULES="$MODULES ztdummy" # Zaptel Timing Only Interface
----------------------
Quando tenho uma ligacao entre SIP e ZAP:
trixbox1*CLI> show channels
Channel Location State Application(Data)
Zap/5-1 (None) Up Bridged Call(SIP/10-
b7d4dc50)
SIP/10-b7d4dc50 s em macro-dial:10 Up Dial(ZAP/5||trT)
Muito obrigado por qualquer informacao e pelo tempo gasto em ler esse email... sei que é grande....
-------------- Próxima Parte ----------
Um anexo em HTML foi limpo...
URL: http://listas.asteriskbrasil.org/pipermail/asteriskbrasil/attachments/20080125/a561a9c8/attachment-0001.htm
More information about the AsteriskBrasil
mailing list