[AsteriskBrasil] Placa Digivoice com Asterisk

[Alessandro Pimenta]

Bom dia à todos,

    Não estou conseguindo fazer funcionar a minha placa VB6060 da Digivoice
com Asterisk. Eu já baixei o dgvchannel e o voicerlib e segui o manual para
instalação. Quando eu starto o asterisk eu recebo as seguintes mensagens
abaixo e trava a máquina:

 #########################################################
 [chan_dgv.so] => (Digivoice Boards Support)
Aug 28 17:44:49 NOTICE[5200]: chan_dgv.c:3361 load_module: load_module:
starting for Dgv
  == Parsing '/etc/asterisk/digivoice.conf': Found
  == Registered channel type 'Dgv' (Digivoice voice cards Driver)
Aug 28 17:44:49 NOTICE[5200]: chan_dgv.c:3023 setup_dgv: Dgv Channel:
SLINEAR support disabled
Aug 28 17:44:49 NOTICE[5200]: chan_dgv.c:3027 setup_dgv: Dgv Channel: U_LAW
support disabled
Aug 28 17:44:49 NOTICE[5200]: chan_dgv.c:3031 setup_dgv: Dgv Channel: A_LAW
support disabled
Aug 28 17:44:49 NOTICE[5200]: chan_dgv.c:3035 setup_dgv: Dgv Channel: GSM
support enabled
Aug 28 17:44:49 NOTICE[5200]: chan_dgv.c:3039 setup_dgv: Dgv Channel: Force
Single Span - no
Aug 28 17:44:49 NOTICE[5200]: chan_dgv.c:3106 setup_dgv: Configurations for
Dgv Channel:
Aug 28 17:44:49 NOTICE[5200]: chan_dgv.c:3107 setup_dgv: default
detectiontype  = 1
Aug 28 17:44:49 NOTICE[5200]: chan_dgv.c:3108 setup_dgv: ringbacktone1 =
tone1 (5)
Aug 28 17:44:49 NOTICE[5200]: chan_dgv.c:3109 setup_dgv: ringbacktone2 =
tone1 (5)
Aug 28 17:44:49 NOTICE[5200]: chan_dgv.c:3110 setup_dgv: busytone1 = tone1
(5)
Aug 28 17:44:49 NOTICE[5200]: chan_dgv.c:3111 setup_dgv: busytone2 = tone1
(5)
Aug 28 17:44:49 NOTICE[5200]: chan_dgv.c:3114 setup_dgv: ringback_times[0] =
1000
Aug 28 17:44:49 NOTICE[5200]: chan_dgv.c:3114 setup_dgv: ringback_times[1] =
4000
Aug 28 17:44:49 NOTICE[5200]: chan_dgv.c:3114 setup_dgv: ringback_times[2] =
1000
Aug 28 17:44:49 NOTICE[5200]: chan_dgv.c:3116 setup_dgv: busy_times[0] =
1000
Aug 28 17:44:49 NOTICE[5200]: chan_dgv.c:3116 setup_dgv: busy_times[1] =
4000
Aug 28 17:44:49 NOTICE[5200]: chan_dgv.c:3116 setup_dgv: busy_times[2] =
1000
Aug 28 17:44:49 NOTICE[5200]: chan_dgv.c:3119 setup_dgv:
default_call_progress = cp_1232d.cfg
Aug 28 17:44:49 NOTICE[5200]: chan_dgv.c:3129 setup_dgv: audio capabilities
= 2
vlibd->init_plx: Probing Device Name: vlibd
vlibd->plx_countcards: 1 Cards Found
vlibd->plx_probe: ->Probing card number 0
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) ->  IRQ 169
 #########################################################

    Não consigo saber o que está dando de errado. Já cheguei a formatar a
máquina e comerçar do zero, porém sempre que tento startar o asterisk acaba
travando a máquina. Se eu remover o chan_dgv.so do diretório modules o
asterisk carrega normalmente.

    Agradeço qualquer ajuda.

    Sds,

    Alessandro
-------------- Próxima Parte ----------
Um anexo em HTML foi limpo...
URL: http://listas.asteriskbrasil.org/pipermail/asteriskbrasil/attachments/20060829/f98503ae/attachment.html