[AsteriskBrasil] Elastix + Dongle 3g

Everton Carneiro everton em visaotecnologia.com
Segunda Abril 15 17:17:45 BRT 2013


você usa elastix se sim levante o asterisk com root.


2013/4/15 Otavio Asterisk <otavioasterisk em gmail.com>

> com essa configuração no dongle.conf:
>
>
> [dongle0]
> ;audio=/dev/ttyUSB2             ; tty port for audio connection;        no
> default value
> ;data=/dev/ttyUSB3              ; tty port for AT commands;             no
> default value
>
> ele não acha o dongle.
>
> sip*CLI> dongle show devices
> ID           Group State      RSSI Mode Submode Provider Name  Model
> Firmware          IMEI             IMSI             Number
> dongle0      0     Not connec 0    0    0
> NONE
> Unknown
>
>
>
> 2013/4/15 Everton Carneiro <everton em visaotecnologia.com>
>
>> dongle unload chan_dongle.so
>> dongle load chan_dongle.so
>>
>>
>> 2013/4/15 Otavio Asterisk <otavioasterisk em gmail.com>
>>
>>> Vou testar agora!
>>> Uma pergunta besta: alterando essas configs no dongle.conf, basta dar um
>>> *dongle reload now* no CLI?
>>>
>>>
>>> 2013/4/15 Everton Carneiro <everton em visaotecnologia.com>
>>>
>>>> tenta comentando:
>>>> ;audio=/dev/ttyUSB2              ; tty port for audio
>>>> connection;        no default value
>>>>
>>>> ;data=/dev/ttyUSB3               ; tty port for AT
>>>> commands;             no default value
>>>> e coloca somente o imei
>>>>
>>>>
>>>>
>>>> 2013/4/15 Otavio Asterisk <otavioasterisk em gmail.com>
>>>>
>>>>> praticamente default, alterei apenas o número da usb, e o meu imei e
>>>>> imsi.
>>>>>
>>>>> [general]
>>>>>
>>>>> interval=15                     ; Number of seconds between trying to
>>>>> connect to devices
>>>>>
>>>>> ;------------------------------ JITTER BUFFER CONFIGURATION
>>>>> --------------------------
>>>>> ;jbenable = yes                 ; Enables the use of a jitterbuffer on
>>>>> the receiving side of a
>>>>>                                 ; Dongle channel. Defaults to "no". An
>>>>> enabled jitterbuffer will
>>>>>                                 ; be used only if the sending side can
>>>>> create and the receiving
>>>>>                                 ; side can not accept jitter. The
>>>>> Dongle channel can't accept jitter,
>>>>>                                 ; thus an enabled jitterbuffer on the
>>>>> receive Dongle side will always
>>>>>                                 ; be used if the sending side can
>>>>> create jitter.
>>>>>
>>>>> ;jbforce = no                   ; Forces the use of a jitterbuffer on
>>>>> the receive side of a Dongle
>>>>>                                 ; channel. Defaults to "no".
>>>>>
>>>>> ;jbmaxsize = 200                ; Max length of the jitterbuffer in
>>>>> milliseconds.
>>>>>
>>>>> ;jbresyncthreshold = 1000       ; Jump in the frame timestamps over
>>>>> which the jitterbuffer is
>>>>>                                 ; resynchronized. Useful to improve
>>>>> the quality of the voice, with
>>>>>                                 ; big jumps in/broken timestamps,
>>>>> usually sent from exotic devices
>>>>>                                 ; and programs. Defaults to 1000.
>>>>>
>>>>> ;jbimpl = fixed                 ; Jitterbuffer implementation, used on
>>>>> the receiving side of a Dongle
>>>>>                                 ; channel. Two implementations are
>>>>> currently available - "fixed"
>>>>>                                 ; (with size always equals to
>>>>> jbmaxsize) and "adaptive" (with
>>>>>                                 ; variable size, actually the new jb
>>>>> of IAX2). Defaults to fixed.
>>>>>
>>>>> ;jbtargetextra = 40             ; This option only affects the jb when
>>>>> 'jbimpl = adaptive' is set.
>>>>>                                 ; The option represents the number of
>>>>> milliseconds by which the new jitter buffer
>>>>>                                 ; will pad its size. the default is
>>>>> 40, so without modification, the new
>>>>>                                 ; jitter buffer will set its size to
>>>>> the jitter value plus 40 milliseconds.
>>>>>                                 ; increasing this value may help if
>>>>> your network normally has low jitter,
>>>>>                                 ; but occasionally has spikes.
>>>>>
>>>>> ;jblog = no                     ; Enables jitterbuffer frame logging.
>>>>> Defaults to "no".
>>>>>
>>>>> ;-----------------------------------------------------------------------------------
>>>>>
>>>>> [defaults]
>>>>> ; now you can set here any not required device settings as template
>>>>> ;   sure you can overwrite in any [device] section this default values
>>>>>
>>>>> context=from-pstn               ; context for incoming calls
>>>>> group=0                         ; calling group
>>>>> rxgain=0                        ; increase the incoming volume; may be
>>>>> negative
>>>>> txgain=0                        ; increase the outgoint volume; may be
>>>>> negative
>>>>> autodeletesms=yes               ; auto delete incoming sms
>>>>> resetdongle=yes                 ; reset dongle during initialization
>>>>> with ATZ command
>>>>> u2diag=-1                       ; set ^U2DIAG parameter on device (0 =
>>>>> disable everything except modem function) ; -1 not use ^U2DIAG command
>>>>> usecallingpres=yes              ; use the caller ID presentation or not
>>>>> callingpres=allowed_passed_screen ; set caller ID
>>>>> presentation          by default use default network settings
>>>>> disablesms=no                   ; disable of SMS reading from device
>>>>> when received
>>>>>                                 ;  chan_dongle has currently a bug
>>>>> with SMS reception. When a SMS gets in during a
>>>>>                                 ;  call chan_dongle might crash.
>>>>> Enable this option to disable sms reception.
>>>>>                                 ;  default = no
>>>>>
>>>>> language=en                     ; set channel default language
>>>>> smsaspdu=yes                    ; if 'yes' send SMS in PDU mode,
>>>>> feature implementation incomplete and we strongly recommend say 'yes'
>>>>> mindtmfgap=45                   ; minimal interval from end of
>>>>> previews DTMF from begining of next in ms
>>>>> mindtmfduration=80              ; minimal DTMF tone duration in ms
>>>>> mindtmfinterval=200             ; minimal interval between ends of
>>>>> DTMF of same digits in ms
>>>>>
>>>>> callwaiting=auto                ; if 'yes' allow incoming calls
>>>>> waiting; by default use network settings
>>>>>                                 ; if 'no' waiting calls just ignored
>>>>> disable=no                      ; OBSOLETED by initstate: if 'yes' no
>>>>> load this device and just ignore this section
>>>>>
>>>>> initstate=start                 ; specified initial state of device,
>>>>> must be one of 'stop' 'start' 'remote'
>>>>>                                 ;   'remove' same as 'disable=yes'
>>>>>
>>>>> exten=+1234567890               ; exten for start incoming calls, only
>>>>> in case of Subscriber Number not available!, also set to CALLERID(ndid)
>>>>>
>>>>> dtmf=relax                      ; control of incoming DTMF detection,
>>>>> possible values:
>>>>>                                 ;   off    - off DTMF tones detection,
>>>>> voice data passed to asterisk unaltered
>>>>>                                 ;              use this value for
>>>>> gateways or if not use DTMF for AVR or inside dialplan
>>>>>                                 ;   inband - do DTMF tones detection
>>>>>                                 ;   relax  - like inband but with
>>>>> relaxdtmf option
>>>>>                                 ;  default is 'relax' by compatibility
>>>>> reason
>>>>>
>>>>> ; dongle required settings
>>>>> [dongle0]
>>>>> audio=/dev/ttyUSB2              ; tty port for audio
>>>>> connection;        no default value
>>>>> data=/dev/ttyUSB3               ; tty port for AT
>>>>> commands;             no default value
>>>>>
>>>>> ; or you can omit both audio and data together and use
>>>>> imei=123456789012345 and/or imsi=123456789012345
>>>>> ;  imei and imsi must contain exactly 15 digits !
>>>>> ;  imei/imsi discovery is available on Linux only
>>>>> imei=XXXXXXXXXXXXXXX
>>>>> imsi=XXXXXXXXXXXXXXX
>>>>>
>>>>> ; if audio and data set together with imei and/or imsi audio and data
>>>>> has precedence
>>>>> ;   you can use both imei and imsi together in this case exact match
>>>>> by imei and imsi required
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Em 15 de abril de 2013 15:41, Everton Carneiro <
>>>>> everton em visaotecnologia.com> escreveu:
>>>>>
>>>>> como esta o aquivo dongle.conf?
>>>>>>
>>>>>>
>>>>>> Em 15 de abril de 2013 15:36, Otavio Asterisk <
>>>>>> otavioasterisk em gmail.com> escreveu:
>>>>>>
>>>>>>> Lista, boa tarde.
>>>>>>> Consegui subir o modem, consigo realizar e receber ligações, no
>>>>>>> entanto, qnd ligo através do modem, a pessoa q me atende não ouve nada,
>>>>>>> apenas um chiado e alto e um pouco da minha voz metalizada. O mesmo ocorre
>>>>>>> qnd ligo para o chip q está no modem: ouço a ura do meu pabx toda
>>>>>>> metalizada e com muito chiado de fundo.
>>>>>>> Alguém já passou por isso ou tem alguma dica?
>>>>>>> Abraço a todos!
>>>>>>>
>>>>>>> --
>>>>>>> Otávio
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>>>>> www.Khomp.com.
>>>>>>> _______________________________________________
>>>>>>> DIGIVOICE  Fabricante de Placas de Voz e Channel Bank
>>>>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>>>>>>> Centro Treinamento - Curso de PABX IP -  Asterisk  - Site
>>>>>>> www.digivoice.com.br
>>>>>>> _______________________________________________
>>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>>>>> _______________________________________________
>>>>>>> Para remover seu email desta lista, basta enviar um email em branco
>>>>>>> para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> *Everton Carneiro .:*
>>>>>> *Visão Tecnologia
>>>>>> *
>>>>>> *Fortaleza-CE  85-3044 8888 / 3044-8844
>>>>>> *
>>>>>> *Cel: Tim         85-9665 0888
>>>>>> *
>>>>>>
>>>>>>  Preserve o verde, antes de imprimir veja se realmente é necessário.
>>>>>>
>>>>>> _______________________________________________
>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>>>> www.Khomp.com.
>>>>>> _______________________________________________
>>>>>> DIGIVOICE  Fabricante de Placas de Voz e Channel Bank
>>>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>>>>>> Centro Treinamento - Curso de PABX IP -  Asterisk  - Site
>>>>>> www.digivoice.com.br
>>>>>> _______________________________________________
>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>>>> _______________________________________________
>>>>>> Para remover seu email desta lista, basta enviar um email em branco
>>>>>> para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Otávio
>>>>>
>>>>> _______________________________________________
>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>>> www.Khomp.com.
>>>>> _______________________________________________
>>>>> DIGIVOICE  Fabricante de Placas de Voz e Channel Bank
>>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>>>>> Centro Treinamento - Curso de PABX IP -  Asterisk  - Site
>>>>> www.digivoice.com.br
>>>>> _______________________________________________
>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>>> _______________________________________________
>>>>> Para remover seu email desta lista, basta enviar um email em branco
>>>>> para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> *Everton Carneiro .:*
>>>> *Visão Tecnologia
>>>> *
>>>> *Fortaleza-CE  85-3044 8888 / 3044-8844
>>>> *
>>>> *Cel: Tim         85-9665 0888
>>>> *
>>>>
>>>>  Preserve o verde, antes de imprimir veja se realmente é necessário.
>>>>
>>>> _______________________________________________
>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>> www.Khomp.com.
>>>> _______________________________________________
>>>> DIGIVOICE  Fabricante de Placas de Voz e Channel Bank
>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>>>> Centro Treinamento - Curso de PABX IP -  Asterisk  - Site
>>>> www.digivoice.com.br
>>>> _______________________________________________
>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>> _______________________________________________
>>>> Para remover seu email desta lista, basta enviar um email em branco
>>>> para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>
>>>
>>>
>>>
>>> --
>>> Otávio
>>>
>>> _______________________________________________
>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>> www.Khomp.com.
>>> _______________________________________________
>>> DIGIVOICE  Fabricante de Placas de Voz e Channel Bank
>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>>> Centro Treinamento - Curso de PABX IP -  Asterisk  - Site
>>> www.digivoice.com.br
>>> _______________________________________________
>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>> _______________________________________________
>>> Para remover seu email desta lista, basta enviar um email em branco para
>>> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>
>>
>>
>>
>> --
>> *Everton Carneiro .:*
>> *Visão Tecnologia
>> *
>> *Fortaleza-CE  85-3044 8888 / 3044-8844
>> *
>> *Cel: Tim         85-9665 0888
>> *
>>
>>  Preserve o verde, antes de imprimir veja se realmente é necessário.
>>
>> _______________________________________________
>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>> www.Khomp.com.
>> _______________________________________________
>> DIGIVOICE  Fabricante de Placas de Voz e Channel Bank
>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>> Centro Treinamento - Curso de PABX IP -  Asterisk  - Site
>> www.digivoice.com.br
>> _______________________________________________
>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>> _______________________________________________
>> Para remover seu email desta lista, basta enviar um email em branco para
>> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>
>
>
>
> --
> Otávio
>
> _______________________________________________
> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
> Intercomunicadores para acesso remoto via rede IP. Conheça em
> www.Khomp.com.
> _______________________________________________
> DIGIVOICE  Fabricante de Placas de Voz e Channel Bank
> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
> Centro Treinamento - Curso de PABX IP -  Asterisk  - Site
> www.digivoice.com.br
> _______________________________________________
> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
> _______________________________________________
> Para remover seu email desta lista, basta enviar um email em branco para
> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>



-- 
*Everton Carneiro .:*
*Visão Tecnologia
*
*Fortaleza-CE  85-3044 8888 / 3044-8844
*
*Cel: Tim         85-9665 0888
*

 Preserve o verde, antes de imprimir veja se realmente é necessário.
-------------- Próxima Parte ----------
Um anexo em HTML foi limpo...
URL: http://listas.asteriskbrasil.org/pipermail/asteriskbrasil/attachments/20130415/7dc7c797/attachment-0001.htm 


Mais detalhes sobre a lista de discussão AsteriskBrasil