[AsteriskBrasil] DAHDI MFCR2 - Embratel

[Roger Pitigliani]

Derruba sempre?

Checa os baloons e cabos/conectores, por mais que não pareça, pode ser.

Posta o resultado do comando:
CLI> dahdi show status


Att,

2013/3/26 deny.santos em gmail.com <deny.santos em gmail.com>

> Bom dia amigos gostaria de uma ajuda de todos, estou configurando um link
> R2 da embratel porem o mesmo quando recebi chamadas esta gerando este erro
> no dahdi e derrubando a ligação , alguma ideia ?
>
> Obrigado
>
> New MFC/R2 call detected on chan 1.
> Chan 2 - Handling persistent pattern 0x00
> New MFC/R2 call detected on chan 2.
> MFC/R2 call offered on chan 1. ANI = , DNIS = 1, Category = *Unknown*
> MFC/R2 call has been accepted on backward channel 1
>    -- Executing [1 em from-trunk:1] Set("DAHDI/1-1", "__FROM_DID=1") in new
> stack
>    -- Executing [1 em from-trunk:2] NoOp("DAHDI/1-1", "Received an unknown
> call with DID set to 1") in new stack
>    -- Executing [1 em from-trunk:3] Goto("DAHDI/1-1", "s,a2") in new stack
>    -- Goto (from-trunk,s,2)
>    -- Executing [s em from-trunk:2] Answer("DAHDI/1-1", "") in new stack
>    -- Executing [s em from-trunk:3] Wait("DAHDI/1-1", "2") in new stack
> Chan 2 - Handling persistent pattern 0x08
> Chan 2 - Far end disconnected. Reason: Normal Clearing
> MFC/R2 call disconnected on channel 2
> MFC/R2 call end on channel 2
> Chan 1 - Handling persistent pattern 0x08
> Chan 1 - Far end disconnected. Reason: Normal Clearing
> MFC/R2 call disconnected on channel 1
>  == Spawn extension (from-trunk, s, 3) exited non-zero on 'DAHDI/1-1'
>    -- Executing [h em from-trunk:1] Macro("DAHDI/1-1", "hangupcall,") in new
> stack
>    -- Executing [s em macro-hangupcall:1] GotoIf("DAHDI/1-1", "1?theend") in
> new stack
>    -- Goto (macro-hangupcall,s,3)
>    -- Executing [s em macro-hangupcall:3] ExecIf("DAHDI/1-1",
> "0?Set(CDR(recordingfile)=)") in new stack
>    -- Executing [s em macro-hangupcall:4] Hangup("DAHDI/1-1", "") in new
> stack
>  == Spawn extension (macro-hangupcall, s, 4) exited non-zero on
> 'DAHDI/1-1' in macro 'hangupcall'
>  == Spawn extension (from-trunk, h, 1) exited non-zero on 'DAHDI/1-1'
> MFC/R2 call end on channel 1
>    -- Hungup 'DAHDI/1-1'
>
>
>
>
> MFC/R2 call offered on chan 2. ANI = , DNIS = 1, Category = *Unknown*
> [2013-03-26 10:43:50] WARNING[5264]: chan_dahdi.c:4127 dahdi_r2_write_log:
> Chan 1 - MF back cycle timed out!
> [2013-03-26 10:43:50] ERROR[5264]: chan_dahdi.c:4130 dahdi_r2_write_log:
> Chan 1 - Protocol error. Reason = Multi Frequency Cycle Timeout, R2 State =
> Seize ACK Transmitted, MF state = Accepted Call Transmitted, MF Group =
> Backward Group B, CAS = 0x00
> DNIS = 1, ANI = , MF = 0x31
> [2013-03-26 10:43:50] ERROR[5264]: chan_dahdi.c:3915
> dahdi_r2_on_protocol_error: MFC/R2 protocol error on chan 1: Multi
> Frequency Cycle Timeout
> Chan 1 - Handling persistent pattern 0x08
> [2013-03-26 10:43:51] NOTICE[5264]: chan_dahdi.c:4161
> dahdi_r2_on_line_idle: Far end unblocked on chan 1
> [2013-03-26 10:43:52] WARNING[5264]: chan_dahdi.c:4127 dahdi_r2_write_log:
> Chan 2 - MF back cycle timed out!
> [2013-03-26 10:43:52] ERROR[5264]: chan_dahdi.c:4130 dahdi_r2_write_log:
> Chan 2 - Protocol error. Reason = Multi Frequency Cycle Timeout, R2 State =
> Seize ACK Transmitted, MF state = Accepted Call Transmitted, MF Group =
> Backward Group B, CAS = 0x00
> DNIS = 1, ANI = , MF = 0x31
> [2013-03-26 10:43:52] ERROR[5264]: chan_dahdi.c:3915
> dahdi_r2_on_protocol_error: MFC/R2 protocol error on chan 2: Multi
> Frequency Cycle Timeout
> Chan 2 - Handling persistent pattern 0x08
> [2013-03-26 10:43:52] NOTICE[5264]: chan_dahdi.c:4161
> dahdi_r2_on_line_idle: Far end unblocked on chan 2
> _______________________________________________
> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
> Intercomunicadores para acesso remoto via rede IP. Conheça em
> www.Khomp.com.
> _______________________________________________
> DIGIVOICE  Fabricante de Placas de Voz e Channel Bank
> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
> Centro Treinamento - Curso de PABX IP -  Asterisk  - Site
> www.digivoice.com.br
> _______________________________________________
> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
> _______________________________________________
> Para remover seu email desta lista, basta enviar um email em branco para
> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>



-- 
--
Roger Pitigliani
rogerwinter em gmail.com
Skype: roger.pitigliani
-------------- Próxima Parte ----------
Um anexo em HTML foi limpo...
URL: http://listas.asteriskbrasil.org/pipermail/asteriskbrasil/attachments/20130326/ec9c6c8c/attachment.htm