Pessoal,<br><div class="gmail_quote"><br>Estou precisando testar o seguinte cenário:<br><br><pre>+-----------+ +-----------+ <br>| asterisk 1| | asterisk 2| <br>+-----------+ +-----------+ <br>
| |<br>
| |<br>_______|__________________|___________ <br> | |<br> | |<br> | |<br> +-------+ +-------+ <br>
| ATA 1 | | ATA 2 | <br> +-------+ +-------+ <br> / \ / \ <br> / \ / \ </pre> 21 22 10 11<br>
<br><br>Ou seja, tenho 2 asterisks interligados via SIP, dois ATAs com duas linhas, sendo que o ATA1 está registrado no asterisk 1 e o ATA 2 está registrado no asterisk 2 e, todas as chamadas entrantes no asterisk2 vindas do asterisk 1 (via SIP), são atendidas por um DISA.<br>
<br><pre style="font-family: arial,helvetica,sans-serif;">Consigo fazer ligações do ATA 1 para o ATA 2 sem problemas (a chamada vai até o asterisk1 é roteada para o asterisk 2, cai no DISA e eu chamo um dos telefones do ATA2). Estou tentando agora fazer com que a chamada vinda por exemplo do ramal 21, vá até o asterisk 2, caia no DISA e retorne para o asterisk 1 (no ramal 22).<br>
<br>Como sou newbie no assunto, gostaria de saber com os amigos da lista se isto é possível... Ou se existe uma outra forma de fazer isso....<br>Abaixo segue meus arquivos de conf.<br><br>Grande abraço<br><br>César<br><br>
===============================================================================================================================<br><br>Arquivos de conf do asterisk 1<br><br>******<br>sip.conf<br>********<br><br>[21]<br>type=friend <br>
context=phones Where to start in the dialplan when this phone calls<br>secret=21<br>;callerid=John Doe <1234> ; Full caller ID, to override the phones config<br> ; on incoming calls to Asterisk<br>
host=dynamic we have a static but private IP address<br> ; No registration allowed<br>;nat=no ; there is not NAT between phone and Asterisk<br>;canreinvite=yes ; allow RTP voice traffic to bypass Asterisk<br>
;dtmfmode=info ; either RFC2833 or INFO for the BudgeTone<br>;call-limit=1 ; permit only 1 outgoing call and 1 incoming call at a time<br> ; from the phone to asterisk<br>
; 1 for the explicit peer, 1 for the explicit user,<br> ; remember that a friend equals 1 peer and 1 user in<br> ; memory<br> ; This will affect your subscriptions as well.<br>
; There is no combined call counter for a "friend"<br> ; so there's currently no way in sip.conf to limit<br> ; to one inbound or outbound call per phone. Use<br>
; the group counters in the dial plan for that.<br> ;<br>;mailbox=1234@default ; mailbox 1234 in voicemail context "default"<br>disallow=all ; need to disallow=all before we can use allow=<br>
allow=ulaw ; Note: In user sections the order of codecs<br> ; listed with allow= does NOT matter!<br>allow=alaw<br>allow=g723.1 ; Asterisk only supports g723.1 pass-thru!<br>
allow=g729 ; Pass-thru only unless g729 license obtained<br>;callingpres=allowed_passed_screen ; Set caller ID presentation<br> ; See doc/callingpres.txt for more information<br>
<br>[22]<br>type=friend <br>context=phones Where to start in the dialplan when this phone calls<br>secret=22<br>;callerid=John Doe <1234> ; Full caller ID, to override the phones config<br>
; on incoming calls to Asterisk<br>host=dynamic we have a static but private IP address<br> ; No registration allowed<br>;nat=no ; there is not NAT between phone and Asterisk<br>
;canreinvite=yes ; allow RTP voice traffic to bypass Asterisk<br>;dtmfmode=info ; either RFC2833 or INFO for the BudgeTone<br>;call-limit=1 ; permit only 1 outgoing call and 1 incoming call at a time<br>
; from the phone to asterisk<br> ; 1 for the explicit peer, 1 for the explicit user,<br> ; remember that a friend equals 1 peer and 1 user in<br>
; memory<br> ; This will affect your subscriptions as well.<br> ; There is no combined call counter for a "friend"<br>
; so there's currently no way in sip.conf to limit<br> ; to one inbound or outbound call per phone. Use<br> ; the group counters in the dial plan for that.<br>
;<br>;mailbox=1234@default ; mailbox 1234 in voicemail context "default"<br>disallow=all ; need to disallow=all before we can use allow=<br>allow=ulaw ; Note: In user sections the order of codecs<br>
; listed with allow= does NOT matter!<br>allow=alaw<br>allow=g723.1 ; Asterisk only supports g723.1 pass-thru!<br>allow=g729 ; Pass-thru only unless g729 license obtained<br>
;callingpres=allowed_passed_screen ; Set caller ID presentation<br> ; See doc/callingpres.txt for more information<br><br>;comunicação entre asterisks<br><br>[asterisk2]<br>type=friend<br>
secret=welcome<br>context=asterisk2_incoming<br>host=dynamic<br>disallow=all ; need to disallow=all before we can use allow=<br>allow=ulaw ; Note: In user sections the order of codecs<br>
; listed with allow= does NOT matter!<br>allow=alaw<br>allow=g723.1 ; Asterisk only supports g723.1 pass-thru!<br>allow=g729 ; Pass-thru only unless g729 license obtained<br>
<br>****** <br>extensions.conf<br>******<br><br>[phones]<br>include=>internal<br>include=>remote<br><br><br>[internal]<br>exten=>_2x,1,NoOp()<br>exten=>_2x,n,Dial(SIP/${EXTEN},30)<br>exten=>_2x,n,Hangup()<br>
<br>[remote]<br>;exten=>_1x,1,NoOp()<br>exten=>_1x,1,Dial(SIP/asterisk2/${EXTEN})<br>exten=>_3x,1,Dial(SIP/asterisk2/${EXTEN})<br>exten=>_1x,n+101,Hangup()<br>exten=>_3x,n+101,Hangup()<br><br>[asterisk2_incoming]<br>
include=>internal<br><br>**************************************************<br>Arquivos de conf do asterisk 2<br><br>******<br>sip.conf<br>*******<br><br>[10]<br>type=friend <br>context=phones ; Where to start in the dialplan when this phone calls<br>
secret=10<br>;callerid=John Doe <1234> ; Full caller ID, to override the phones config<br> ; on incoming calls to Asterisk<br>host=dynamic we have a static but private IP address<br>
; No registration allowed<br>;nat=no ; there is not NAT between phone and Asterisk<br>;canreinvite=yes ; allow RTP voice traffic to bypass Asterisk<br>
;dtmfmode=info ; either RFC2833 or INFO for the BudgeTone<br>;call-limit=1 ; permit only 1 outgoing call and 1 incoming call at a time<br> ; from the phone to asterisk<br>
; 1 for the explicit peer, 1 for the explicit user,<br> ; remember that a friend equals 1 peer and 1 user in<br> ; memory<br> ; This will affect your subscriptions as well.<br>
; There is no combined call counter for a "friend"<br> ; so there's currently no way in sip.conf to limit<br> ; to one inbound or outbound call per phone. Use<br>
; the group counters in the dial plan for that.<br> ;<br>;mailbox=1234@default ; mailbox 1234 in voicemail context "default"<br>disallow=all ; need to disallow=all before we can use allow=<br>
allow=ulaw ; Note: In user sections the order of codecs<br> ; listed with allow= does NOT matter!<br>allow=alaw<br>allow=g723.1 ; Asterisk only supports g723.1 pass-thru!<br>
allow=g729 ; Pass-thru only unless g729 license obtained<br>;callingpres=allowed_passed_screen ; Set caller ID presentation<br> ; See doc/callingpres.txt for more information<br>
<br>[11]<br>type=friend <br>context=phones ; Where to start in the dialplan when this phone calls<br>secret=11<br>;callerid=John Doe <1234> ; Full caller ID, to override the phones config<br>
; on incoming calls to Asterisk<br>host=dynamic we have a static but private IP address<br> ; No registration allowed<br>;nat=no ; there is not NAT between phone and Asterisk<br>
;canreinvite=yes ; allow RTP voice traffic to bypass Asterisk<br>;dtmfmode=info ; either RFC2833 or INFO for the BudgeTone<br>;call-limit=1 ; permit only 1 outgoing call and 1 incoming call at a time<br>
; from the phone to asterisk<br> ; 1 for the explicit peer, 1 for the explicit user,<br> ; remember that a friend equals 1 peer and 1 user in<br>
; memory<br> ; This will affect your subscriptions as well.<br> ; There is no combined call counter for a "friend"<br>
; so there's currently no way in sip.conf to limit<br> ; to one inbound or outbound call per phone. Use<br> ; the group counters in the dial plan for that.<br>
;<br>;mailbox=1234@default ; mailbox 1234 in voicemail context "default"<br>disallow=all ; need to disallow=all before we can use allow=<br>allow=ulaw ; Note: In user sections the order of codecs<br>
; listed with allow= does NOT matter!<br>allow=alaw<br>allow=g723.1 ; Asterisk only supports g723.1 pass-thru!<br>allow=g729 ; Pass-thru only unless g729 license obtained<br>
;callingpres=allowed_passed_screen ; Set caller ID presentation<br> ; See doc/callingpres.txt for more information<br><br>;****<br>;**** Comunicação entre asterisks<br>;****<br><br>[asterisk1]<br>
type=friend<br>secret=welcome<br>context=asterisk1_incoming<br>host=dynamic<br>disallow=all ; need to disallow=all before we can use allow=<br>allow=ulaw ; Note: In user sections the order of codecs<br>
; listed with allow= does NOT matter!<br>allow=alaw<br>allow=g723.1 ; Asterisk only supports g723.1 pass-thru!<br>allow=g729 ; Pass-thru only unless g729 license obtained<br>
<br>*****************************************************************<br>extensions.conf<br><br>[phones]<br>include=>internal<br>include=>remote<br><br><br>[internal]<br>exten=>_1x,1,NoOp()<br>exten=>_1x,n,Dial(SIP/${EXTEN},30)<br>
exten=>_1x,n+101,Hangup()<br><br>[remote]<br>;exten=>_2x,1,NoOp()<br>exten=>_2x,1,Dial(SIP/asterisk1/${EXTEN})<br>exten=>_2x,n+101,Hangup()<br><br>[asterisk1_incoming]<br>exten=>_1x,1,DISA(no-password,internal)<br>
exten=>_3x,1,DISA(no-password,remote)<br>exten=>_1x,102,Hangup()<br>exten=>_3x,102,Hangup()<br><br></pre><br>
</div><br>