<div>Pessoal estou tetando fazer a sinalizacao da placa subir, mas da erro quando vou reiniciar o dahdi se possivel de uma ajuda?</div>
<div> </div>
<div>/etc/init.d/dahdi restart<br>Unloading DAHDI hardware modules: ERROR: Module dahdi is in use<br>error<br>Loading DAHDI hardware modules:<br> wct4xxp: [ OK ]<br> wcte12xp: [ OK ]<br>
wct1xxp: [ OK ]<br> wcte11xp: [ OK ]<br> wctdm24xxp: [ OK ]<br> wcfxo: [ OK ]<br>
wctdm: [ OK ]<br> wcb4xxp: [ OK ]<br> wctc4xxp: [ OK ]<br> xpp_usb: [ OK ]</div>
<div>Running dahdi_cfg: DAHDI_SPANCONFIG failed on span 1: Invalid argument (22)<br> [FAILED]<br>Arquivo de configuracao !</div>
<div> </div>
<div># Dahdi Configuration File<br>#<br># This file is parsed by the Dahdi Configurator, dahdi_cfg<br>#<br># Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/<br>span=1,1,0,ccs,hdb3<br># termtype: te<br>
bchan=1-15,17-31:1101<br>dchan=16<br>echocanceller=mg2,1-15,17-31</div>
<div># Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2" HDB3/<br>span=2,2,0,ccs,hdb3<br># termtype: te<br>bchan=32-46,48-62:1101<br>dchan=47<br>echocanceller=mg2,32-46,48-62</div>
<div><br># Span 3: WCTDM/0 "Wildcard TDM800P Board 1"<br># fxsks=63<br># echocanceller=mg2,63<br># fxsks=64<br># echocanceller=mg2,64<br># fxsks=65<br># echocanceller=mg2,65<br># fxsks=66<br># echocanceller=mg2,66<br>
# fxoks=67<br># echocanceller=mg2,67<br># fxoks=68<br># echocanceller=mg2,68<br># fxoks=69<br># echocanceller=mg2,69<br># fxoks=70<br># echocanceller=mg2,70</div>
<div># Global data</div>
<div>loadzone = us<br>defaultzone = us<br><br clear="all"><br>-- <br>Teste<br></div>