[AsteriskBrasil] Elastix + Dongle 3g
Otavio Asterisk
otavioasterisk em gmail.com
Segunda Abril 15 17:23:49 BRT 2013
O imei estava logo abaixo no arquivo, só comentei as linhas citadas:
[dongle0]
;audio=/dev/ttyUSB2 ; tty port for audio connection; no
default value
;data=/dev/ttyUSB3 ; tty port for AT commands; no
default value
; or you can omit both audio and data together and use imei=123456789012345
and/or imsi=123456789012345
; imei and imsi must contain exactly 15 digits !
; imei/imsi discovery is available on Linux only
imei=3586XXXXXXXXXXX
imsi=7241XXXXXXXXXXX
2013/4/15 Everton Carneiro <everton em visaotecnologia.com>
> você usa elastix se sim levante o asterisk com root.
>
>
> 2013/4/15 Otavio Asterisk <otavioasterisk em gmail.com>
>
>> com essa configuração no dongle.conf:
>>
>>
>> [dongle0]
>> ;audio=/dev/ttyUSB2 ; tty port for audio connection;
>> no default value
>> ;data=/dev/ttyUSB3 ; tty port for AT commands;
>> no default value
>>
>> ele não acha o dongle.
>>
>> sip*CLI> dongle show devices
>> ID Group State RSSI Mode Submode Provider Name Model
>> Firmware IMEI IMSI Number
>> dongle0 0 Not connec 0 0 0
>> NONE
>> Unknown
>>
>>
>>
>> 2013/4/15 Everton Carneiro <everton em visaotecnologia.com>
>>
>>> dongle unload chan_dongle.so
>>> dongle load chan_dongle.so
>>>
>>>
>>> 2013/4/15 Otavio Asterisk <otavioasterisk em gmail.com>
>>>
>>>> Vou testar agora!
>>>> Uma pergunta besta: alterando essas configs no dongle.conf, basta dar
>>>> um *dongle reload now* no CLI?
>>>>
>>>>
>>>> 2013/4/15 Everton Carneiro <everton em visaotecnologia.com>
>>>>
>>>>> tenta comentando:
>>>>> ;audio=/dev/ttyUSB2 ; tty port for audio
>>>>> connection; no default value
>>>>>
>>>>> ;data=/dev/ttyUSB3 ; tty port for AT
>>>>> commands; no default value
>>>>> e coloca somente o imei
>>>>>
>>>>>
>>>>>
>>>>> 2013/4/15 Otavio Asterisk <otavioasterisk em gmail.com>
>>>>>
>>>>>> praticamente default, alterei apenas o número da usb, e o meu imei e
>>>>>> imsi.
>>>>>>
>>>>>> [general]
>>>>>>
>>>>>> interval=15 ; Number of seconds between trying to
>>>>>> connect to devices
>>>>>>
>>>>>> ;------------------------------ JITTER BUFFER CONFIGURATION
>>>>>> --------------------------
>>>>>> ;jbenable = yes ; Enables the use of a jitterbuffer
>>>>>> on the receiving side of a
>>>>>> ; Dongle channel. Defaults to "no".
>>>>>> An enabled jitterbuffer will
>>>>>> ; be used only if the sending side
>>>>>> can create and the receiving
>>>>>> ; side can not accept jitter. The
>>>>>> Dongle channel can't accept jitter,
>>>>>> ; thus an enabled jitterbuffer on the
>>>>>> receive Dongle side will always
>>>>>> ; be used if the sending side can
>>>>>> create jitter.
>>>>>>
>>>>>> ;jbforce = no ; Forces the use of a jitterbuffer on
>>>>>> the receive side of a Dongle
>>>>>> ; channel. Defaults to "no".
>>>>>>
>>>>>> ;jbmaxsize = 200 ; Max length of the jitterbuffer in
>>>>>> milliseconds.
>>>>>>
>>>>>> ;jbresyncthreshold = 1000 ; Jump in the frame timestamps over
>>>>>> which the jitterbuffer is
>>>>>> ; resynchronized. Useful to improve
>>>>>> the quality of the voice, with
>>>>>> ; big jumps in/broken timestamps,
>>>>>> usually sent from exotic devices
>>>>>> ; and programs. Defaults to 1000.
>>>>>>
>>>>>> ;jbimpl = fixed ; Jitterbuffer implementation, used
>>>>>> on the receiving side of a Dongle
>>>>>> ; channel. Two implementations are
>>>>>> currently available - "fixed"
>>>>>> ; (with size always equals to
>>>>>> jbmaxsize) and "adaptive" (with
>>>>>> ; variable size, actually the new jb
>>>>>> of IAX2). Defaults to fixed.
>>>>>>
>>>>>> ;jbtargetextra = 40 ; This option only affects the jb
>>>>>> when 'jbimpl = adaptive' is set.
>>>>>> ; The option represents the number of
>>>>>> milliseconds by which the new jitter buffer
>>>>>> ; will pad its size. the default is
>>>>>> 40, so without modification, the new
>>>>>> ; jitter buffer will set its size to
>>>>>> the jitter value plus 40 milliseconds.
>>>>>> ; increasing this value may help if
>>>>>> your network normally has low jitter,
>>>>>> ; but occasionally has spikes.
>>>>>>
>>>>>> ;jblog = no ; Enables jitterbuffer frame logging.
>>>>>> Defaults to "no".
>>>>>>
>>>>>> ;-----------------------------------------------------------------------------------
>>>>>>
>>>>>> [defaults]
>>>>>> ; now you can set here any not required device settings as template
>>>>>> ; sure you can overwrite in any [device] section this default values
>>>>>>
>>>>>> context=from-pstn ; context for incoming calls
>>>>>> group=0 ; calling group
>>>>>> rxgain=0 ; increase the incoming volume; may
>>>>>> be negative
>>>>>> txgain=0 ; increase the outgoint volume; may
>>>>>> be negative
>>>>>> autodeletesms=yes ; auto delete incoming sms
>>>>>> resetdongle=yes ; reset dongle during initialization
>>>>>> with ATZ command
>>>>>> u2diag=-1 ; set ^U2DIAG parameter on device (0
>>>>>> = disable everything except modem function) ; -1 not use ^U2DIAG command
>>>>>> usecallingpres=yes ; use the caller ID presentation or
>>>>>> not
>>>>>> callingpres=allowed_passed_screen ; set caller ID
>>>>>> presentation by default use default network settings
>>>>>> disablesms=no ; disable of SMS reading from device
>>>>>> when received
>>>>>> ; chan_dongle has currently a bug
>>>>>> with SMS reception. When a SMS gets in during a
>>>>>> ; call chan_dongle might crash.
>>>>>> Enable this option to disable sms reception.
>>>>>> ; default = no
>>>>>>
>>>>>> language=en ; set channel default language
>>>>>> smsaspdu=yes ; if 'yes' send SMS in PDU mode,
>>>>>> feature implementation incomplete and we strongly recommend say 'yes'
>>>>>> mindtmfgap=45 ; minimal interval from end of
>>>>>> previews DTMF from begining of next in ms
>>>>>> mindtmfduration=80 ; minimal DTMF tone duration in ms
>>>>>> mindtmfinterval=200 ; minimal interval between ends of
>>>>>> DTMF of same digits in ms
>>>>>>
>>>>>> callwaiting=auto ; if 'yes' allow incoming calls
>>>>>> waiting; by default use network settings
>>>>>> ; if 'no' waiting calls just ignored
>>>>>> disable=no ; OBSOLETED by initstate: if 'yes' no
>>>>>> load this device and just ignore this section
>>>>>>
>>>>>> initstate=start ; specified initial state of device,
>>>>>> must be one of 'stop' 'start' 'remote'
>>>>>> ; 'remove' same as 'disable=yes'
>>>>>>
>>>>>> exten=+1234567890 ; exten for start incoming calls,
>>>>>> only in case of Subscriber Number not available!, also set to CALLERID(ndid)
>>>>>>
>>>>>> dtmf=relax ; control of incoming DTMF detection,
>>>>>> possible values:
>>>>>> ; off - off DTMF tones
>>>>>> detection, voice data passed to asterisk unaltered
>>>>>> ; use this value for
>>>>>> gateways or if not use DTMF for AVR or inside dialplan
>>>>>> ; inband - do DTMF tones detection
>>>>>> ; relax - like inband but with
>>>>>> relaxdtmf option
>>>>>> ; default is 'relax' by
>>>>>> compatibility reason
>>>>>>
>>>>>> ; dongle required settings
>>>>>> [dongle0]
>>>>>> audio=/dev/ttyUSB2 ; tty port for audio
>>>>>> connection; no default value
>>>>>> data=/dev/ttyUSB3 ; tty port for AT
>>>>>> commands; no default value
>>>>>>
>>>>>> ; or you can omit both audio and data together and use
>>>>>> imei=123456789012345 and/or imsi=123456789012345
>>>>>> ; imei and imsi must contain exactly 15 digits !
>>>>>> ; imei/imsi discovery is available on Linux only
>>>>>> imei=XXXXXXXXXXXXXXX
>>>>>> imsi=XXXXXXXXXXXXXXX
>>>>>>
>>>>>> ; if audio and data set together with imei and/or imsi audio and data
>>>>>> has precedence
>>>>>> ; you can use both imei and imsi together in this case exact match
>>>>>> by imei and imsi required
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Em 15 de abril de 2013 15:41, Everton Carneiro <
>>>>>> everton em visaotecnologia.com> escreveu:
>>>>>>
>>>>>> como esta o aquivo dongle.conf?
>>>>>>>
>>>>>>>
>>>>>>> Em 15 de abril de 2013 15:36, Otavio Asterisk <
>>>>>>> otavioasterisk em gmail.com> escreveu:
>>>>>>>
>>>>>>>> Lista, boa tarde.
>>>>>>>> Consegui subir o modem, consigo realizar e receber ligações, no
>>>>>>>> entanto, qnd ligo através do modem, a pessoa q me atende não ouve nada,
>>>>>>>> apenas um chiado e alto e um pouco da minha voz metalizada. O mesmo ocorre
>>>>>>>> qnd ligo para o chip q está no modem: ouço a ura do meu pabx toda
>>>>>>>> metalizada e com muito chiado de fundo.
>>>>>>>> Alguém já passou por isso ou tem alguma dica?
>>>>>>>> Abraço a todos!
>>>>>>>>
>>>>>>>> --
>>>>>>>> Otávio
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>>>>>> www.Khomp.com.
>>>>>>>> _______________________________________________
>>>>>>>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank
>>>>>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>>>>>>>> Centro Treinamento - Curso de PABX IP - Asterisk - Site
>>>>>>>> www.digivoice.com.br
>>>>>>>> _______________________________________________
>>>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e
>>>>>>>> SS7.
>>>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>>>>>> _______________________________________________
>>>>>>>> Para remover seu email desta lista, basta enviar um email em branco
>>>>>>>> para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> *Everton Carneiro .:*
>>>>>>> *Visão Tecnologia
>>>>>>> *
>>>>>>> *Fortaleza-CE 85-3044 8888 / 3044-8844
>>>>>>> *
>>>>>>> *Cel: Tim 85-9665 0888
>>>>>>> *
>>>>>>>
>>>>>>> Preserve o verde, antes de imprimir veja se realmente é necessário.
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>>>>> www.Khomp.com.
>>>>>>> _______________________________________________
>>>>>>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank
>>>>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>>>>>>> Centro Treinamento - Curso de PABX IP - Asterisk - Site
>>>>>>> www.digivoice.com.br
>>>>>>> _______________________________________________
>>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>>>>> _______________________________________________
>>>>>>> Para remover seu email desta lista, basta enviar um email em branco
>>>>>>> para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Otávio
>>>>>>
>>>>>> _______________________________________________
>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>>>> www.Khomp.com.
>>>>>> _______________________________________________
>>>>>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank
>>>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>>>>>> Centro Treinamento - Curso de PABX IP - Asterisk - Site
>>>>>> www.digivoice.com.br
>>>>>> _______________________________________________
>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>>>> _______________________________________________
>>>>>> Para remover seu email desta lista, basta enviar um email em branco
>>>>>> para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> *Everton Carneiro .:*
>>>>> *Visão Tecnologia
>>>>> *
>>>>> *Fortaleza-CE 85-3044 8888 / 3044-8844
>>>>> *
>>>>> *Cel: Tim 85-9665 0888
>>>>> *
>>>>>
>>>>> Preserve o verde, antes de imprimir veja se realmente é necessário.
>>>>>
>>>>> _______________________________________________
>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>>> www.Khomp.com.
>>>>> _______________________________________________
>>>>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank
>>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>>>>> Centro Treinamento - Curso de PABX IP - Asterisk - Site
>>>>> www.digivoice.com.br
>>>>> _______________________________________________
>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>>> _______________________________________________
>>>>> Para remover seu email desta lista, basta enviar um email em branco
>>>>> para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Otávio
>>>>
>>>> _______________________________________________
>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>> www.Khomp.com.
>>>> _______________________________________________
>>>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank
>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>>>> Centro Treinamento - Curso de PABX IP - Asterisk - Site
>>>> www.digivoice.com.br
>>>> _______________________________________________
>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>> _______________________________________________
>>>> Para remover seu email desta lista, basta enviar um email em branco
>>>> para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>
>>>
>>>
>>>
>>> --
>>> *Everton Carneiro .:*
>>> *Visão Tecnologia
>>> *
>>> *Fortaleza-CE 85-3044 8888 / 3044-8844
>>> *
>>> *Cel: Tim 85-9665 0888
>>> *
>>>
>>> Preserve o verde, antes de imprimir veja se realmente é necessário.
>>>
>>> _______________________________________________
>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>> www.Khomp.com.
>>> _______________________________________________
>>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank
>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>>> Centro Treinamento - Curso de PABX IP - Asterisk - Site
>>> www.digivoice.com.br
>>> _______________________________________________
>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>> _______________________________________________
>>> Para remover seu email desta lista, basta enviar um email em branco para
>>> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>
>>
>>
>>
>> --
>> Otávio
>>
>> _______________________________________________
>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>> www.Khomp.com.
>> _______________________________________________
>> DIGIVOICE Fabricante de Placas de Voz e Channel Bank
>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>> Centro Treinamento - Curso de PABX IP - Asterisk - Site
>> www.digivoice.com.br
>> _______________________________________________
>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>> _______________________________________________
>> Para remover seu email desta lista, basta enviar um email em branco para
>> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>
>
>
>
> --
> *Everton Carneiro .:*
> *Visão Tecnologia
> *
> *Fortaleza-CE 85-3044 8888 / 3044-8844
> *
> *Cel: Tim 85-9665 0888
> *
>
> Preserve o verde, antes de imprimir veja se realmente é necessário.
>
> _______________________________________________
> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
> Intercomunicadores para acesso remoto via rede IP. Conheça em
> www.Khomp.com.
> _______________________________________________
> DIGIVOICE Fabricante de Placas de Voz e Channel Bank
> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
> Centro Treinamento - Curso de PABX IP - Asterisk - Site
> www.digivoice.com.br
> _______________________________________________
> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
> _______________________________________________
> Para remover seu email desta lista, basta enviar um email em branco para
> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>
--
Otávio
-------------- Próxima Parte ----------
Um anexo em HTML foi limpo...
URL: http://listas.asteriskbrasil.org/pipermail/asteriskbrasil/attachments/20130415/7487b540/attachment-0001.htm
Mais detalhes sobre a lista de discussão AsteriskBrasil