[AsteriskBrasil] Elastix + Dongle 3g

Everton Carneiro everton em visaotecnologia.com
Segunda Abril 15 16:56:21 BRT 2013


dongle unload chan_dongle.so
dongle load chan_dongle.so


2013/4/15 Otavio Asterisk <otavioasterisk em gmail.com>

> Vou testar agora!
> Uma pergunta besta: alterando essas configs no dongle.conf, basta dar um *dongle
> reload now* no CLI?
>
>
> 2013/4/15 Everton Carneiro <everton em visaotecnologia.com>
>
>> tenta comentando:
>> ;audio=/dev/ttyUSB2              ; tty port for audio connection;
>> no default value
>>
>> ;data=/dev/ttyUSB3               ; tty port for AT commands;
>> no default value
>> e coloca somente o imei
>>
>>
>>
>> 2013/4/15 Otavio Asterisk <otavioasterisk em gmail.com>
>>
>>> praticamente default, alterei apenas o número da usb, e o meu imei e
>>> imsi.
>>>
>>> [general]
>>>
>>> interval=15                     ; Number of seconds between trying to
>>> connect to devices
>>>
>>> ;------------------------------ JITTER BUFFER CONFIGURATION
>>> --------------------------
>>> ;jbenable = yes                 ; Enables the use of a jitterbuffer on
>>> the receiving side of a
>>>                                 ; Dongle channel. Defaults to "no". An
>>> enabled jitterbuffer will
>>>                                 ; be used only if the sending side can
>>> create and the receiving
>>>                                 ; side can not accept jitter. The Dongle
>>> channel can't accept jitter,
>>>                                 ; thus an enabled jitterbuffer on the
>>> receive Dongle side will always
>>>                                 ; be used if the sending side can create
>>> jitter.
>>>
>>> ;jbforce = no                   ; Forces the use of a jitterbuffer on
>>> the receive side of a Dongle
>>>                                 ; channel. Defaults to "no".
>>>
>>> ;jbmaxsize = 200                ; Max length of the jitterbuffer in
>>> milliseconds.
>>>
>>> ;jbresyncthreshold = 1000       ; Jump in the frame timestamps over
>>> which the jitterbuffer is
>>>                                 ; resynchronized. Useful to improve the
>>> quality of the voice, with
>>>                                 ; big jumps in/broken timestamps,
>>> usually sent from exotic devices
>>>                                 ; and programs. Defaults to 1000.
>>>
>>> ;jbimpl = fixed                 ; Jitterbuffer implementation, used on
>>> the receiving side of a Dongle
>>>                                 ; channel. Two implementations are
>>> currently available - "fixed"
>>>                                 ; (with size always equals to jbmaxsize)
>>> and "adaptive" (with
>>>                                 ; variable size, actually the new jb of
>>> IAX2). Defaults to fixed.
>>>
>>> ;jbtargetextra = 40             ; This option only affects the jb when
>>> 'jbimpl = adaptive' is set.
>>>                                 ; The option represents the number of
>>> milliseconds by which the new jitter buffer
>>>                                 ; will pad its size. the default is 40,
>>> so without modification, the new
>>>                                 ; jitter buffer will set its size to the
>>> jitter value plus 40 milliseconds.
>>>                                 ; increasing this value may help if your
>>> network normally has low jitter,
>>>                                 ; but occasionally has spikes.
>>>
>>> ;jblog = no                     ; Enables jitterbuffer frame logging.
>>> Defaults to "no".
>>>
>>> ;-----------------------------------------------------------------------------------
>>>
>>> [defaults]
>>> ; now you can set here any not required device settings as template
>>> ;   sure you can overwrite in any [device] section this default values
>>>
>>> context=from-pstn               ; context for incoming calls
>>> group=0                         ; calling group
>>> rxgain=0                        ; increase the incoming volume; may be
>>> negative
>>> txgain=0                        ; increase the outgoint volume; may be
>>> negative
>>> autodeletesms=yes               ; auto delete incoming sms
>>> resetdongle=yes                 ; reset dongle during initialization
>>> with ATZ command
>>> u2diag=-1                       ; set ^U2DIAG parameter on device (0 =
>>> disable everything except modem function) ; -1 not use ^U2DIAG command
>>> usecallingpres=yes              ; use the caller ID presentation or not
>>> callingpres=allowed_passed_screen ; set caller ID presentation
>>> by default use default network settings
>>> disablesms=no                   ; disable of SMS reading from device
>>> when received
>>>                                 ;  chan_dongle has currently a bug with
>>> SMS reception. When a SMS gets in during a
>>>                                 ;  call chan_dongle might crash. Enable
>>> this option to disable sms reception.
>>>                                 ;  default = no
>>>
>>> language=en                     ; set channel default language
>>> smsaspdu=yes                    ; if 'yes' send SMS in PDU mode, feature
>>> implementation incomplete and we strongly recommend say 'yes'
>>> mindtmfgap=45                   ; minimal interval from end of previews
>>> DTMF from begining of next in ms
>>> mindtmfduration=80              ; minimal DTMF tone duration in ms
>>> mindtmfinterval=200             ; minimal interval between ends of DTMF
>>> of same digits in ms
>>>
>>> callwaiting=auto                ; if 'yes' allow incoming calls waiting;
>>> by default use network settings
>>>                                 ; if 'no' waiting calls just ignored
>>> disable=no                      ; OBSOLETED by initstate: if 'yes' no
>>> load this device and just ignore this section
>>>
>>> initstate=start                 ; specified initial state of device,
>>> must be one of 'stop' 'start' 'remote'
>>>                                 ;   'remove' same as 'disable=yes'
>>>
>>> exten=+1234567890               ; exten for start incoming calls, only
>>> in case of Subscriber Number not available!, also set to CALLERID(ndid)
>>>
>>> dtmf=relax                      ; control of incoming DTMF detection,
>>> possible values:
>>>                                 ;   off    - off DTMF tones detection,
>>> voice data passed to asterisk unaltered
>>>                                 ;              use this value for
>>> gateways or if not use DTMF for AVR or inside dialplan
>>>                                 ;   inband - do DTMF tones detection
>>>                                 ;   relax  - like inband but with
>>> relaxdtmf option
>>>                                 ;  default is 'relax' by compatibility
>>> reason
>>>
>>> ; dongle required settings
>>> [dongle0]
>>> audio=/dev/ttyUSB2              ; tty port for audio connection;
>>> no default value
>>> data=/dev/ttyUSB3               ; tty port for AT commands;
>>> no default value
>>>
>>> ; or you can omit both audio and data together and use
>>> imei=123456789012345 and/or imsi=123456789012345
>>> ;  imei and imsi must contain exactly 15 digits !
>>> ;  imei/imsi discovery is available on Linux only
>>> imei=XXXXXXXXXXXXXXX
>>> imsi=XXXXXXXXXXXXXXX
>>>
>>> ; if audio and data set together with imei and/or imsi audio and data
>>> has precedence
>>> ;   you can use both imei and imsi together in this case exact match by
>>> imei and imsi required
>>>
>>>
>>>
>>>
>>> Em 15 de abril de 2013 15:41, Everton Carneiro <
>>> everton em visaotecnologia.com> escreveu:
>>>
>>> como esta o aquivo dongle.conf?
>>>>
>>>>
>>>> Em 15 de abril de 2013 15:36, Otavio Asterisk <otavioasterisk em gmail.com
>>>> > escreveu:
>>>>
>>>>> Lista, boa tarde.
>>>>> Consegui subir o modem, consigo realizar e receber ligações, no
>>>>> entanto, qnd ligo através do modem, a pessoa q me atende não ouve nada,
>>>>> apenas um chiado e alto e um pouco da minha voz metalizada. O mesmo ocorre
>>>>> qnd ligo para o chip q está no modem: ouço a ura do meu pabx toda
>>>>> metalizada e com muito chiado de fundo.
>>>>> Alguém já passou por isso ou tem alguma dica?
>>>>> Abraço a todos!
>>>>>
>>>>> --
>>>>> Otávio
>>>>>
>>>>> _______________________________________________
>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>>> www.Khomp.com.
>>>>> _______________________________________________
>>>>> DIGIVOICE  Fabricante de Placas de Voz e Channel Bank
>>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>>>>> Centro Treinamento - Curso de PABX IP -  Asterisk  - Site
>>>>> www.digivoice.com.br
>>>>> _______________________________________________
>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>>> _______________________________________________
>>>>> Para remover seu email desta lista, basta enviar um email em branco
>>>>> para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> *Everton Carneiro .:*
>>>> *Visão Tecnologia
>>>> *
>>>> *Fortaleza-CE  85-3044 8888 / 3044-8844
>>>> *
>>>> *Cel: Tim         85-9665 0888
>>>> *
>>>>
>>>>  Preserve o verde, antes de imprimir veja se realmente é necessário.
>>>>
>>>> _______________________________________________
>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>> www.Khomp.com.
>>>> _______________________________________________
>>>> DIGIVOICE  Fabricante de Placas de Voz e Channel Bank
>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>>>> Centro Treinamento - Curso de PABX IP -  Asterisk  - Site
>>>> www.digivoice.com.br
>>>> _______________________________________________
>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>> _______________________________________________
>>>> Para remover seu email desta lista, basta enviar um email em branco
>>>> para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>
>>>
>>>
>>>
>>> --
>>> Otávio
>>>
>>> _______________________________________________
>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>> www.Khomp.com.
>>> _______________________________________________
>>> DIGIVOICE  Fabricante de Placas de Voz e Channel Bank
>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>>> Centro Treinamento - Curso de PABX IP -  Asterisk  - Site
>>> www.digivoice.com.br
>>> _______________________________________________
>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>> _______________________________________________
>>> Para remover seu email desta lista, basta enviar um email em branco para
>>> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>
>>
>>
>>
>> --
>> *Everton Carneiro .:*
>> *Visão Tecnologia
>> *
>> *Fortaleza-CE  85-3044 8888 / 3044-8844
>> *
>> *Cel: Tim         85-9665 0888
>> *
>>
>>  Preserve o verde, antes de imprimir veja se realmente é necessário.
>>
>> _______________________________________________
>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>> www.Khomp.com.
>> _______________________________________________
>> DIGIVOICE  Fabricante de Placas de Voz e Channel Bank
>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>> Centro Treinamento - Curso de PABX IP -  Asterisk  - Site
>> www.digivoice.com.br
>> _______________________________________________
>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>> _______________________________________________
>> Para remover seu email desta lista, basta enviar um email em branco para
>> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>
>
>
>
> --
> Otávio
>
> _______________________________________________
> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
> Intercomunicadores para acesso remoto via rede IP. Conheça em
> www.Khomp.com.
> _______________________________________________
> DIGIVOICE  Fabricante de Placas de Voz e Channel Bank
> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
> Centro Treinamento - Curso de PABX IP -  Asterisk  - Site
> www.digivoice.com.br
> _______________________________________________
> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
> _______________________________________________
> Para remover seu email desta lista, basta enviar um email em branco para
> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>



-- 
*Everton Carneiro .:*
*Visão Tecnologia
*
*Fortaleza-CE  85-3044 8888 / 3044-8844
*
*Cel: Tim         85-9665 0888
*

 Preserve o verde, antes de imprimir veja se realmente é necessário.
-------------- Próxima Parte ----------
Um anexo em HTML foi limpo...
URL: http://listas.asteriskbrasil.org/pipermail/asteriskbrasil/attachments/20130415/2af089e0/attachment-0001.htm 


Mais detalhes sobre a lista de discussão AsteriskBrasil