[AsteriskBrasil] Placa TDM410 - FXO nao funciona

[Emerson Vier - GOOGLE]

Pessoal to rodando o asterisk cfme abaixo, estou  2 portas FXS estão OK,
porem as 2 FXO não cosigo fazer funcionar :

FreePBX Version          = 2.10.1.1
Running Asterisk Version = 1.8.13.0
Asterisk Source Version  = 1.8.13.0
Dahdi Source Version     = 2.6.1+2.6.1
Libpri Source Version    = 1.4.12

Instalei uma placa TDM410

root em pbx:~ $ dmesg | grep -i tdm
wctdm24xxp 0000:02:08.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) ->
IRQ 16
wctdm24xxp 0000:02:08.0: Port 1: Installed -- AUTO FXO (FCC mode)
wctdm24xxp 0000:02:08.0: Port 2: Installed -- AUTO FXO (FCC mode)
wctdm24xxp 0000:02:08.0: Port 3: Installed -- AUTO FXS/DPO
wctdm24xxp 0000:02:08.0: Port 4: Installed -- AUTO FXS/DPO
wctdm24xxp 0000:02:08.0: Found a Wildcard TDM: Wildcard TDM410P (0 BRI
spans, 4 analog channels)


pbx*CLI> dahdi show channels
   Chan Extension  Context         Language   MOH Interpret        Blocked
   State
 pseudo            default                    default
  In Service
      3            from-internal              default
  In Service
      4            from-internal              default
  In Service


Atenciosamente/Best Regards,

EMERSON VIER
emersonvier em gmail.com
-------------- Próxima Parte ----------
Um anexo em HTML foi limpo...
URL: http://listas.asteriskbrasil.org/pipermail/asteriskbrasil/attachments/20120821/12658d11/attachment.htm