[AsteriskBrasil] Elastix + Dongle 3g
Everton Carneiro
everton em visaotecnologia.com
Segunda Abril 15 16:37:00 BRT 2013
tenta comentando:
;audio=/dev/ttyUSB2 ; tty port for audio connection; no
default value
;data=/dev/ttyUSB3 ; tty port for AT commands; no
default value
e coloca somente o imei
2013/4/15 Otavio Asterisk <otavioasterisk em gmail.com>
> praticamente default, alterei apenas o número da usb, e o meu imei e imsi.
>
> [general]
>
> interval=15 ; Number of seconds between trying to
> connect to devices
>
> ;------------------------------ JITTER BUFFER CONFIGURATION
> --------------------------
> ;jbenable = yes ; Enables the use of a jitterbuffer on the
> receiving side of a
> ; Dongle channel. Defaults to "no". An
> enabled jitterbuffer will
> ; be used only if the sending side can
> create and the receiving
> ; side can not accept jitter. The Dongle
> channel can't accept jitter,
> ; thus an enabled jitterbuffer on the
> receive Dongle side will always
> ; be used if the sending side can create
> jitter.
>
> ;jbforce = no ; Forces the use of a jitterbuffer on the
> receive side of a Dongle
> ; channel. Defaults to "no".
>
> ;jbmaxsize = 200 ; Max length of the jitterbuffer in
> milliseconds.
>
> ;jbresyncthreshold = 1000 ; Jump in the frame timestamps over which
> the jitterbuffer is
> ; resynchronized. Useful to improve the
> quality of the voice, with
> ; big jumps in/broken timestamps, usually
> sent from exotic devices
> ; and programs. Defaults to 1000.
>
> ;jbimpl = fixed ; Jitterbuffer implementation, used on the
> receiving side of a Dongle
> ; channel. Two implementations are
> currently available - "fixed"
> ; (with size always equals to jbmaxsize)
> and "adaptive" (with
> ; variable size, actually the new jb of
> IAX2). Defaults to fixed.
>
> ;jbtargetextra = 40 ; This option only affects the jb when
> 'jbimpl = adaptive' is set.
> ; The option represents the number of
> milliseconds by which the new jitter buffer
> ; will pad its size. the default is 40, so
> without modification, the new
> ; jitter buffer will set its size to the
> jitter value plus 40 milliseconds.
> ; increasing this value may help if your
> network normally has low jitter,
> ; but occasionally has spikes.
>
> ;jblog = no ; Enables jitterbuffer frame logging.
> Defaults to "no".
>
> ;-----------------------------------------------------------------------------------
>
> [defaults]
> ; now you can set here any not required device settings as template
> ; sure you can overwrite in any [device] section this default values
>
> context=from-pstn ; context for incoming calls
> group=0 ; calling group
> rxgain=0 ; increase the incoming volume; may be
> negative
> txgain=0 ; increase the outgoint volume; may be
> negative
> autodeletesms=yes ; auto delete incoming sms
> resetdongle=yes ; reset dongle during initialization with
> ATZ command
> u2diag=-1 ; set ^U2DIAG parameter on device (0 =
> disable everything except modem function) ; -1 not use ^U2DIAG command
> usecallingpres=yes ; use the caller ID presentation or not
> callingpres=allowed_passed_screen ; set caller ID presentation by
> default use default network settings
> disablesms=no ; disable of SMS reading from device when
> received
> ; chan_dongle has currently a bug with
> SMS reception. When a SMS gets in during a
> ; call chan_dongle might crash. Enable
> this option to disable sms reception.
> ; default = no
>
> language=en ; set channel default language
> smsaspdu=yes ; if 'yes' send SMS in PDU mode, feature
> implementation incomplete and we strongly recommend say 'yes'
> mindtmfgap=45 ; minimal interval from end of previews
> DTMF from begining of next in ms
> mindtmfduration=80 ; minimal DTMF tone duration in ms
> mindtmfinterval=200 ; minimal interval between ends of DTMF of
> same digits in ms
>
> callwaiting=auto ; if 'yes' allow incoming calls waiting;
> by default use network settings
> ; if 'no' waiting calls just ignored
> disable=no ; OBSOLETED by initstate: if 'yes' no load
> this device and just ignore this section
>
> initstate=start ; specified initial state of device, must
> be one of 'stop' 'start' 'remote'
> ; 'remove' same as 'disable=yes'
>
> exten=+1234567890 ; exten for start incoming calls, only in
> case of Subscriber Number not available!, also set to CALLERID(ndid)
>
> dtmf=relax ; control of incoming DTMF detection,
> possible values:
> ; off - off DTMF tones detection,
> voice data passed to asterisk unaltered
> ; use this value for gateways
> or if not use DTMF for AVR or inside dialplan
> ; inband - do DTMF tones detection
> ; relax - like inband but with
> relaxdtmf option
> ; default is 'relax' by compatibility
> reason
>
> ; dongle required settings
> [dongle0]
> audio=/dev/ttyUSB2 ; tty port for audio connection; no
> default value
> data=/dev/ttyUSB3 ; tty port for AT commands; no
> default value
>
> ; or you can omit both audio and data together and use
> imei=123456789012345 and/or imsi=123456789012345
> ; imei and imsi must contain exactly 15 digits !
> ; imei/imsi discovery is available on Linux only
> imei=XXXXXXXXXXXXXXX
> imsi=XXXXXXXXXXXXXXX
>
> ; if audio and data set together with imei and/or imsi audio and data has
> precedence
> ; you can use both imei and imsi together in this case exact match by
> imei and imsi required
>
>
>
>
> Em 15 de abril de 2013 15:41, Everton Carneiro <
> everton em visaotecnologia.com> escreveu:
>
> como esta o aquivo dongle.conf?
>>
>>
>> Em 15 de abril de 2013 15:36, Otavio Asterisk <otavioasterisk em gmail.com>escreveu:
>>
>>> Lista, boa tarde.
>>> Consegui subir o modem, consigo realizar e receber ligações, no entanto,
>>> qnd ligo através do modem, a pessoa q me atende não ouve nada, apenas um
>>> chiado e alto e um pouco da minha voz metalizada. O mesmo ocorre qnd ligo
>>> para o chip q está no modem: ouço a ura do meu pabx toda metalizada e com
>>> muito chiado de fundo.
>>> Alguém já passou por isso ou tem alguma dica?
>>> Abraço a todos!
>>>
>>> --
>>> Otávio
>>>
>>> _______________________________________________
>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>> www.Khomp.com.
>>> _______________________________________________
>>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank
>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>>> Centro Treinamento - Curso de PABX IP - Asterisk - Site
>>> www.digivoice.com.br
>>> _______________________________________________
>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>> _______________________________________________
>>> Para remover seu email desta lista, basta enviar um email em branco para
>>> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>
>>
>>
>>
>> --
>> *Everton Carneiro .:*
>> *Visão Tecnologia
>> *
>> *Fortaleza-CE 85-3044 8888 / 3044-8844
>> *
>> *Cel: Tim 85-9665 0888
>> *
>>
>> Preserve o verde, antes de imprimir veja se realmente é necessário.
>>
>> _______________________________________________
>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>> www.Khomp.com.
>> _______________________________________________
>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank
>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>> Centro Treinamento - Curso de PABX IP - Asterisk - Site
>> www.digivoice.com.br
>> _______________________________________________
>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>> _______________________________________________
>> Para remover seu email desta lista, basta enviar um email em branco para
>> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>
>
>
>
> --
> Otávio
>
> _______________________________________________
> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
> Intercomunicadores para acesso remoto via rede IP. Conheça em
> www.Khomp.com.
> _______________________________________________
> DIGIVOICE Fabricante de Placas de Voz e Channel Bank
> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
> Centro Treinamento - Curso de PABX IP - Asterisk - Site
> www.digivoice.com.br
> _______________________________________________
> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
> _______________________________________________
> Para remover seu email desta lista, basta enviar um email em branco para
> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>
--
*Everton Carneiro .:*
*Visão Tecnologia
*
*Fortaleza-CE 85-3044 8888 / 3044-8844
*
*Cel: Tim 85-9665 0888
*
Preserve o verde, antes de imprimir veja se realmente é necessário.
-------------- Próxima Parte ----------
Um anexo em HTML foi limpo...
URL: http://listas.asteriskbrasil.org/pipermail/asteriskbrasil/attachments/20130415/baf9824f/attachment-0001.htm
Mais detalhes sobre a lista de discussão AsteriskBrasil