[AsteriskBrasil] digivoice quase funcionando..

[alcaponefelippe em bol.com.br]

Consegui eliminar o problema do kernel panic e lost interrupts..
Agora o asterisk esta levantado e com a placa. (smile)
Mas so não consigo fazer chamadas por ela..
Segue tudo que tenho para alguem dar umas dicas!
Obrigado.


Qndo carrega o asterisk
[Mar 23 12:06:48] NOTICE[3491]: chan_dgv.c:10200 setup_dgv: Configurations for Dgv Channel:
[Mar 23 12:06:48] NOTICE[3491]: chan_dgv.c:10201 setup_dgv: default detectiontype  = 1
[Mar 23 12:06:48] NOTICE[3491]: chan_dgv.c:10213 setup_dgv: default_call_progress = cp_default.cfg
[Mar 23 12:06:48] NOTICE[3491]: chan_dgv.c:10223 setup_dgv: audio capabilities = 4e
[Mar 23 12:06:48] NOTICE[3491]: chan_dgv.c:10466 setup_dgv: Loading ports........................
[Mar 23 12:06:48] NOTICE[3491]: chan_dgv.c:10488 setup_dgv: Waiting synchronization....................
[Mar 23 12:06:48] NOTICE[3491]: chan_dgv.c:10492 setup_dgv: SetAlarmMode to ALARM_AUTOMATIC_NOTIFY
[Mar 23 12:06:48] NOTICE[3491]: chan_dgv.c:4591 set_port_config: port=1 id= context=default - cat=1 max_rx=4 txgain=0 rxgain=0 echocan=yes
[Mar 23 12:06:48] ERROR[3491]: chan_dgv.c:4755 set_port_config: dg_IdleStart for port 1 - cod 503
[Mar 23 12:06:48] NOTICE[3491]: chan_dgv.c:4591 set_port_config: port=2 id= context=default - cat=1 max_rx=4 txgain=0 rxgain=0 echocan=yes
[Mar 23 12:06:48] ERROR[3491]: chan_dgv.c:4755 set_port_config: dg_IdleStart for port 2 - cod 503
[Mar 23 12:06:48] NOTICE[3491]: chan_dgv.c:4591 set_port_config: port=3 id= context=default - cat=1 max_rx=4 txgain=0 rxgain=0 echocan=yes
[Mar 23 12:06:48] ERROR[3491]: chan_dgv.c:4755 set_port_config: dg_IdleStart for port 3 - cod 503
[Mar 23 12:06:48] NOTICE[3491]: chan_dgv.c:4591 set_port_config: port=4 id= context=default - cat=1 max_rx=4 txgain=0 rxgain=0 echocan=yes
  == Parsing '/etc/asterisk/features.conf': Found
[Mar 23 12:06:48] WARNING[3491]: chan_dgv.c:10877 setup_dgv: Dgv Channel: FXS transfer command not found!!!
[Mar 23 12:06:48] NOTICE[3491]: chan_dgv.c:10887 setup_dgv: Requesting alarm notifications...


Na cli qndo efetuo uma chamada para sair por ela:
Executing [37213438 em default:1] Dial("SIP/23-081eb740", "Dgv/g137213438|40|TtrwW") in new stack
[Mar 23 12:11:28] NOTICE[3635]: chan_dgv.c:8342 dgv_request: Asked to get a channel Dgv/g137213438 using format AST_FORMAT_ULAW:ffWaveULaw
[Mar 23 12:11:28] NOTICE[3635]: chan_dgv.c:8358 dgv_request: Group g137213438
    -- Called g137213438
[Mar 23 12:11:31] NOTICE[3635]: chan_dgv.c:9270 dgv_hangup: Calling dg_HangUp on port 1
  == Everyone is busy/congested at this time (1:0/0/1)
    -- Executing [37213438 em default:2] Hangup("SIP/23-081eb740", "") in new stack  == Spawn extension (default, 37213438, 2) exited non-zero on 'SIP/23-081eb740'

No extensions.conf
exten => _372xxxxx,1,Dial(Dgv/g1/${EXTEN},40,TtrwW)
exten => _372xxxxx,2,Hangup

No sip.conf
[22]
type=friend
secret=22
context=default
callerid="teste" <22>
dtmfmode=rfc2833
host=dynamic
nat=yes
disallow=all
allow=ulaw
allow=alaw
allow=g729
canreinvite=no
callgroup=1
pickupgroup=1

No digivoice.conf
[general]
allow_slinear=1
allow_ulaw=1
allow_alaw=1
allow_gsm=1

consolelanguage=br

[allportsconfig]

default_callprogress=cp_default.cfg
detectiontype = 1
dialtype = 1
afterdialpause=1000

ringbacktone1 = tone1
ringbacktone2 = tone1
ringbacktimes = 1000,4000,1000,4000

busytone1 = tone1
busytone2 = tone1
busytimes = 250,250,250,250


[groups]
group = 1
ports => 1
group = 2
ports => 2
group = 3
ports => 3
group = 4
ports => 4

[port_config]
context=default
tx_gain = 0
rx_gain = 0
echocan=4
echotraining=400
signalling=fxo
gen_dtmf=1
gen_ringback=1
gen_busy=1
dtmf_to_asterisk=2
callprogress=cp_default.cfg
language=pt_BR
silence_threshold=-24
dialtone_timeout=3000
wait_dialtone=1
relaxdtmf=1
ports => 1-4