[AsteriskBrasil] DONGLE

[Leonardo Sena]

Adicionando informação

quando tento fazer a chamada

*CLI>
  == Using SIP RTP CoS mark 5
    -- Executing [9090985020561 at teste:1] Dial("SIP/1000-00000000",
"dongle/g0/9090985020561") in new stack
    -- Called dongle/g0/9090985020561
[Jun  8 12:24:05] ERROR[6288]: at_response.c:467 at_response_error:
[dongle0] Dial failed
    -- Dongle/dongle0-0100000000 is circuit-busy
  == Everyone is busy/congested at this time (1:0/1/0)
    -- Auto fallthrough, channel 'SIP/1000-00000000' status is 'CONGESTION'


depois da segunda tentativa

>
  == Using SIP RTP CoS mark 5
    -- Executing [9090985020561 at teste:1] Dial("SIP/1000-00000007",
"dongle/g0/9090985020561") in new stack
[Jun  8 13:42:09] WARNING[19580]: channel.c:166 channel_request: [g0]
Request to call on device which can not make call at this moment
[Jun  8 13:42:09] WARNING[19580]: app_dial.c:2345 dial_exec_full: Unable to
create channel of type 'dongle' (cause 44 - Requested channel not available)
  == Everyone is busy/congested at this time (1:0/0/1)
    -- Auto fallthrough, channel 'SIP/1000-00000007' status is 'CHANUNAVAIL'




2015-06-08 14:30 GMT-03:00 Leonardo Sena <leosud at gmail.com>:

> Srs
>
>
> Estou fazendo testes no chan_dongle com o modem E156 consigo enviar sms e
> receber, porem chamadas não esta funcionando, nao sei bem o que acontece
>
> Alguem pode dar uma força a feature de voice ja esta habilitada
>
> gw-boss*CLI> dongle show devices
> ID           Group State      RSSI Mode Submode Provider Name  Model
>  Firmware          IMEI             IMSI             Number
> dongle0      0     Dialing    10   0    0       Vivo           E156C
>  11.608.05.00.00   35864102XXX  724101910XXX  +5511998951452
>
>
> w-boss*CLI> dongle show device state dongle0
> -------------- Status -------------
>   Device                  : dongle0
>   State                   : Dialing
>   Audio                   : /dev/ttyUSB0
>   Data                    : /dev/ttyUSB1
>   Voice                   : Yes
>   SMS                     : Yes
>   Manufacturer            : huawei
>   Model                   : E156C
>   Firmware                : 11.608.05.00.00
>   IMEI                    :
>   IMSI                    :
>   GSM Registration Status : Registered, home network
>   RSSI                    : 10, -93 dBm
>   Mode                    : No Service
>   Submode                 : No service
>   Provider Name           : Vivo
>   Location area code      : 9DDB
>   Cell ID                 : A50E
>   Subscriber Number       : +5511998951452
>   SMS Service Center      : +550101102010
>   Use UCS-2 encoding      : Yes
>   USSD use 7 bit encoding : No
>   USSD use UCS-2 decoding : Yes
>   Tasks in queue          : 0
>   Commands in queue       : 0
>   Call Waiting            : Disabled
>   Current device state    : start
>   Desired device state    : start
>   When change state       : now
>   Calls/Channels          : 1
>     Active                : 0
>     Held                  : 0
>     Dialing               : 0
>     Alerting              : 0
>     Incoming              : 0
>     Waiting               : 0
>     Releasing             : 0
>     Initializing          : 1
>
>
> root at gw:/etc/asterisk# lsusb
> Bus 001 Device 013: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA
> Modem / E230/E270/E870 HSDPA/HSUPA Modem
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://asteriskbrasil.org/pipermail/asteriskbrasil/attachments/20150608/9f1ef27c/attachment-0001.html>