[AsteriskBrasil] problema com redfone e E1 embratel

Jorge Churio jchurio em red-fone.com
Segunda Agosto 29 10:28:33 BRT 2011


Alejandro,


O redfone esta configurado com CAS (R2) e nao como PRI (CCS) por isso esta
recevendo monte de mensagems ISDN enváilidos

Olhie no arquivo redfone.conf 

Na definição dos spans tem que têr ccs  e não cas

Mesmo no arquivo systems confira que é configurado como PRI

Me contata se precisar suporte direto de nos (sou funcionário da Redfone)

Existe, também, um script de configuração,pode pegar ele de:
http://support.red-fone.com/downloads/tools/setup-redfone.sh

Fico a disposição




-----Original Message-----
From: asteriskbrasil-bounces em listas.asteriskbrasil.org
[mailto:asteriskbrasil-bounces em listas.asteriskbrasil.org] On Behalf Of
Alejandro Flores
Sent: Monday, August 29, 2011 10:20 AM
To: asteriskbrasil
Subject: [AsteriskBrasil] problema com redfone e E1 embratel

Amigos,

Configurei um redfone + link E1 da embratel (ISDN), porém não consigo
efetuar chamadas. O pessoal da Embratel ja testou e efetuou ligações pelo
link, indicando que o link está ativando, roteando, etc...

O E1 levanta, status OK:

ipbx*CLI> pri show spans
PRI span 1/0: Up, Active

ipbx*CLI> dahdi show status
Description                              Alarms  IRQ    bpviol CRC4
Fra Codi Options  LBO
Dynamic 'ethmf' span at 'eth0/00:50:c2:  OK      0      0      0
CAS Unk           0 db (CSU)/0-133 feet (DSX-1)

Se eu ativar o debug:

ipbx*CLI> pri set debug on span 1
Enabled debugging on span 1

A seguinte mensagem não para de subir na tela:

PRI Span: 1 TEI=0 Got SABME from network peer.
PRI Span: 1 TEI=0 Sending UA
PRI Span: 1 TEI=0 MDL-ERROR (F): SABME in state 7(Multi-frame established)
PRI Span: 1 TEI=0 Got SABME from network peer.
PRI Span: 1 TEI=0 Sending UA
PRI Span: 1 TEI=0 MDL-ERROR (F): SABME in state 7(Multi-frame established)
PRI Span: 1 TEI=0 Got SABME from network peer.
PRI Span: 1 TEI=0 Sending UA
PRI Span: 1 TEI=0 MDL-ERROR (F): SABME in state 7(Multi-frame established)
PRI Span: 1 TEI=0 Got SABME from network peer.
PRI Span: 1 TEI=0 Sending UA

E fica se repetindo o tempo todo.

Ativando o intense debug:

ipbx*CLI> pri intense debug span 1
Enabled debugging on span 1
PRI Span: 1
PRI Span: 1 < TEI: 0 State 7(Multi-frame established) PRI Span: 1 < V(A)=0,
V(S)=0, V(R)=0 PRI Span: 1 < K=7, RC=1, l3_initiated=1, reject_except=0,
ack_pend=0 PRI Span: 1 < T200_id=0, N200=3, T203_id=57344 PRI Span: 1 < [ 02
01 7f ] PRI Span: 1 < Unnumbered frame:
PRI Span: 1 < SAPI: 00  C/R: 1 EA: 0
PRI Span: 1 <  TEI: 000        EA: 1
PRI Span: 1 <   M3: 3   P/F: 1 M2: 3 11: 3  [ SABME (set asynchronous
balanced mode extended) ]
PRI Span: 1 < 0 bytes of data
PRI Span: 1 TEI=0 Got SABME from network peer.
PRI Span: 1 TEI=0 Sending UA
PRI Span: 1
PRI Span: 1 > TEI: 0 State 7(Multi-frame established) PRI Span: 1 > V(A)=0,
V(S)=0, V(R)=0 PRI Span: 1 > K=7, RC=1, l3_initiated=1, reject_except=0,
ack_pend=0 PRI Span: 1 > T200_id=0, N200=3, T203_id=57344 PRI Span: 1 > [ 02
01 73 ] PRI Span: 1 > Unnumbered frame:
PRI Span: 1 > SAPI: 00  C/R: 1 EA: 0
PRI Span: 1 >  TEI: 000        EA: 1
PRI Span: 1 >   M3: 3   P/F: 1 M2: 0 11: 3  [ UA (unnumbered
acknowledgement) ]
PRI Span: 1 > 0 bytes of data
PRI Span: 1 TEI=0 MDL-ERROR (F): SABME in state 7(Multi-frame established)
PRI Span: 1 -- T200 requested to stop when not started PRI Span: 1 T203
requested to start without stopping first PRI Span: 1 -- Starting T203 timer
PRI Span: 1 Done handling message for SAPI/TEI=0/0

Qualquer ajuda é bem vinda :-)

Abraço!
-- 

Alejandro Flores
http://www.triforsec.com.br/
_______________________________________________
KHOMP: qualidade em placas de E1, GSM, FXS e FXO para Asterisk. 
- Hardware com alta disponibilidade de recursos e qualidade KHOMP
- Suporte técnico local qualificado e gratuito Conheça a linha completa de
produtos KHOMP em www.khomp.com.br
_______________________________________________
DIGIVOICE: Lider no mercado de placas para Asterisk Único fabricante com
Centro de Treinamento especializado.
LANÇAMENTO: Channel Bank TDMoE, até 64 canais FXS / FXO. 
www.digivoice.com.br ou (11)3016-5200.
________
LANÇAMENTO SHOPVOIP! Gateway Xibelis Lyric VoIP com 2,4 e 6 canais GSM.
Arquitetura Escalável, Balanceamento de Carga, Portabilidade Numérica.
Confira em http://www.yx.cl/landing/brasil/lyric_voip_asterisk.org
Mais informações: www.shopvoip.com.br ou 0800-6021244
______________________________________________
Para remover seu email desta lista, basta enviar um email em branco para
asteriskbrasil-unsubscribe em listas.asteriskbrasil.org



Mais detalhes sobre a lista de discussão AsteriskBrasil