[AsteriskBrasil] Digium TE220B E1 + R2 telefonica = Invalid CAS

Sábado Fevereiro 2 00:37:46 BRST 2013

Olá,

Você fez a seguinte configuração no seu system.conf

span=1,*1*,0,cas,hdb3

Com esse 1 marcado diz que você gera o clock de sincronia, em teoria, não
seria a telefonica que te passa o clock?

--
Gian Nicodemus
Analista de sistemas
giannicodemus em gmail.com

2013/2/1 Cassio Simões <thcassio em gmail.com>

> Olá povo,
>
> Estou penando pra configurar uma E1 com R2 da telefônica, recebo este
> aviso:
>
> [Jan 28 19:01:21] DEBUG[4331] chan_dahdi.c: Chan 14 - CAS Tx >> [IDLE]
> 0x08
> [Jan 28 19:01:21] ERROR[4332] chan_dahdi.c: MFC/R2 protocol error on chan
> 28: Invalid CAS
> [Jan 28 19:01:21] DEBUG[4331] chan_dahdi.c: Chan 14 - CAS Raw Tx >> 0x09
> [Jan 28 19:01:21] ERROR[4331] chan_dahdi.c: MFC/R2 protocol error on chan
> 14: Invalid CAS
> [Jan 28 19:01:21] DEBUG[4331] chan_dahdi.c: Chan 15 - Bits changed from
> 0x0C to 0x04
> [Jan 28 19:01:21] DEBUG[4331] chan_dahdi.c: Chan 15 - CAS Rx << [0x04]
> 0x04
> [Jan 28 19:01:21] ERROR[4331] chan_dahdi.c: Chan 15 - Protocol error.
> Reason = Invalid CAS, R2 State = Idle, MF state = MF Engine Off, MF Group
> = No Group,CAS = 0x04
> DNIS = , ANI = , MF = 0x20
> [Jan 28 19:01:21] DEBUG[4332] chan_dahdi.c: Chan 29 - Bits changed from
> 0x0C to 0x04
> [Jan 28 19:01:21] DEBUG[4332] chan_dahdi.c: Chan 29 - CAS Rx << [0x04]
> 0x04
> [Jan 28 19:01:21] DEBUG[4331] chan_dahdi.c: Chan 15 - CAS Tx >> [IDLE]
> 0x08
> [Jan 28 19:01:21] ERROR[4332] chan_dahdi.c: Chan 29 - Protocol error.
> Reason = Invalid CAS, R2 State = Idle, MF state = MF Engine Off, MF Group
> = No Group,CAS = 0x04
> DNIS = , ANI = , MF = 0x20
> [Jan 28 19:01:21] DEBUG[4332] chan_dahdi.c: Chan 29 - CAS Tx >> [IDLE]
> 0x08
> [Jan 28 19:01:21] DEBUG[4331] chan_dahdi.c: Chan 15 - CAS Raw Tx >> 0x09
> [Jan 28 19:01:21] ERROR[4331] chan_dahdi.c: MFC/R2 protocol error on chan
> 15: Invalid CAS
> [Jan 28 19:01:21] DEBUG[4332] chan_dahdi.c: Chan 29 - CAS Raw Tx >> 0x09
> [Jan 28 19:01:21] ERROR[4332] chan_dahdi.c: MFC/R2 protocol error on chan
> 29: Invalid CAS
> [Jan 28 19:01:21] DEBUG[4332] chan_dahdi.c: Chan 30 - Bits changed from
> 0x0C to 0x04
> [Jan 28 19:01:21] DEBUG[4332] chan_dahdi.c: Chan 30 - CAS Rx << [0x04]
> 0x04
> [Jan 28 19:01:21] ERROR[4332] chan_dahdi.c: Chan 30 - Protocol error.
> Reason = Invalid CAS, R2 State = Idle, MF state = MF Engine Off, MF Group
> = No Group,CAS = 0x04
> DNIS = , ANI = , MF = 0x20
> [Jan 28 19:01:21] DEBUG[4332] chan_dahdi.c: Chan 30 - CAS Tx >
>
> system.conf:
> # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
> span=1,1,0,cas,hdb3
> echocanceller=oslec,1-15,17-31
> #termtype: te
> cas=1-15:1101
> #dchan=16
> cas=17-31:1101
>
> # Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
> # span=2,2,0,ccs,hdb3,crc4
> # echocanceller=oslec,32-46,48-62
> # termtype: te
> # bchan=32-46,48-62
> # dchan=47
>
> # Span 3: WCTDM/0 "Wildcard AEX800 Board 1"
> fxsks=63
> echocanceller=oslec,63
> fxsks=64
> echocanceller=oslec,64
> fxsks=65
> echocanceller=oslec,65
> fxsks=66
> echocanceller=oslec,66
> fxoks=67
> echocanceller=oslec,67
> fxoks=68
> echocanceller=oslec,68
> fxoks=69
> echocanceller=oslec,69
> fxoks=70
> echocanceller=oslec,70
>
> # Global data
>
> loadzone = br
> defaultzone = br
>
> dahdi-channels.conf:
>
> ; Autogenerated by /usr/sbin/dahdi_genconf on Wed Mar 14 17:09:07 2012
> ; If you edit this file and execute /usr/sbin/dahdi_genconf again,
> ; your manual changes will be LOST.
> ; Dahdi Channels Configurations (chan_dahdi.conf)
> ;
> ; This is not intended to be a complete chan_dahdi.conf. Rather, it is
> intended
> ; to be #include-d by /etc/chan_dahdi.conf that will include the global
> settings
> ;
>
> ; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER)
> group=0,11
> context=from-pstn
> ; switchtype = euroisdn
> signalling = mfcr2
> channel => 1-15,17-31
> context = default
> group = 63
>
> ; Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
> ; group=0,12
> ; context=from-pstn
> ; switchtype = euroisdn
> ; signalling = pri_cpe
> ; channel => 32-46,48-62
> ; context = default
> ; group = 63
>
> ; Span 3: WCTDM/0 "Wildcard AEX800 Board 1"
> ;;; line="63 WCTDM/0/0 FXSKS"
> signalling=fxs_ks
> callerid=asreceived
> group=0
> context=from-pstn
> channel => 63
> callerid=
> group=
> context=default
>
> ;;; line="64 WCTDM/0/1 FXSKS"
> signalling=fxs_ks
> callerid=asreceived
> group=0
> context=from-pstn
> channel => 64
> callerid=
> group=
> context=default
>
> ;;; line="65 WCTDM/0/2 FXSKS"
> signalling=fxs_ks
> callerid=asreceived
> group=0
> context=from-pstn
> channel => 65
> callerid=
> group=
> context=default
>
> ;;; line="66 WCTDM/0/3 FXSKS"
> signalling=fxs_ks
> callerid=asreceived
> group=0
> context=from-pstn
> channel => 66
> callerid=
> group=
> context=default
>
> ;;; line="67 WCTDM/0/4 FXOKS"
> signalling=fxo_ks
> callerid="Channel 67" <4067>
> mailbox=4067
> group=5
> context=from-internal
> channel => 67
> callerid=
> mailbox=
> group=
> context=default
>
> ;;; line="68 WCTDM/0/5 FXOKS"
> signalling=fxo_ks
> callerid="Channel 68" <4068>
> mailbox=4068
> group=5
> context=from-internal
> channel => 68
> callerid=
> mailbox=
> group=
> context=default
>
> ;;; line="69 WCTDM/0/6 FXOKS"
> signalling=fxo_ks
> callerid="Channel 69" <4069>
> mailbox=4069
> group=5
> context=from-internal
> channel => 69
> callerid=
> mailbox=
> group=
> context=default
>
> ;;; line="70 WCTDM/0/7 FXOKS"
> signalling=fxo_ks
> callerid="Channel 70" <4070>
> mailbox=4070
> group=5
> context=from-internal
> channel => 70
> callerid=
> mailbox=
> group=
> context=default
>
> chan_dahdi.conf
>
> trunkgroups]
>
> [channels]
> usecallerid=yes
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> tx=0.0
> rx=-1.0
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> signalling=mfcr2
> mfcr2_variant=br
> mfcr2_get_ani_first=no
> mfcr2_max_ani=20
> mfcr2_max_dnis=20
> mfcr2_category=national_subscriber
> mfcr2_logdir=telefonica
> mfcr2_allow_collect_calls=no
> mfcr2_double_answer=no
> mfcr2_charge_calls=yes
> mfcr2_call_files=yes
> mfcr2_logging=all
> mfcr2_metering_pulse_timeout=3000
> mfcr2_forced_release=yes
> immediate=no
> language= pt_BR
> #include dahdi-channels.conf
> #include chan_dahdi_additional.conf
>
> Estou usando elastix e a versão do asterisk é 1.8.20.0
>
>
> Já tentei de tudo, trocar cabo, IRQ na BIOS, e nada..
>
> Alguém já passou por isso e conseguiu resolver?
>
> Abraço a todos.
>
>
> _______________________________________________
> EBS MODULAR: 3 slots para combinação entre E1, GSM, FXS ou FXO;
> Linha de PORTEIROS IP, abrem até 2 dispositivos com acesso IP remoto;
> Conheça esses e outros LANÇAMENTOS KHOMP em www.Khomp.com
> _______________________________________________
> DIGIVOICE  Fabricante de Placas de Voz e Channel Bank
> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
> Centro Treinamento - Curso de PABX IP -  Asterisk  - Site
> www.digivoice.com.br
> _______________________________________________
> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
> _______________________________________________
> Para remover seu email desta lista, basta enviar um email em branco para
> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>
-------------- Próxima Parte ----------
Um anexo em HTML foi limpo...
URL: http://listas.asteriskbrasil.org/pipermail/asteriskbrasil/attachments/20130202/a689ee0f/attachment.htm 