[AsteriskBrasil] Elastix + Dongle 3g

Everton Carneiro everton em visaotecnologia.com
Segunda Abril 15 17:30:25 BRT 2013


e / ou imei, imsi
coloca só o imei


2013/4/15 Otavio Asterisk <otavioasterisk em gmail.com>

> O imei estava logo abaixo no arquivo, só comentei as linhas citadas:
>
>
> [dongle0]
> ;audio=/dev/ttyUSB2              ; tty port for audio connection;
> no default value
> ;data=/dev/ttyUSB3               ; tty port for AT commands;
> no default value
>
> ; or you can omit both audio and data together and use
> imei=123456789012345 and/or imsi=123456789012345
> ;  imei and imsi must contain exactly 15 digits !
> ;  imei/imsi discovery is available on Linux only
> imei=3586XXXXXXXXXXX
> imsi=7241XXXXXXXXXXX
>
>
>
> 2013/4/15 Everton Carneiro <everton em visaotecnologia.com>
>
>> você usa elastix se sim levante o asterisk com root.
>>
>>
>> 2013/4/15 Otavio Asterisk <otavioasterisk em gmail.com>
>>
>>> com essa configuração no dongle.conf:
>>>
>>>
>>> [dongle0]
>>> ;audio=/dev/ttyUSB2             ; tty port for audio connection;
>>> no default value
>>> ;data=/dev/ttyUSB3              ; tty port for AT commands;
>>> no default value
>>>
>>> ele não acha o dongle.
>>>
>>> sip*CLI> dongle show devices
>>> ID           Group State      RSSI Mode Submode Provider Name
>>> Model      Firmware          IMEI             IMSI             Number
>>> dongle0      0     Not connec 0    0    0
>>> NONE
>>> Unknown
>>>
>>>
>>>
>>> 2013/4/15 Everton Carneiro <everton em visaotecnologia.com>
>>>
>>>> dongle unload chan_dongle.so
>>>> dongle load chan_dongle.so
>>>>
>>>>
>>>> 2013/4/15 Otavio Asterisk <otavioasterisk em gmail.com>
>>>>
>>>>> Vou testar agora!
>>>>> Uma pergunta besta: alterando essas configs no dongle.conf, basta dar
>>>>> um *dongle reload now* no CLI?
>>>>>
>>>>>
>>>>> 2013/4/15 Everton Carneiro <everton em visaotecnologia.com>
>>>>>
>>>>>> tenta comentando:
>>>>>> ;audio=/dev/ttyUSB2              ; tty port for audio
>>>>>> connection;        no default value
>>>>>>
>>>>>> ;data=/dev/ttyUSB3               ; tty port for AT
>>>>>> commands;             no default value
>>>>>> e coloca somente o imei
>>>>>>
>>>>>>
>>>>>>
>>>>>> 2013/4/15 Otavio Asterisk <otavioasterisk em gmail.com>
>>>>>>
>>>>>>> praticamente default, alterei apenas o número da usb, e o meu imei e
>>>>>>> imsi.
>>>>>>>
>>>>>>> [general]
>>>>>>>
>>>>>>> interval=15                     ; Number of seconds between trying
>>>>>>> to connect to devices
>>>>>>>
>>>>>>> ;------------------------------ JITTER BUFFER CONFIGURATION
>>>>>>> --------------------------
>>>>>>> ;jbenable = yes                 ; Enables the use of a jitterbuffer
>>>>>>> on the receiving side of a
>>>>>>>                                 ; Dongle channel. Defaults to "no".
>>>>>>> An enabled jitterbuffer will
>>>>>>>                                 ; be used only if the sending side
>>>>>>> can create and the receiving
>>>>>>>                                 ; side can not accept jitter. The
>>>>>>> Dongle channel can't accept jitter,
>>>>>>>                                 ; thus an enabled jitterbuffer on
>>>>>>> the receive Dongle side will always
>>>>>>>                                 ; be used if the sending side can
>>>>>>> create jitter.
>>>>>>>
>>>>>>> ;jbforce = no                   ; Forces the use of a jitterbuffer
>>>>>>> on the receive side of a Dongle
>>>>>>>                                 ; channel. Defaults to "no".
>>>>>>>
>>>>>>> ;jbmaxsize = 200                ; Max length of the jitterbuffer in
>>>>>>> milliseconds.
>>>>>>>
>>>>>>> ;jbresyncthreshold = 1000       ; Jump in the frame timestamps over
>>>>>>> which the jitterbuffer is
>>>>>>>                                 ; resynchronized. Useful to improve
>>>>>>> the quality of the voice, with
>>>>>>>                                 ; big jumps in/broken timestamps,
>>>>>>> usually sent from exotic devices
>>>>>>>                                 ; and programs. Defaults to 1000.
>>>>>>>
>>>>>>> ;jbimpl = fixed                 ; Jitterbuffer implementation, used
>>>>>>> on the receiving side of a Dongle
>>>>>>>                                 ; channel. Two implementations are
>>>>>>> currently available - "fixed"
>>>>>>>                                 ; (with size always equals to
>>>>>>> jbmaxsize) and "adaptive" (with
>>>>>>>                                 ; variable size, actually the new jb
>>>>>>> of IAX2). Defaults to fixed.
>>>>>>>
>>>>>>> ;jbtargetextra = 40             ; This option only affects the jb
>>>>>>> when 'jbimpl = adaptive' is set.
>>>>>>>                                 ; The option represents the number
>>>>>>> of milliseconds by which the new jitter buffer
>>>>>>>                                 ; will pad its size. the default is
>>>>>>> 40, so without modification, the new
>>>>>>>                                 ; jitter buffer will set its size to
>>>>>>> the jitter value plus 40 milliseconds.
>>>>>>>                                 ; increasing this value may help if
>>>>>>> your network normally has low jitter,
>>>>>>>                                 ; but occasionally has spikes.
>>>>>>>
>>>>>>> ;jblog = no                     ; Enables jitterbuffer frame
>>>>>>> logging. Defaults to "no".
>>>>>>>
>>>>>>> ;-----------------------------------------------------------------------------------
>>>>>>>
>>>>>>> [defaults]
>>>>>>> ; now you can set here any not required device settings as template
>>>>>>> ;   sure you can overwrite in any [device] section this default
>>>>>>> values
>>>>>>>
>>>>>>> context=from-pstn               ; context for incoming calls
>>>>>>> group=0                         ; calling group
>>>>>>> rxgain=0                        ; increase the incoming volume; may
>>>>>>> be negative
>>>>>>> txgain=0                        ; increase the outgoint volume; may
>>>>>>> be negative
>>>>>>> autodeletesms=yes               ; auto delete incoming sms
>>>>>>> resetdongle=yes                 ; reset dongle during initialization
>>>>>>> with ATZ command
>>>>>>> u2diag=-1                       ; set ^U2DIAG parameter on device (0
>>>>>>> = disable everything except modem function) ; -1 not use ^U2DIAG command
>>>>>>> usecallingpres=yes              ; use the caller ID presentation or
>>>>>>> not
>>>>>>> callingpres=allowed_passed_screen ; set caller ID
>>>>>>> presentation          by default use default network settings
>>>>>>> disablesms=no                   ; disable of SMS reading from device
>>>>>>> when received
>>>>>>>                                 ;  chan_dongle has currently a bug
>>>>>>> with SMS reception. When a SMS gets in during a
>>>>>>>                                 ;  call chan_dongle might crash.
>>>>>>> Enable this option to disable sms reception.
>>>>>>>                                 ;  default = no
>>>>>>>
>>>>>>> language=en                     ; set channel default language
>>>>>>> smsaspdu=yes                    ; if 'yes' send SMS in PDU mode,
>>>>>>> feature implementation incomplete and we strongly recommend say 'yes'
>>>>>>> mindtmfgap=45                   ; minimal interval from end of
>>>>>>> previews DTMF from begining of next in ms
>>>>>>> mindtmfduration=80              ; minimal DTMF tone duration in ms
>>>>>>> mindtmfinterval=200             ; minimal interval between ends of
>>>>>>> DTMF of same digits in ms
>>>>>>>
>>>>>>> callwaiting=auto                ; if 'yes' allow incoming calls
>>>>>>> waiting; by default use network settings
>>>>>>>                                 ; if 'no' waiting calls just ignored
>>>>>>> disable=no                      ; OBSOLETED by initstate: if 'yes'
>>>>>>> no load this device and just ignore this section
>>>>>>>
>>>>>>> initstate=start                 ; specified initial state of device,
>>>>>>> must be one of 'stop' 'start' 'remote'
>>>>>>>                                 ;   'remove' same as 'disable=yes'
>>>>>>>
>>>>>>> exten=+1234567890               ; exten for start incoming calls,
>>>>>>> only in case of Subscriber Number not available!, also set to CALLERID(ndid)
>>>>>>>
>>>>>>> dtmf=relax                      ; control of incoming DTMF
>>>>>>> detection, possible values:
>>>>>>>                                 ;   off    - off DTMF tones
>>>>>>> detection, voice data passed to asterisk unaltered
>>>>>>>                                 ;              use this value for
>>>>>>> gateways or if not use DTMF for AVR or inside dialplan
>>>>>>>                                 ;   inband - do DTMF tones detection
>>>>>>>                                 ;   relax  - like inband but with
>>>>>>> relaxdtmf option
>>>>>>>                                 ;  default is 'relax' by
>>>>>>> compatibility reason
>>>>>>>
>>>>>>> ; dongle required settings
>>>>>>> [dongle0]
>>>>>>> audio=/dev/ttyUSB2              ; tty port for audio
>>>>>>> connection;        no default value
>>>>>>> data=/dev/ttyUSB3               ; tty port for AT
>>>>>>> commands;             no default value
>>>>>>>
>>>>>>> ; or you can omit both audio and data together and use
>>>>>>> imei=123456789012345 and/or imsi=123456789012345
>>>>>>> ;  imei and imsi must contain exactly 15 digits !
>>>>>>> ;  imei/imsi discovery is available on Linux only
>>>>>>> imei=XXXXXXXXXXXXXXX
>>>>>>> imsi=XXXXXXXXXXXXXXX
>>>>>>>
>>>>>>> ; if audio and data set together with imei and/or imsi audio and
>>>>>>> data has precedence
>>>>>>> ;   you can use both imei and imsi together in this case exact match
>>>>>>> by imei and imsi required
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Em 15 de abril de 2013 15:41, Everton Carneiro <
>>>>>>> everton em visaotecnologia.com> escreveu:
>>>>>>>
>>>>>>> como esta o aquivo dongle.conf?
>>>>>>>>
>>>>>>>>
>>>>>>>> Em 15 de abril de 2013 15:36, Otavio Asterisk <
>>>>>>>> otavioasterisk em gmail.com> escreveu:
>>>>>>>>
>>>>>>>>> Lista, boa tarde.
>>>>>>>>> Consegui subir o modem, consigo realizar e receber ligações, no
>>>>>>>>> entanto, qnd ligo através do modem, a pessoa q me atende não ouve nada,
>>>>>>>>> apenas um chiado e alto e um pouco da minha voz metalizada. O mesmo ocorre
>>>>>>>>> qnd ligo para o chip q está no modem: ouço a ura do meu pabx toda
>>>>>>>>> metalizada e com muito chiado de fundo.
>>>>>>>>> Alguém já passou por isso ou tem alguma dica?
>>>>>>>>> Abraço a todos!
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Otávio
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>>>>>>> www.Khomp.com.
>>>>>>>>> _______________________________________________
>>>>>>>>> DIGIVOICE  Fabricante de Placas de Voz e Channel Bank
>>>>>>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>>>>>>>>> Centro Treinamento - Curso de PABX IP -  Asterisk  - Site
>>>>>>>>> www.digivoice.com.br
>>>>>>>>> _______________________________________________
>>>>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e
>>>>>>>>> SS7.
>>>>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>>>>>>> _______________________________________________
>>>>>>>>> Para remover seu email desta lista, basta enviar um email em
>>>>>>>>> branco para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> *Everton Carneiro .:*
>>>>>>>> *Visão Tecnologia
>>>>>>>> *
>>>>>>>> *Fortaleza-CE  85-3044 8888 / 3044-8844
>>>>>>>> *
>>>>>>>> *Cel: Tim         85-9665 0888
>>>>>>>> *
>>>>>>>>
>>>>>>>>  Preserve o verde, antes de imprimir veja se realmente é
>>>>>>>> necessário.
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>>>>>> www.Khomp.com.
>>>>>>>> _______________________________________________
>>>>>>>> DIGIVOICE  Fabricante de Placas de Voz e Channel Bank
>>>>>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>>>>>>>> Centro Treinamento - Curso de PABX IP -  Asterisk  - Site
>>>>>>>> www.digivoice.com.br
>>>>>>>> _______________________________________________
>>>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e
>>>>>>>> SS7.
>>>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>>>>>> _______________________________________________
>>>>>>>> Para remover seu email desta lista, basta enviar um email em branco
>>>>>>>> para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Otávio
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>>>>> www.Khomp.com.
>>>>>>> _______________________________________________
>>>>>>> DIGIVOICE  Fabricante de Placas de Voz e Channel Bank
>>>>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>>>>>>> Centro Treinamento - Curso de PABX IP -  Asterisk  - Site
>>>>>>> www.digivoice.com.br
>>>>>>> _______________________________________________
>>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>>>>> _______________________________________________
>>>>>>> Para remover seu email desta lista, basta enviar um email em branco
>>>>>>> para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> *Everton Carneiro .:*
>>>>>> *Visão Tecnologia
>>>>>> *
>>>>>> *Fortaleza-CE  85-3044 8888 / 3044-8844
>>>>>> *
>>>>>> *Cel: Tim         85-9665 0888
>>>>>> *
>>>>>>
>>>>>>  Preserve o verde, antes de imprimir veja se realmente é necessário.
>>>>>>
>>>>>> _______________________________________________
>>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>>>> www.Khomp.com.
>>>>>> _______________________________________________
>>>>>> DIGIVOICE  Fabricante de Placas de Voz e Channel Bank
>>>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>>>>>> Centro Treinamento - Curso de PABX IP -  Asterisk  - Site
>>>>>> www.digivoice.com.br
>>>>>> _______________________________________________
>>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>>>> _______________________________________________
>>>>>> Para remover seu email desta lista, basta enviar um email em branco
>>>>>> para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Otávio
>>>>>
>>>>> _______________________________________________
>>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>>> www.Khomp.com.
>>>>> _______________________________________________
>>>>> DIGIVOICE  Fabricante de Placas de Voz e Channel Bank
>>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>>>>> Centro Treinamento - Curso de PABX IP -  Asterisk  - Site
>>>>> www.digivoice.com.br
>>>>> _______________________________________________
>>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>>> _______________________________________________
>>>>> Para remover seu email desta lista, basta enviar um email em branco
>>>>> para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> *Everton Carneiro .:*
>>>> *Visão Tecnologia
>>>> *
>>>> *Fortaleza-CE  85-3044 8888 / 3044-8844
>>>> *
>>>> *Cel: Tim         85-9665 0888
>>>> *
>>>>
>>>>  Preserve o verde, antes de imprimir veja se realmente é necessário.
>>>>
>>>> _______________________________________________
>>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>>> www.Khomp.com.
>>>> _______________________________________________
>>>> DIGIVOICE  Fabricante de Placas de Voz e Channel Bank
>>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>>>> Centro Treinamento - Curso de PABX IP -  Asterisk  - Site
>>>> www.digivoice.com.br
>>>> _______________________________________________
>>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>>> _______________________________________________
>>>> Para remover seu email desta lista, basta enviar um email em branco
>>>> para asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>>
>>>
>>>
>>>
>>> --
>>> Otávio
>>>
>>> _______________________________________________
>>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>>> www.Khomp.com.
>>> _______________________________________________
>>> DIGIVOICE  Fabricante de Placas de Voz e Channel Bank
>>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>>> Centro Treinamento - Curso de PABX IP -  Asterisk  - Site
>>> www.digivoice.com.br
>>> _______________________________________________
>>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>>> _______________________________________________
>>> Para remover seu email desta lista, basta enviar um email em branco para
>>> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>>
>>
>>
>>
>> --
>> *Everton Carneiro .:*
>> *Visão Tecnologia
>> *
>> *Fortaleza-CE  85-3044 8888 / 3044-8844
>> *
>> *Cel: Tim         85-9665 0888
>> *
>>
>>  Preserve o verde, antes de imprimir veja se realmente é necessário.
>>
>> _______________________________________________
>> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
>> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
>> Intercomunicadores para acesso remoto via rede IP. Conheça em
>> www.Khomp.com.
>> _______________________________________________
>> DIGIVOICE  Fabricante de Placas de Voz e Channel Bank
>> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
>> Centro Treinamento - Curso de PABX IP -  Asterisk  - Site
>> www.digivoice.com.br
>> _______________________________________________
>> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
>> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
>> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
>> _______________________________________________
>> Para remover seu email desta lista, basta enviar um email em branco para
>> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>>
>
>
>
> --
> Otávio
>
> _______________________________________________
> KHOMP: completa linha de placas externas FXO, FXS, GSM e E1;
> Media Gateways de 1 a 64 E1s para SIP com R2, ISDN e SS7;
> Intercomunicadores para acesso remoto via rede IP. Conheça em
> www.Khomp.com.
> _______________________________________________
> DIGIVOICE  Fabricante de Placas de Voz e Channel Bank
> 20 anos de experiência com E1(R2/ISDN), FXS, FXO e GSM
> Centro Treinamento - Curso de PABX IP -  Asterisk  - Site
> www.digivoice.com.br
> _______________________________________________
> ALIGERA – Fabricante nacional de Gateways SIP-E1 para R2, ISDN e SS7.
> Placas de 1E1, 2E1, 4E1 e 8E1 para PCI ou PCI Express.
> Channel Bank – Appliance Asterisk - Acesse www.aligera.com.br.
> _______________________________________________
> Para remover seu email desta lista, basta enviar um email em branco para
> asteriskbrasil-unsubscribe em listas.asteriskbrasil.org
>



-- 
*Everton Carneiro .:*
*Visão Tecnologia
*
*Fortaleza-CE  85-3044 8888 / 3044-8844
*
*Cel: Tim         85-9665 0888
*

 Preserve o verde, antes de imprimir veja se realmente é necessário.
-------------- Próxima Parte ----------
Um anexo em HTML foi limpo...
URL: http://listas.asteriskbrasil.org/pipermail/asteriskbrasil/attachments/20130415/3a7a2106/attachment-0001.htm 


Mais detalhes sobre a lista de discussão AsteriskBrasil