[AsteriskBrasil] Chamada Presa E1 VIVO em R2

[Artur Meissner]

Olá galera,

Os logs ficaram muito grandes, então deixei eles em uma pasta aqui:
http://bit.ly/1V6c9RN

Vlw pela ajuda.

2016-05-16 11:50 GMT-03:00 Artur Meissner <arturmnt at gmail.com>:

> Olá Rafael,
>
> Esta travando em ativo.
>
> Já vou enviar uns logs aqui pra gente,
>
> Vlw
>
> On Mon, May 16, 2016 at 10:52 AM, eduardo <eduardo at abcconnect.com.br>
> wrote:
>
>>
>>
>> Em 15-05-2016 19:52, Rafael Gonçalves escreveu:
>>
>> Artur,
>> Está trancando em que momento?
>> Receptivo ou ativo?
>> Envia os logs ...
>> Abraço!
>> Em 13/05/2016 15:42, "Artur Meissner" <arturmnt at gmail.com> escreveu:
>>
>>> Olá lista,
>>>
>>> Tive um problema com chamadas presas em um gw que configurei pra um
>>> cliente.
>>>
>>> Abri chamado com a Vivo e ela não identificou problema no link.
>>>
>>> Alguém teria uma dica de como identificar como essas chamadas ficam
>>> presas e uma possível ideia pra eliminar isso?
>>>
>>> Eu fiz as seguintes configurações:
>>> digivoice.conf
>>> [general]
>>> consolelanguage=br
>>> allow_ulaw=1
>>> allow_alaw=1
>>> allow_slinear=0
>>> allow_gsm=0
>>>
>>> [allportsconfig]
>>> default_callprogress=cp_default.cfg
>>> detectiontype=1
>>> dialtype=1
>>> afterdialpause=1000
>>>
>>> ringbacktone1=tone1
>>> ringbacktone2=tone1
>>> ringbacktimes=1000,4000,1000,4000
>>>
>>> busytone1=tone1
>>> busytone2=tone1
>>> busytimes=250,250,250,250
>>>
>>> subchannelringtone1=tone1
>>> subchannelringtone2=tone1
>>> subchannelringtimes=100,100,100,5000
>>>
>>> [groups]
>>> group=1
>>> ports=>1-60
>>>
>>> ;group=2
>>> ;ports=>31-60
>>>
>>> [port_config]
>>> signalling=r2mfc_ndis_variable
>>> context=from-pstn
>>> language=pt_BR
>>> accountcode=
>>> musiconhold=
>>> tx_gain=0
>>> rx_gain=0
>>> echotype=dsp
>>> echocan=2
>>> echotraining=400
>>> callprogress=cp_default.cfg
>>> silence_threshold=-42
>>> relaxdtmf=1
>>> gen_dtmf=1
>>> gen_ringback=1
>>> gen_busy=1
>>> dtmf_to_asterisk=2
>>> faxdetection=1
>>> fax_pass_through=1
>>> drop_tx_samples_factor=33
>>> r2_country=br
>>> min_digits_rx=1
>>> max_digits_rx=20
>>> interdigit_timeout=2000
>>> cid_pos=1
>>> category=1
>>> group_b_value=1
>>> wait_group_b=0
>>> port_id=
>>> b_subscriber_hangup=1
>>> ccb_pass_through=0
>>> vconf_pass_through=0
>>> wait_dialtone=1
>>> dialtone_timeout=3000
>>> ports=>1-60
>>>
>>> [e1_config]
>>> e1_sync=1
>>> use_crc4=0
>>> span=1,cas
>>> span=2,cas
>>> cards=>1
>>>
>>> extensions.conf
>>> [globals]
>>> PROTO01=SIP
>>> PROTO02=IAX2
>>>
>>> [macro-hanguptdm]
>>> exten => s,1,NoOp(Macro HangupCause)
>>> same => n,Set(CDR(isdn_original)=${HANGUPCAUSE})
>>> same => n,GotoIf($["${HANGUPCAUSE}"="34"]?release1)
>>> same => n,GotoIf($["${HANGUPCAUSE}"="18"]?release1)
>>> same => n,GotoIf($["${HANGUPCAUSE}"="20"]?release1)
>>> same => n,GotoIf($["${HANGUPCAUSE}"="21"]?release1)
>>> same => n(release1),NoOp(Canal Utilizado: ${CDR(dstchannel)})
>>> same => n,Hangup(42)
>>> same => n,Set(CDR(isdn)=${HANGUPCAUSE})
>>>
>>>
>>> [E1VIVO]
>>> exten => _09845.,1,Noop(CLIENTE 1)
>>> same => n,Noop(NUMERO DISCADO: ${EXTEN})
>>> same => n,Dial(DGV/g/015${EXTEN:7},60,gS(7200),gS(7200))
>>> same => n,Noop(STATUS DE DESLIGAMENTO: ${HANGUPCAUSE})
>>> same => n,Macro(hanguptdm,${HANGUPCAUSE})
>>>
>>> exten => h,1,NoOp(HANGUP CAUSE)
>>> same => n,Noop(STATUS DE DESLIGAMENTO: ${HANGUPCAUSE})
>>> same => n,Macro(hanguptdm,${HANGUPCAUSE})
>>> same => n,Set(CDR(isdn_original)=${HANGUPCAUSE})
>>> same => n,Set(CDR(isdn)=${HANGUPCAUSE})
>>> same => n,Hangup()
>>>
>>> sip.conf
>>> [general]
>>> bindaddr = 0.0.0.0
>>> externip = XXX.XXX.XXX.XXX
>>> bindport = 5060
>>> srvlookup = yes
>>> transport = udp
>>> t38pt_udptl = yes
>>> rtptimeout=60
>>> rtpholdtimeout=60
>>> disallow = all
>>> allow = g729
>>> allow = alaw
>>> allow = ulaw
>>> externrefresh = 300
>>> maxcallbitrate = 384  ;bites
>>> maxexpiry = 10000
>>> minexpiry = 1000
>>> defaultexpiry = 1800
>>> alwaysauthreject = yes
>>> allowguest = no
>>> nat = force_rport,comedia
>>> qualify = no
>>> limitonpeer = no
>>> dtmfmode = rfc2833
>>> rtcachefriends = yes
>>> context = default
>>> directmedia=no
>>>
>>>
>>> _______________________________________________
>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1
>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7
>>> Intercomunicador e acesso remoto via rede IP e telefones IP
>>> Conheça todo o portfólio em www.Khomp.com
>>> _______________________________________________
>>> Para remover seu email desta lista, basta enviar um email em branco para
>>> asteriskbrasil-unsubscribe at listas.asteriskbrasil.org
>>>
>>
>>
>> _______________________________________________
>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1
>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7
>> Intercomunicador e acesso remoto via rede IP e telefones IP
>> Conheça todo o portfólio em www.Khomp.com
>> _______________________________________________
>> Para remover seu email desta lista, basta enviar um email em branco para asteriskbrasil-unsubscribe at listas.asteriskbrasil.org
>>
>>
>> --
>> Bom dia, Amigo.
>>
>> Estamos esperando os "logs"
>>
>> ok?
>>
>> att,
>> Eduardo araujo
>>
>> _______________________________________________
>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1
>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7
>> Intercomunicador e acesso remoto via rede IP e telefones IP
>> Conheça todo o portfólio em www.Khomp.com
>> _______________________________________________
>> Para remover seu email desta lista, basta enviar um email em branco para
>> asteriskbrasil-unsubscribe at listas.asteriskbrasil.org
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://asteriskbrasil.org/pipermail/asteriskbrasil/attachments/20160516/e9e97095/attachment.html>