On 8/14/06, <b class="gmail_sendername">Fabio Vasco</b> <<a href="mailto:fabiohvgomes@hotmail.com">fabiohvgomes@hotmail.com</a>> wrote:<div><span class="gmail_quote"></span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Ralph,<br>/etc/zaptel.conf e /etc/asterisk/zapata.conf<br>zttool<br>lspci -v<br>Deixa a gente ver isso...<br>Que Linux vc. está usando?<br>Abraços,<br>FHV<br><br>>From: "Ralph Liebessohn" <<a href="mailto:ralphliebessohn@gmail.com">
ralphliebessohn@gmail.com</a>><br>>Reply-To: <a href="mailto:asteriskbrasil@listas.asteriskbrasil.org">asteriskbrasil@listas.asteriskbrasil.org</a><br>>To: <a href="mailto:asteriskbrasil@listas.asteriskbrasil.org">
asteriskbrasil@listas.asteriskbrasil.org</a><br>>Subject: [AsteriskBrasil] digium card não funciona<br>>Date: Fri, 11 Aug 2006 16:50:28 +0000<br>><br>>boa tarde,<br>><br>><br>>pessoal, estou com um probleminha aqui com uma placa da digium.
<br>>Inicialmente comecei com o asterisk em um computador comum sempron com<br>>placa<br>>mãe pcchips e coloquei pra funcionar uma TE406P. Até ai tudo lindo.<br>>Agora colocando o asterisk pra rodar num P4 Dual com placa mãe intel
<br>>(d101ggc) tudo aparentemente funciona, o asterisk compila, roda, liga de<br>>sip<br>>pra sip, os modulos zaptel compilam, carregam, configuram, mas na hora de<br>>ligar mesmo PAM !<br>>Recebo isso.<br>
><br>>Connected to Asterisk <a href="http://1.2.7.1">1.2.7.1</a> currently running on astk (pid = 4174)<br>>Verbosity is at least 99<br>>Core debug is at least 99<br>> -- Executing Dial("SIP/12347-1574", "ZAP/g1/21226551") in new stack
<br>> -- Requested transfer capability: 0x00 - SPEECH<br>> -- Called g1/21226551<br>> == Primary D-Channel on span 1 down<br>>Aug 11 12:05:11 WARNING[4219]: chan_zap.c:2298 pri_find_dchan: No<br>>D-channels
<br>>available! Using Primary channel 16 as D-channel anyway!<br>> -- Hungup 'Zap/1-1'<br>> == Everyone is busy/congested at this time (1:0/0/1)<br>> -- Executing Hangup("SIP/12347-1574", "") in new stack
<br>> == Primary D-Channel on span 1 down<br>>Aug 11 12:05:14 WARNING[4219]: chan_zap.c:2298 pri_find_dchan: No<br>>D-channels<br>>available! Using Primary channel 16 as D-channel anyway!<br>><br>>Saída /var/log/asterisk/full:
<br>>Aug 11 11:53:30 DEBUG[4323] chan_sip.c: Allocating new SIP dialog for<br>><a href="mailto:ff3e5bab-e0089797@192.168.11.192">ff3e5bab-e0089797@192.168.11.192</a> - INVITE (With RTP)<br>>Aug 11 11:53:30 DEBUG[4323] chan_sip.c: **** Received INVITE (5) - Command
<br>>in SIP INVITE<br>>Aug 11 11:53:30 DEBUG[4323] chan_sip.c: * SIP extension value: 0 for call<br>><a href="mailto:ff3e5bab-e0089797@192.168.11.192">ff3e5bab-e0089797@192.168.11.192</a><br>>Aug 11 11:53:30 DEBUG[4323] chan_sip.c: Setting NAT on RTP to 524288
<br>>Aug 11 11:53:30 DEBUG[4323] chan_sip.c: = Found Their Call ID:<br>><a href="mailto:ff3e5bab-e0089797@192.168.11.192">ff3e5bab-e0089797@192.168.11.192</a> Their Tag 53fbac9bdac9fb67o1<br>>Our tag: as0681a10d<br>
>Aug 11 11:53:30 DEBUG[4323] chan_sip.c: **** Received ACK (6) - Command in<br>>SIP ACK<br>>Aug 11 11:53:30 DEBUG[4323] chan_sip.c: Stopping retransmission on '<br>><a href="mailto:ff3e5bab-e0089797@192.168.11.192">
ff3e5bab-e0089797@192.168.11.192</a>' of Response 101: Match<br>>Found<br>>Aug 11 11:53:31 DEBUG[4323] chan_sip.c: = Found Their Call ID:<br>><a href="mailto:ff3e5bab-e0089797@192.168.11.192">ff3e5bab-e0089797@192.168.11.192
</a> Their Tag 53fbac9bdac9fb67o1<br>>Our tag: as0681a10d<br>>Aug 11 11:53:31 DEBUG[4323] chan_sip.c: **** Received INVITE (5) - Command<br>>in SIP INVITE<br>>Aug 11 11:53:31 DEBUG[4323] chan_sip.c: * SIP extension value: 0 for call
<br>><a href="mailto:ff3e5bab-e0089797@192.168.11.192">ff3e5bab-e0089797@192.168.11.192</a><br>>Aug 11 11:53:31 DEBUG[4323] chan_sip.c: Setting NAT on RTP to 524288<br>>Aug 11 11:53:31 DEBUG[4323] chan_sip.c: Checking SIP call limits for device
<br>>12347<br>>Aug 11 11:53:31 DEBUG[4323] chan_sip.c: Updating call counter for incoming<br>>call<br>>Aug 11 11:53:31 DEBUG[4323] chan_sip.c: build_route: Contact hop: Linksys 2<br>><sip:12347@192.168.11.192
:5061><br>>Aug 11 11:53:31 DEBUG[4315] chan_sip.c: Checking device state for peer<br>>12347<br>>Aug 11 11:53:31 DEBUG[4315] devicestate.c: Changing state for SIP/12347 -<br>>state 2 (In use)<br>>Aug 11 11:53:31 DEBUG[4610]
pbx.c: Launching 'Dial'<br>>Aug 11 11:53:31 VERBOSE[4610] logger.c: -- Executing<br>>Dial("SIP/12347-d99a", "ZAP/g1/21226551") in new stack<br>>Aug 11 11:53:31 DEBUG[4610] chan_zap.c: Using channel 1
<br>>Aug 11 11:53:31 DEBUG[4610] channel.c: Not copying variable<br>>STACK-default-21226551-1.<br>>Aug 11 11:53:31 DEBUG[4610] channel.c: Not copying variable SIPCALLID.<br>>Aug 11 11:53:31 DEBUG[4610] channel.c
: Not copying variable SIPUSERAGENT.<br>>Aug 11 11:53:31 DEBUG[4610] channel.c: Not copying variable SIPDOMAIN.<br>>Aug 11 11:53:31 DEBUG[4610] channel.c: Not copying variable SIPURI.<br>>Aug 11 11:53:31 VERBOSE[4610]
logger.c: -- Requested transfer<br>>capability: 0x00 - SPEECH<br>>Aug 11 11:53:31 VERBOSE[4610] logger.c: -- Called g1/21226551<br>>Aug 11 11:53:31 DEBUG[4610] channel.c: Set channel Zap/1-1 to read format
<br>>slin<br>>Aug 11 11:53:31 DEBUG[4610] channel.c: Set channel SIP/12347-d99a to write<br>>format slin<br>>Aug 11 11:53:31 DEBUG[4610] channel.c: Set channel SIP/12347-d99a to read<br>>format slin<br>>Aug 11 11:53:31 DEBUG[4610]
channel.c: Set channel Zap/1-1 to write format<br>>slin<br>>Aug 11 11:53:31 DEBUG[4611] app_queue.c: Device 'SIP/12347' changed to<br>>state<br>>'2' (In use)<br>>Aug 11 11:53:31 DEBUG[4315] devicestate.c: Changing state for Zap/1 - state
<br>>2 (In use)<br>>Aug 11 11:53:31 DEBUG[4315] devicestate.c: Changing state for Zap/1 - state<br>>2 (In use)<br>>Aug 11 11:53:31 DEBUG[4612] app_queue.c: Device 'Zap/1' changed to state<br>>'2'<br>>(In use)
<br>>Aug 11 11:53:31 DEBUG[4613] app_queue.c: Device 'Zap/1' changed to state<br>>'2'<br>>(In use)<br>>Aug 11 11:53:31 DEBUG[4610] rtp.c: Ooh, format changed from unknown to ulaw<br>>Aug 11 11:53:34 VERBOSE[4364]
logger.c: == Primary D-Channel on span 1<br>>down<br>>Aug 11 11:53:34 WARNING[4364] chan_zap.c: No D-channels available! Using<br>>Primary channel 16 as D-channel anyway!<br>>Aug 11 11:53:34 DEBUG[4610] channel.c
: Hanging up channel 'Zap/1-1'<br>>Aug 11 11:53:34 DEBUG[4610] chan_zap.c: zt_hangup(Zap/1-1)<br>>Aug 11 11:53:34 DEBUG[4610] chan_zap.c: Set option AUDIO MODE, value: ON(1)<br>>on Zap/1-1<br>>Aug 11 11:53:34 DEBUG[4610] chan_zap.c: Hangup: channel: 1 index = 0,
<br>>normal<br>>= 22, callwait = -1, thirdcall = -1<br>>Aug 11 11:53:34 DEBUG[4610] chan_zap.c: disabled echo cancellation on<br>>channel 1<br>>Aug 11 11:53:34 DEBUG[4610] chan_zap.c: Set option TDD MODE, value: OFF(0)
<br>>on Zap/1-1<br>>Aug 11 11:53:34 DEBUG[4610] chan_zap.c: Updated conferencing on 1, with 0<br>>conference users<br>>Aug 11 11:53:34 DEBUG[4610] chan_zap.c: Set option AUDIO MODE, value:<br>>OFF(0)<br>>on Zap/1-1
<br>>Aug 11 11:53:34 DEBUG[4610] chan_zap.c: disabled echo cancellation on<br>>channel 1<br>>Aug 11 11:53:34 VERBOSE[4610] logger.c: -- Hungup 'Zap/1-1'<br>>Aug 11 11:53:34 VERBOSE[4610] logger.c: == Everyone is busy/congested at
<br>>this time (1:0/0/1)<br>>Aug 11 11:53:34 DEBUG[4610] app_dial.c: Exiting with<br>>DIALSTATUS=CHANUNAVAIL.<br>>Aug 11 11:53:34 DEBUG[4610] pbx.c: Launching 'Hangup'<br>>Aug 11 11:53:34 VERBOSE[4610] logger.c
: -- Executing<br>>Hangup("SIP/12347-d99a", "") in new stack<br>>Aug 11 11:53:34 DEBUG[4610] pbx.c: Spawn extension (default,21226551,2)<br>>exited non-zero on 'SIP/12347-d99a'<br>>Aug 11 11:53:34 DEBUG[4315]
devicestate.c: Changing state for Zap/1 - state<br>>0 (Unknown)<br>>Aug 11 11:53:34 DEBUG[4614] app_queue.c: Device 'Zap/1' changed to state<br>>'0'<br>>(Unknown)<br>>Aug 11 11:53:34 DEBUG[4610] cdr_pgsql.c: cdr_pgsql: inserting a CDR record.
<br>>Aug 11 11:53:34 DEBUG[4610] cdr_pgsql.c: cdr_pgsql: SQL command executed:<br>>INSERT INTO cdr (calldate,clid,src,dst,dcontext,ch<br>>annel,dstchannel,lastapp,lastdata,duration,billsec,disposition,amaflags,accountcode,uniqueid,userfield)
<br>>VALUES ('2006-08-11 1<br>>1:53:31','"Linksys 2" <12347>','12347','21226551','default',<br>>'SIP/12347-d99a','Zap/1-1','Hangup','',3,0,'NO ANSWER',2,'12347'<br>>,'1155308011.4','')<br>>Aug 11 11:53:34 DEBUG[4610]
pbx.c: Function result is '"Linksys 2" <12347>'<br>>Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is '12347'<br>>Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is '21226551'<br>>Aug 11 11:53:34 DEBUG[4610]
pbx.c: Function result is 'default'<br>>Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is 'SIP/12347-d99a'<br>>Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is 'Zap/1-1'<br>>Aug 11 11:53:34 DEBUG[4610] pbx.c
: Function result is 'Hangup'<br>>Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is '(null)'<br>>Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is '2006-08-11 11:53:31'<br>>Aug 11 11:53:34 DEBUG[4610] pbx.c
: Function result is '(null)'<br>>Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is '2006-08-11 11:53:34'<br>>Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is '3'<br>>Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is '0'
<br>>Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is 'NO ANSWER'<br>>Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is 'BILLING'<br>>Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is '12347'<br>>Aug 11 11:53:34 DEBUG[4610]
pbx.c: Function result is '1155308011.4'<br>>Aug 11 11:53:34 DEBUG[4610] pbx.c: Function result is '(null)'<br>>Aug 11 11:53:34 DEBUG[4610] channel.c: Hanging up channel 'SIP/12347-d99a'<br>>Aug 11 11:53:34 DEBUG[4610] chan_sip.c: Hangup call SIP/12347-d99a, SIP
<br>>callid <a href="mailto:ff3e5bab-e0089797@192.168.11.192">ff3e5bab-e0089797@192.168.11.192</a>)<br>>Aug 11 11:53:34 DEBUG[4610] chan_sip.c: update_call_counter(12347) -<br>>decrement call limit counter<br>>Aug 11 11:53:34 DEBUG[4610] chan_sip.c: Updating call counter for incoming
<br>>call<br>>Aug 11 11:53:34 DEBUG[4610] chan_sip.c: AST hangup cause 16 (no match found<br>>in SIP)<br>>Aug 11 11:53:34 DEBUG[4315] chan_sip.c: Checking device state for peer<br>>12347<br>>Aug 11 11:53:34 DEBUG[4315]
devicestate.c: Changing state for SIP/12347 -<br>>state 1 (Not in use)<br>>Aug 11 11:53:34 DEBUG[4615] app_queue.c: Device 'SIP/12347' changed to<br>>state<br>>'1' (Not in use)<br>><br>>Ele simplesmente liga, chia e corta a ligação imediatamente, a partir daí
<br>>as<br>>ligações pelo E1 não se realizam mais.<br>><br>>NOTICE[4981]: app_dial.c:1029 dial_exec_full: Unable to create channel of<br>>type 'ZAP' (cause 34 - Circuit/channel congestion)<br>> == Everyone is busy/congested at this time (1:0/1/0)
<br>><br>>Receber ligação de forma nenhuma.<br>>As mesmas configurações (trocando o hd de máquina) funciona perfeitamente.<br>>Já tentei usar também com outra placa intel e um p4 HT sem dual core, mas a<br>>falha permaneceu.
<br>>Já vi algumas coisas parecidas na lista mas nada que chegue ao amago dessa<br>>questao.<br>>Alguem já viu algo parecido? Tem alguma idéia do que possa ser feito para o<br>>sistema completo funcionar?<br>>
<br>><br>>--<br>>Ralph Liebessohn<br>>ICQ: 74835911<br>>Skype: liebessohn<br></blockquote></div><br><br>Oi Fábio,<br><br><br>vamos as configurações.<br><font size="1">astk:/etc# cat /etc/<span style="font-weight: bold;">
zaptel.conf</span><br><br>span=1,0,1,ccs,hdb3,crc4,yellow<br>#span=2,0,1,ccs,hdb3,crc4,yellow<br>#span=3,0,1,ccs,hdb3,crc4,yellow<br>#span=4,0,1,ccs,hdb3,crc4,yellow<br><br>bchan=1-15,17-31<br>dchan=16<br><br>#bchan=32-46,48-62
<br>#dchan=47<br><br>#bchan=63-77,79-93<br>#dchan=78<br><br>#bchan=94-108,110-124<br>#dchan=109<br><br>loadzone = us<br>loadzone = br<br>defaultzone = br<br><br><br></font><font size="1">astk:/etc# cat /etc/asterisk/<span style="font-weight: bold;">
zapata.conf</span></font><br><font size="1">[trunkgroups]<br><br>[channels]<br>context=default<br>switchtype=national<br>pridialplan=international<br>;signalling=pri_cpe<br>rxwink=300 ; Atlas seems to use long (250ms) winks
<br>usecallerid=yes<br>hidecallerid=no<br>callwaiting=yes<br>usecallingpres=yes<br>callwaitingcallerid=yes<br>threewaycalling=yes<br>transfer=yes<br>canpark=yes<br>cancallforward=yes<br>callreturn=yes<br>echocancel=yes<br>
echocancelwhenbridged=yes<br>echotraining=yes<br>echotraining=400<br>rxgain=0.0<br>txgain=0.0<br><br>group=1<br>callgroup=1<br>pickupgroup=1<br>immediate=no<br>transfertobusy=no<br><br>signalling=pri_cpe<br><br>channel => 1-15,17-31
<br>;channel => 32-46,48-62,63-77,79-93<br>;channel => 94-108,110-124<br><br></font><font style="font-weight: bold;" size="1">astk:/etc# zttool</font><font size="1"><br>Alarms Span
<br>OK T4XXP (PCI) Card 0 Span 1 <br>UNCONFIGURED T4XXP (PCI) Card 0 Span 2 <br>UNCONFIGURED T4XXP (PCI) Card 0 Span 3 <br>UNCONFIGURED T4XXP (PCI) Card 0 Span 4
<br><br>Span1 (Não sei interpretar essas informações)<br>Current Alarms: No alarms. <br>Sync Source: Internally clocked <br>IRQ Misses: 0 <br>Bipolar Viol: 0
<br>Tx/Rx Levels: 1/ 0 <br>Total/Conf/Act: 31/ 31/ 0 <br> 1111111111222222222333 <br>1234567890123456789012345789012 <br><br><span style="font-weight: bold;">astk:/etc# lspci -v
</span><br>00:00.0 Host bridge: ATI Technologies Inc Unknown device 5a33 (rev 01)<br> Subsystem: Intel Corporation Unknown device d600<br> Flags: bus master, 66MHz, medium devsel, latency 64<br> Memory at <ignored> (64-bit, non-prefetchable)
<br><br>00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])<br> Flags: bus master, 66MHz, medium devsel, latency 99<br> Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
<br> I/O behind bridge: 0000e000-0000efff<br> Memory behind bridge: fde00000-fdefffff<br> Prefetchable memory behind bridge: d8000000-dfffffff<br> Capabilities: [b0] #0d [0000]<br><br>00:11.0 IDE interface: ATI Technologies Inc ATI 437A Serial ATA Controller (rev 80) (prog-if 8f [
<br>Master SecP SecO PriP PriO])<br> Subsystem: Intel Corporation Unknown device d600<br> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 185<br> I/O ports at ff00 [size=8]<br> I/O ports at fe00 [size=4]
<br> I/O ports at fd00 [size=8]<br> I/O ports at fc00 [size=4]<br> I/O ports at fb00 [size=16]<br> Memory at fe02f000 (32-bit, non-prefetchable) [size=512]<br> [virtual] Expansion ROM at 80000000 [disabled] [size=512K]
<br> Capabilities: [60] Power Management version 2<br> Capabilities: [50] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-<br><br>00:12.0 IDE interface: ATI Technologies Inc ATI 4379 Serial ATA Controller (rev 80) (prog-if 8f [
<br>Master SecP SecO PriP PriO])<br> Subsystem: Intel Corporation Unknown device d600<br> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 193<br> I/O ports at fa00 [size=8]<br> I/O ports at f900 [size=4]
<br> I/O ports at f800 [size=8]<br> I/O ports at f700 [size=4]<br> I/O ports at f600 [size=16]<br> Memory at fe02e000 (32-bit, non-prefetchable) [size=512]<br> [virtual] Expansion ROM at 80080000 [disabled] [size=512K]
<br> Capabilities: [60] Power Management version 2<br> Capabilities: [50] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-<br><br>00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) (prog-if 10 [
<br>OHCI])<br> Subsystem: Intel Corporation Unknown device d600<br> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 177<br> Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]<br> Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
<br><br>00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) (prog-if 10 [<br>OHCI])<br> Subsystem: Intel Corporation Unknown device d600<br> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 177
<br> Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]<br> Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-<br><br>00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80) (prog-if 20
<br>[EHCI])<br> Subsystem: Intel Corporation Unknown device d600<br> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 177<br> Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]<br> Capabilities: [dc] Power Management version 2
<br> Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-<br><br>00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 82)<br> Subsystem: Intel Corporation Unknown device d600
<br> Flags: 66MHz, medium devsel<br> I/O ports at 0b00 [size=16]<br> Memory at fe02a000 (32-bit, non-prefetchable) [size=1K]<br><br>00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI (rev 80)
<br> (prog-if 8a [Master SecP PriP])<br> Subsystem: Intel Corporation Unknown device d600<br> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 169<br> I/O ports at <unassigned><br> I/O ports at <unassigned>
<br> I/O ports at <unassigned><br> I/O ports at <unassigned><br> I/O ports at f400 [size=16]<br> Capabilities: [70] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-<br><br>00:
14.2 Audio device: ATI Technologies Inc Unknown device 437b (rev 01)<br> Subsystem: Intel Corporation Unknown device d600<br> Flags: bus master, slow devsel, latency 64, IRQ 169<br> Memory at fe024000 (64-bit, non-prefetchable) [size=16K]
<br> Capabilities: [50] Power Management version 2<br> Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-<br><br>00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
<br> Subsystem: Intel Corporation Unknown device d600<br> Flags: bus master, 66MHz, medium devsel, latency 0<br>astk:/etc# lspci -v<br>00:00.0 Host bridge: ATI Technologies Inc Unknown device 5a33 (rev 01)<br>
Subsystem: Intel Corporation Unknown device d600<br> Flags: bus master, 66MHz, medium devsel, latency 64<br> Memory at <ignored> (64-bit, non-prefetchable)<br><br>00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
<br> Flags: bus master, 66MHz, medium devsel, latency 99<br> Bus: primary=00, secondary=01, subordinate=01, sec-latency=68<br> I/O behind bridge: 0000e000-0000efff<br> Memory behind bridge: fde00000-fdefffff
<br> Prefetchable memory behind bridge: d8000000-dfffffff<br> Capabilities: [b0] #0d [0000]<br><br>00:11.0 IDE interface: ATI Technologies Inc ATI 437A Serial ATA Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
<br> Subsystem: Intel Corporation Unknown device d600<br> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 185<br> I/O ports at ff00 [size=8]<br> I/O ports at fe00 [size=4]<br> I/O ports at fd00 [size=8]
<br> I/O ports at fc00 [size=4]<br> I/O ports at fb00 [size=16]<br> Memory at fe02f000 (32-bit, non-prefetchable) [size=512]<br> [virtual] Expansion ROM at 80000000 [disabled] [size=512K]<br> Capabilities: [60] Power Management version 2
<br> Capabilities: [50] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-<br><br>00:12.0 IDE interface: ATI Technologies Inc ATI 4379 Serial ATA Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])<br>
Subsystem: Intel Corporation Unknown device d600<br> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 193<br> I/O ports at fa00 [size=8]<br> I/O ports at f900 [size=4]<br> I/O ports at f800 [size=8]
<br> I/O ports at f700 [size=4]<br> I/O ports at f600 [size=16]<br> Memory at fe02e000 (32-bit, non-prefetchable) [size=512]<br> [virtual] Expansion ROM at 80080000 [disabled] [size=512K]<br> Capabilities: [60] Power Management version 2
<br> Capabilities: [50] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-<br><br>00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) (prog-if 10 [OHCI])<br> Subsystem: Intel Corporation Unknown device d600
<br> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 177<br> Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]<br> Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
<br><br>00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) (prog-if 10 [OHCI])<br> Subsystem: Intel Corporation Unknown device d600<br> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 177
<br> Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]<br> Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-<br><br>00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80) (prog-if 20 [EHCI])
<br> Subsystem: Intel Corporation Unknown device d600<br> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 177<br> Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]<br> Capabilities: [dc] Power Management version 2
<br> Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-<br><br>00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 82)<br> Subsystem: Intel Corporation Unknown device d600
<br> Flags: 66MHz, medium devsel<br> I/O ports at 0b00 [size=16]<br> Memory at fe02a000 (32-bit, non-prefetchable) [size=1K]<br><br>00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI (rev 80) (prog-if 8a [Master SecP PriP])
<br> Subsystem: Intel Corporation Unknown device d600<br> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 169<br> I/O ports at <unassigned><br> I/O ports at <unassigned><br>
I/O ports at <unassigned><br> I/O ports at <unassigned><br> I/O ports at f400 [size=16]<br> Capabilities: [70] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-<br><br>00:14.2
Audio device: ATI Technologies Inc Unknown device 437b (rev 01)<br> Subsystem: Intel Corporation Unknown device d600<br> Flags: bus master, slow devsel, latency 64, IRQ 169<br> Memory at fe024000 (64-bit, non-prefetchable) [size=16K]
<br> Capabilities: [50] Power Management version 2<br> Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-<br><br>00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
<br> Subsystem: Intel Corporation Unknown device d600<br> Flags: bus master, 66MHz, medium devsel, latency 0<br><br>00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) (prog-if 01 [Subtractive decode])
<br> Flags: bus master, VGA palette snoop, 66MHz, medium devsel, latency 64<br> Bus: primary=00, secondary=02, subordinate=02, sec-latency=64<br> I/O behind bridge: 0000d000-0000dfff<br> Memory behind bridge: fdd00000-fddfffff
<br> Prefetchable memory behind bridge: fdc00000-fdcfffff<br><br>01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200] (prog-if 00 [VGA])<br> Subsystem: Intel Corporation Unknown device d600
<br> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 5<br> Memory at d8000000 (32-bit, prefetchable) [size=128M]<br> I/O ports at ee00 [size=256]<br> Memory at fdef0000 (32-bit, non-prefetchable) [size=64K]
<br> [virtual] Expansion ROM at fde00000 [disabled] [size=128K]<br> Capabilities: [50] Power Management version 2<br> Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-<br><br>02:
02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)<br> Subsystem: Intel Corporation Unknown device d600<br> Flags: bus master, medium devsel, latency 64, IRQ 201<br> I/O ports at de00 [size=256]
<br> Memory at fddff000 (32-bit, non-prefetchable) [size=256]<br> Capabilities: [50] Power Management version 2<br><br>02:04.0 Communication controller: Digium, Inc. Wildcard TE405P (2nd Gen) (rev 02)<br> Flags: bus master, medium devsel, latency 64, IRQ 209
<br> Memory at fddfe000 (32-bit, non-prefetchable) [size=128]</font><br><br><font size="1">astk:/etc# <span style="font-weight: bold;">uname -r </span> (Estou usando <span style="font-weight: bold;">Debian</span>)
<br>2.6.16-2-686-smp</font><br><br><br>Essas configurações são as mesmas que funcionam em um Sempron 2400 e não funcionam em um pentium 4 2.8. Testei esse fim de semana em um pentium III 1.0GHz (2 processadores) e funcionou normal também.
<br>Qualquer idéia ou alguma informação a mais que seja necessária para tentar resolver o problema é só mandar.<br><br>-- <br>Ralph Liebessohn<br>ICQ: 74835911<br>Skype: liebessohn