[AsteriskBrasil] Elastix + Dongle 3g
Otavio Asterisk
otavioasterisk em gmail.com
Segunda Abril 15 17:10:46 BRT 2013
com essa configuração no dongle.conf:
[dongle0]
;audio=/dev/ttyUSB2 ; tty port for audio connection; no
default value
;data=/dev/ttyUSB3 ; tty port for AT commands; no
default value
ele não acha o dongle.
sip*CLI> dongle show devices
ID Group State RSSI Mode Submode Provider Name Model
Firmware IMEI IMSI Number
dongle0 0 Not connec 0 0 0
NONE
Unknown
2013/4/15 Everton Carneiro <everton em visaotecnologia.com>
> dongle unload chan_dongle.so
> dongle load chan_dongle.so
>
>
> 2013/4/15 Otavio Asterisk <otavioasterisk em gmail.com>
>
>> Vou testar agora!
>> Uma pergunta besta: alterando essas configs no dongle.conf, basta dar um
>> *dongle reload now* no CLI?
>>
>>
>> 2013/4/15 Everton Carneiro <everton em visaotecnologia.com>
>>
>>> tenta comentando:
>>> ;audio=/dev/ttyUSB2 ; tty port for audio
>>> connection; no default value
>>>
>>> ;data=/dev/ttyUSB3 ; tty port for AT
>>> commands; no default value
>>> e coloca somente o imei
>>>
>>>
>>>
>>> 2013/4/15 Otavio Asterisk <otavioasterisk em gmail.com>
>>>
>>>> praticamente default, alterei apenas o número da usb, e o meu imei e
>>>> imsi.
>>>>
>>>> [general]
>>>>
>>>> interval=15 ; Number of seconds between trying to
>>>> connect to devices
>>>>
>>>> ;------------------------------ JITTER BUFFER CONFIGURATION
>>>> --------------------------
>>>> ;jbenable = yes ; Enables the use of a jitterbuffer on
>>>> the receiving side of a
>>>> ; Dongle channel. Defaults to "no". An
>>>> enabled jitterbuffer will
>>>> ; be used only if the sending side can
>>>> create and the receiving
>>>> ; side can not accept jitter. The
>>>> Dongle channel can't accept jitter,
>>>> ; thus an enabled jitterbuffer on the
>>>> receive Dongle side will always
>>>> ; be used if the sending side can
>>>> create jitter.
>>>>
>>>> ;jbforce = no ; Forces the use of a jitterbuffer on
>>>> the receive side of a Dongle
>>>> ; channel. Defaults to "no".
>>>>
>>>> ;jbmaxsize = 200 ; Max length of the jitterbuffer in
>>>> milliseconds.
>>>>
>>>> ;jbresyncthreshold = 1000 ; Jump in the frame timestamps over
>>>> which the jitterbuffer is
>>>> ; resynchronized. Useful to improve the
>>>> quality of the voice, with
>>>> ; big jumps in/broken timestamps,
>>>> usually sent from exotic devices
>>>> ; and programs. Defaults to 1000.
>>>>
>>>> ;jbimpl = fixed ; Jitterbuffer implementation, used on
>>>> the receiving side of a Dongle
>>>> ; channel. Two implementations are
>>>> currently available - "fixed"
>>>> ; (with size always equals to
>>>> jbmaxsize) and "adaptive" (with
>>>> ; variable size, actually the new jb of
>>>> IAX2). Defaults to fixed.
>>>>
>>>> ;jbtargetextra = 40 ; This option only affects the jb when
>>>> 'jbimpl = adaptive' is set.
>>>> ; The option represents the number of
>>>> milliseconds by which the new jitter buffer
>>>> ; will pad its size. the default is 40,
>>>> so without modification, the new
>>>> ; jitter buffer will set its size to
>>>> the jitter value plus 40 milliseconds.
>>>> ; increasing this value may help if
>>>> your network normally has low jitter,
>>>> ; but occasionally has spikes.
>>>>
>>>> ;jblog = no ; Enables jitterbuffer frame logging.
>>>> Defaults to "no".
>>>>
>>>> ;-----------------------------------------------------------------------------------
>>>>
>>>> [defaults]
>>>> ; now you can set here any not required device settings as template
>>>> ; sure you can overwrite in any [device] section this default values
>>>>
>>>> context=from-pstn ; context for incoming calls
>>>> group=0 ; calling group
>>>> rxgain=0 ; increase the incoming volume; may be
>>>> negative
>>>> txgain=0 ; increase the outgoint volume; may be
>>>> negative
>>>> autodeletesms=yes ; auto delete incoming sms
>>>> resetdongle=yes ; reset dongle during initialization
>>>> with ATZ command
>>>> u2diag=-1 ; set ^U2DIAG parameter on device (0 =
>>>> disable everything except modem function) ; -1 not use ^U2DIAG command
>>>> usecallingpres=yes ; use the caller ID presentation or not
>>>> callingpres=allowed_passed_screen ; set caller ID presentation
>>>> by default use default network settings
>>>> disablesms=no ; disable of SMS reading from device
>>>> when received
>>>> ; chan_dongle has currently a bug with
>>>> SMS reception. When a SMS gets in during a
>>>> ; call chan_dongle might crash. Enable
>>>> this option to disable sms reception.
>>>> ; default = no
>>>>
>>>> language=en ; set channel default language
>>>> smsaspdu=yes ; if 'yes' send SMS in PDU mode,
>>>> feature implementation incomplete and we strongly recommend say 'yes'
>>>> mindtmfgap=45 ; minimal interval from end of previews
>>>> DTMF from begining of next in ms
>>>> mindtmfduration=80 ; minimal DTMF tone duration in ms
>>>> mindtmfinterval=200 ; minimal interval between ends of DTMF
>>>> of same digits in ms
>>>>
>>>> callwaiting=auto ; if 'yes' allow incoming calls
>>>> waiting; by default use network settings
>>>> ; if 'no' waiting calls just ignored
>>>> disable=no ; OBSOLETED by initstate: if 'yes' no
>>>> load this device and just ignore this section
>>>>
>>>> initstate=start ; specified initial state of device,
>>>> must be one of 'stop' 'start' 'remote'
>>>> ; 'remove' same as 'disable=yes'
>>>>
>>>> exten=+1234567890 ; exten for start incoming calls, only
>>>> in case of Subscriber Number not available!, also set to CALLERID(ndid)
>>>>
>>>> dtmf=relax ; control of incoming DTMF detection,
>>>> possible values:
>>>> ; off - off DTMF tones detection,
>>>> voice data passed to asterisk unaltered
>>>> ; use this value for
>>>> gateways or if not use DTMF for AVR or inside dialplan
>>>> ; inband - do DTMF tones detection
>>>> ; relax - like inband but with
>>>> relaxdtmf option
>>>> ; default is 'relax' by compatibility
>>>> reason
>>>>
>>>> ; dongle required settings
>>>> [dongle0]
>>>> audio=/dev/ttyUSB2 ; tty port for audio connection;
>>>> no default value
>>>> data=/dev/ttyUSB3 ; tty port for AT commands;
>>>> no default value
>>>>
>>>> ; or you can omit both audio and data together and use
>>>> imei=123456789012345 and/or imsi=123456789012345
>>>> ; imei and imsi must contain exactly 15 digits !
>>>> ; imei/imsi discovery is available on Linux only
>>>> imei=XXXXXXXXXXXXXXX
>>>> imsi=XXXXXXXXXXXXXXX
>>>>
>>>> ; if audio and data set together with imei and/or imsi audio and data
>>>> has precedence
>>>> ; you can use both imei and imsi together in this case exact match by
>>>> imei and imsi required
>>>>
>>>>
>>>>
>>>>
>>>> Em 15 de abril de 2013 15:41, Everton Carneiro <
>>>> everton em visaotecnologia.com> escreveu:
>>>>
>>>> como esta o aquivo dongle.conf?
>>>>>
>>>>>
>>>>> Em 15 de abril de 2013 15:36, Otavio Asterisk <
>>>>> otavioasterisk em gmail.com> escreveu:
>>>>>
>>>>>> Lista, boa tarde.
>>>>>> Consegui subir o modem, consigo realizar e receber ligações, no
>>>>>> entanto, qnd ligo através do modem, a pessoa q me atende não ouve nada,
>>>>>> apenas um chiado e alto e um pouco da minha voz metalizada. O mesmo ocorre
>>>>>> qnd ligo para o chip q está no modem: ouço a ura do meu pabx toda
>>>>>> metalizada e com muito chiado de fundo.
>>>>>> Alguém já passou por isso ou tem alguma dica?
>>>>>> Abraço a todos!
>>>>>>
>>>>>> --
>>>>>> Otávio
>>>>>>
>>>>>> _______________________________________________
>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>>>> www.Khomp.com.
>>>>>> _______________________________________________
>>>>>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank
>>>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>>>>>> Centro Treinamento - Curso de PABX IP - Asterisk - Site
>>>>>> www.digivoice.com.br
>>>>>> _______________________________________________
>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>>>> _______________________________________________
>>>>>> Para remover seu email desta lista, basta enviar um email em branco
>>>>>> para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> *Everton Carneiro .:*
>>>>> *Visão Tecnologia
>>>>> *
>>>>> *Fortaleza-CE 85-3044 8888 / 3044-8844
>>>>> *
>>>>> *Cel: Tim 85-9665 0888
>>>>> *
>>>>>
>>>>> Preserve o verde, antes de imprimir veja se realmente é necessário.
>>>>>
>>>>> _______________________________________________
>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>>> www.Khomp.com.
>>>>> _______________________________________________
>>>>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank
>>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>>>>> Centro Treinamento - Curso de PABX IP - Asterisk - Site
>>>>> www.digivoice.com.br
>>>>> _______________________________________________
>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>>> _______________________________________________
>>>>> Para remover seu email desta lista, basta enviar um email em branco
>>>>> para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Otávio
>>>>
>>>> _______________________________________________
>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>> www.Khomp.com.
>>>> _______________________________________________
>>>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank
>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>>>> Centro Treinamento - Curso de PABX IP - Asterisk - Site
>>>> www.digivoice.com.br
>>>> _______________________________________________
>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>> _______________________________________________
>>>> Para remover seu email desta lista, basta enviar um email em branco
>>>> para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>
>>>
>>>
>>>
>>> --
>>> *Everton Carneiro .:*
>>> *Visão Tecnologia
>>> *
>>> *Fortaleza-CE 85-3044 8888 / 3044-8844
>>> *
>>> *Cel: Tim 85-9665 0888
>>> *
>>>
>>> Preserve o verde, antes de imprimir veja se realmente é necessário.
>>>
>>> _______________________________________________
>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>> www.Khomp.com.
>>> _______________________________________________
>>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank
>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>>> Centro Treinamento - Curso de PABX IP - Asterisk - Site
>>> www.digivoice.com.br
>>> _______________________________________________
>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>> _______________________________________________
>>> Para remover seu email desta lista, basta enviar um email em branco para
>>> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>
>>
>>
>>
>> --
>> Otávio
>>
>> _______________________________________________
>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>> www.Khomp.com.
>> _______________________________________________
>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank
>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>> Centro Treinamento - Curso de PABX IP - Asterisk - Site
>> www.digivoice.com.br
>> _______________________________________________
>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>> _______________________________________________
>> Para remover seu email desta lista, basta enviar um email em branco para
>> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>
>
>
>
> --
> *Everton Carneiro .:*
> *Visão Tecnologia
> *
> *Fortaleza-CE 85-3044 8888 / 3044-8844
> *
> *Cel: Tim 85-9665 0888
> *
>
> Preserve o verde, antes de imprimir veja se realmente é necessário.
>
> _______________________________________________
> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
> Intercomunicadores para acesso remoto via rede IP. Conheça em
> www.Khomp.com.
> _______________________________________________
> DIGIVOICE Fabricante de Placas de Voz e Channel Bank
> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
> Centro Treinamento - Curso de PABX IP - Asterisk - Site
> www.digivoice.com.br
> _______________________________________________
> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
> _______________________________________________
> Para remover seu email desta lista, basta enviar um email em branco para
> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>
--
Otávio
-------------- Próxima Parte ----------
Um anexo em HTML foi limpo...
URL: http://listas.asteriskbrasil.org/pipermail/asteriskbrasil/attachments/20130415/478e30a9/attachment-0001.htm
Mais detalhes sobre a lista de discussão AsteriskBrasil