[AsteriskBrasil] Motorola Wildcard X100P x Asterisk

[Wilian Silva]

Senhores,

Estou com o seguinte erro no CLI do Asterisk:

Executing [XXXXXXXX em default:1] Dial("SIP/1-099bfae8", "ZAP/1/XXXXXXXX") in new stack [Feb  2 22:09:19] WARNING[2792]: channel.c:3470 ast_request: No channel type registered for 'ZAP'
[Feb  2 22:09:19] WARNING[2792]: app_dial.c:1450 dial_exec_full: Unable to create channel of type 'ZAP' (cause 66 - Channel not implemented)
  == Everyone is busy/congested at this time (1:0/0/1)
    -- Executing [XXXXXXXX em default:2] Hangup("SIP/1-099bfae8", "") in new stack
  == Spawn extension (default, XXXXXXXX, 2) exited non-zero on 'SIP/1-099bfae8'

Meu extensions.conf esta assim:
[general]
LINHA01=ZAP/1 ; modulo DAHDI canal 1

[globals]
LINHA01=ZAP/1 ; modulo DAHDI canal 1
[default]
LINHA01=ZAP/1 ; modulo DAHDI canal 1

;RECEPTIVAS
exten => s,1,Dial(SIP/1,10,Tt)
exten => s,n,Hangup

;lIGACOES INTERNAS
exten => _X,1,Dial(SIP/${EXTEN})
exten => _X,n,Hangup
;LIGACOES EXTERNAS LOCAIS MOVEL E FIXO
exten => _XXXXXXXX,1,Dial(${LINHA01}/${EXTEN})
exten => _XXXXXXXX,n,Hangup

/etc/zaptel.conf
fxsks=1
loadzone=us
defaultzone=us

/etc/asterisk/zapata.conf
signalling=fxs_ks
language=en
rxgain=0.0
txgain=0.0
echocancelwhenbridged=yes
echocancel=yes
context=default
channel => 1

/etc/asterisk/sip.conf
[1]
 type= friend
callerid=1
username=1
secret=1234
host=dynamic
context=default 

lspci:
00:09.0 Communication controller: Motorola Wildcard X100P


zttool:

Alarms          Span                                            
 OK              Wildcard X100P Board 1


cat /proc/interupts:

 0:         68   IO-APIC-edge      timer
  1:          2   IO-APIC-edge      i8042
  8:          2   IO-APIC-edge      rtc0
  9:          1   IO-APIC-fasteoi   acpi
 12:          4   IO-APIC-edge      i8042
 14:      10784   IO-APIC-edge      ide0
 15:      13352   IO-APIC-edge      ide1
 17:    1526615   IO-APIC-fasteoi   wcfxo
 19:       3097   IO-APIC-fasteoi   eth0
 20:        108   IO-APIC-fasteoi   ohci_hcd:usb1
 21:          0   IO-APIC-fasteoi   ohci_hcd:usb2
 22:          0   IO-APIC-fasteoi   ohci_hcd:usb3
 23:          2   IO-APIC-fasteoi   ehci_hcd:usb4
NMI:          0   Non-maskable interrupts
LOC:      42834   Local timer interrupts
RES:          0   Rescheduling interrupts
CAL:          0   function call interrupts
TLB:          0   TLB shootdowns
TRM:          0   Thermal event interrupts
SPU:          0   Spurious interrupts
ERR:          0
MIS:          0

/etc/asterisk# ztcfg -vvvv

Zaptel Version: 1.4.12
Echo Canceller: MG2
Configuration
======================


Channel map:

Channel 01: FXS Kewlstart (Default) (Slaves: 01)

1 channels to configure.

Alguem tem alguma dica?





-- 
Esta mensagem foi verificada pelo sistema de antivírus e
 acredita-se estar livre de perigo.