[AsteriskBrasil] MD3200 + Asterisk

[Emanuel dos Reis Rodrigues]

Olá galera,


Estou tentando configurar um X100p clone com o asterisk, no entanto 
estou com problemas ...

O zaptel está funcionando normalmente e detecta a placa com se vê no dmesg:

Zapata Telephony Interface Registered on major 196
Zaptel Version: 1.4.12.1
Zaptel Echo Canceller: MG2
Registered Tormenta2 PCI
NOTICE-wcfxo: WCFXO/0: Unknown DAA chip revision: REVB=0
wcfxo: DAA mode is 'FCC'
Found a Wildcard FXO: Generic Clone


A saida do comando ztcfg -vvvvv


Zaptel Version: 1.4.12.1
Echo Canceller: MG2
Configuration
======================


Channel map:

Channel 01: FXS Kewlstart (Default) (Slaves: 01)

1 channels to configure.


Quando checo meus canais  no asterisk :


*CLI> dahdi show status

Description                              Alarms     IRQ        
bpviol     CRC4     

Generic Clone Board 1                    RED        0          
0          0        

*CLI>


meu extensions.conf

[default]
exten=>0,1,Dial(Zap/1)
exten=>101,1,dial(SIP/101)
exten=>102,1,dial(SIP/102)
exten=>103,1,dial(SIP/103)
exten=>104,1,dial(SIP/104)


meu zapata.conf

; Autogenerated by /usr/sbin/genzaptelconf -- do not hand edit
; Zaptel Channels Configurations (zapata.conf)
;
; This is not intended to be a complete zapata.conf. Rather, it is intended
; to be #include-d by /etc/zapata.conf that will include the global settings
; Span 1: WCFXO/0 "Generic Clone Board 1" (MASTER) RED
;;; line="1 WCFXO/0/0 FXSKS (In use) RED"
[channels]
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 1
context=default



# Autogenerated by /usr/sbin/genzaptelconf -- do not hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#
# It must be in the module loading order
# Span 1: WCFXO/0 "Generic Clone Board 1" (MASTER) RED
fxsks=1
# Global data
loadzone        = us
defaultzone     = us


Quando tento ligar com discando o 0 :

*CLI>     -- Executing [0 em default:1] Dial("SIP/102-081e9ec8", "Zap/1") 
in new stack
[Nov  2 18:11:56] WARNING[22714]: app_dial.c:1242 dial_exec_full: Unable 
to create channel of type 'Zap' (cause 0 - Unknown)
  == Everyone is busy/congested at this time (1:0/0/1)
  == Auto fallthrough, channel 'SIP/102-081e9ec8' status is 'CHANUNAVAIL'



Alguém poderia me ajudar ? a placa é uma intel MD3200


valeu ...