<div>Ola pessoal estou com dificuldades para configurar o meu E1 para placa TE220.</div>
<div> </div>
<div>Mudei na placa o jumpers para E1.</div>
<div>Ta instalado o Dahdi + Asterisk 1.4</div>
<div> </div>
<div>Meu E1 euroisdn.</div>
<div> </div>
<div>Help ? </div>
<div> </div>
<div>Veja o meu dahdi-channels.conf</div>
<div>usecallerid=yes<br>hidecallerid=yes<br>callwaiting=yes<br>callwaitingcallerid=yes<br>threewaycalling=yes<br>transfer=yes<br>cancallforward=yes<br>callreturn=yes<br>immediate=no<br>echocancel=yes<br>echocancelwhenbridged=yes<br>
faxdetect=both</div>
<div>context=from-trunk<br>group=0<br>faxdetect=both<br>callgroup=0<br>pickupgroup=0<br>switchtype=euroisdn<br>signalling=pri_cpe<br>channel => 1-15<br>channel => 17-31</div>
<div>context=from-trunk<br>group=1<br>callgroup=1<br>pickupgroup=1<br>switchtype=euroisdn<br>signalling=pri_cpe<br>channel => 32-46<br>channel => 48-62<br><br clear="all">veja o system.conf</div>
<div></div>
<div> </div>
<div># Autogenerated by /usr/sbin/dahdi_genconf on Sun Oct 11 10:11:42 2009<br># If you edit this file and execute /usr/sbin/dahdi_genconf again,<br># your manual changes will be LOST.<br># Dahdi Configuration File<br>#<br>
# This file is parsed by the Dahdi Configurator, dahdi_cfg<br>#<br># Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS/CRC4 RED<br>span=1,1,0,ccs,hdb3<br># termtype: te<br>bchan=1-15,17-31:1101<br>dchan=16<br>
echocanceller=mg2,1-15,17-31</div>
<div># Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" HDB3/CCS/CRC4 RED<br>span=2,2,0,ccs,hdb3<br># termtype: te<br>bchan=32-46,48-62:1101<br>dchan=47<br>echocanceller=mg2,32-46,48-62</div>
<div># Global data</div>
<div>loadzone = us<br>defaultzone = us<br><br>-- <br>Teste<br></div>