[AsteriskBrasil] chan_dongle

[Alejandro Flores]

Pessoal,

Instalei e configurei um Huawei E156 e o chan_dongle.
O módulo carrega normal no asterisk, o dongle0 é listado beleza no 'dongle
show devices', porém, aparece a mensagem:

State: GSM not ready

Alguém ja passou por isso?

> dongle show device state dongle0
-------------- Status -------------
  Device                  : dongle0
  State                   : GSM not registered
  Audio                   : /dev/ttyUSB1
  Data                    : /dev/ttyUSB2
  Voice                   : Yes
  SMS                     : Yes
  Manufacturer            : huawei
  Model                   : E156
  Firmware                : 11.609.10.00.264
  IMEI                    : ##OMITIDO##
  IMSI                    : ##OMITIDO##
  GSM Registration Status : Not registered, not searching
  RSSI                    : 14, -117 dBm
  Mode                    : No Service
  Submode                 : No service
  Provider Name           : Oi
  Location area code      :
  Cell ID                 :
  Subscriber Number       : Unknown
  SMS Service Center      : +550310000010
  Use UCS-2 encoding      : Yes
  USSD use 7 bit encoding : No
  USSD use UCS-2 decoding : Yes
  Tasks in queue          : 0
  Commands in queue       : 0
  Call Waiting            : Disabled
  Current device state    : start
  Desired device state    : start
  When change state       : now
  Calls/Channels          : 0
    Active                : 0
    Held                  : 0
    Dialing               : 0
    Alerting              : 0
    Incoming              : 0
    Waiting               : 0
    Releasing             : 0
    Initializing          : 0


-- 
Obrigado!
Alejandro Flores
Office:  81 4062-9805
Mobile: 81 8186-9432
http://www.triforsec.com.br/
http://www.dialtelecom.com.br/
-------------- Próxima Parte ----------
Um anexo em HTML foi limpo...
URL: http://listas.asteriskbrasil.org/pipermail/asteriskbrasil/attachments/20140401/4f1c0357/attachment.htm